Tektronix TMSST1 User manual

Instruction Manual
TMSST1
775-Pin Socket Hardware Support
071-1315-00
www.tektronix.com

Copyright ©Tektronix, Inc. All rights reserved.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and price change privileges reserved.
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

HARDWARE WARRANTY
Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and
workmanship for a period of one (1) year from the date of shipment. If a product proves defective during this
warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor,
or will provide a replacement in exchange for the defective product.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration
of the warranty period and make suitable arrangements for the performance of service. Customer shall be
responsible for packaging and shipping the defective product to the service center designated by Tektronix, with
shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a
location within the country in which the Tektronix service center is located. Customer shall be responsible for
paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product;
b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been
modified or integrated with other products when the effect of such modification or integration increases the time
or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER WARRANTIES, EXPRESS
OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’
RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.
TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR
THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

TMSST1 775-Pin Socket Hardware Support i
Table of Contents
General Safety Summary v..........................................
Service Safety Summary vii...........................................
Preface ix...................................................
Manual Conventions ix..............................................
Contacting Tektronix x..............................................
Getting Started
Product Description 1--1..............................................
Logic Analyzer Configuration 1--1......................................
P6860 Probes 1--2................................................
LAI Cables 1--2..................................................
Labeling P6860 Probes 1--3........................................
Labeling LAI Cables 1--3..........................................
Standard and Optional Accessories 1--3...................................
Probe Adapter Review 1--3............................................
System Clock Rate 1--3............................................
Acquisition before Reset 1--3.......................................
Data Bus 1--3....................................................
Address Bus 1--3.................................................
Disabling the Cache 1--4...........................................
Connecting the Logic Analyzer to a Target System 1--4......................
Tools 1--4......................................................
Removing the Probe Head from the Target System 1--8...................
Applying LAI Labels 1--9.............................................
Connect the Probes and LAI Cables 1--10..................................
P6860 Probes
(Four Modules) 1--12.......................................
Fifth Module 1--12................................................
Applying and Removing Power 1--12.....................................
Logic Analyzer Software Compatibility 1--13...............................
Installing the Software 1--13............................................
Care and Maintenance 1--14.............................................
External Cleaning Only 1--14........................................
Fuses 1--14......................................................
Short-Term Storage 1--15...........................................
Long-Term Storage 1--16...........................................
Shipping the Probe Adapter 1--18........................................
Specifications
Circuit Description 2--1...............................................
Latched Operation 2--1............................................
Derived Signals 2--2..............................................
Signal Probing 2--2...............................................
Bus Tracking Logic 2--2...........................................
Common Clock 2--2..............................................
Loading Diagrams 2--3................................................

Table of Contents
ii TMSST1 775-Pin Socket Hardware Support
Specification Tables 2--4..............................................
Reference
Reference Tables 3--1..........................................
Viewing Reference Tables 3--1..........................................
To View a Symbol Table 3--1.......................................
To Extract Groups 3--1............................................
Overview of Reference Tables 3--2......................................
Group Definitions 3--2............................................
Symbols 3--2....................................................
Channel Assignments 3--2..........................................
Replaceable Parts List
Parts Ordering Information 4--1.........................................
Using the Replaceable Parts List 4--2.....................................
Index

Table of Contents
TMSST1 775-Pin Socket Hardware Support iii
List of Figures
Figure 1--1: Master and Slave module configuration 1--2.............
Figure 1--2: Attach the custom load plate to the target-system socket 1--5
Figure 1--3: Connect the microprocessor to the probe-head socket 1--6.
Figure 1--4: Attach the probe head to the target system 1--7..........
Figure 1--5: Attach the heat sink to the target system 1--8............
Figure 1--6: Apply LAI labels 1--9................................
Figure 1--7: LAI Cable, P6860 probe, and preprocessor unit 1--10......
Figure 1--8: LAI Cable, P6860 probe, and module configurations 1--11..
Figure 1--9: Nonspecific probe head and case 1--15...................
Figure 1--10: Use static-shielding bags. 1--16........................
Figure 1--11: Place foam in the cardboard carton 1--16...............
Figure 1--12: Place the preprocessor unit in the cardboard carton 1--17.
Figure 1--13: Place the cables carefully over the preprocessor unit 1--17.
Figure 1--14: Place the foam and probe head in place 1--17............
Figure 2--1: Electrical load model for typical signals 2--3.............
Figure 2--2: Mated Samtec load model 2--4........................
Figure 2--3: Receiver load model 2--4.............................
Figure 2--4: Dimensions of the probe head 2--8.....................
Figure 2--5: Dimensions of the preprocessor unit 2--9...............
Figure 4--1: Probe adapter exploded view 4--5......................
List of Tables
Table 1--1: P6860 probe and LAI Cable configurations 1--11..........
Table 2--1: Electrical specifications for the target system 2--4........
Table 2--2: Electrical specifications for the AC input to the
preprocessor unit 2--5......................................
Table 2--3: Environmental specifications 2--5......................
Table 2--4: Certifications and compliances 2--6.....................

Table of Contents
iv TMSST1 775-Pin Socket Hardware Support

TMSST1 775-Pin Socket Hardware Support v
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of the system. Read
the General Safety Summary in other system manuals for warnings and cautions
related to operating the system.
Use Proper Power Cord. Use only the power cord specified for this product and
certified for the country of use.
Connect and Disconnect Properly. Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
Ground the Product. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Connect the ground lead of the probe to earth ground only.
Do Not Operate Without Covers. Do not operate this product with covers or panels
removed.
Use Proper Fuse. Use only the fuse type and rating specified for this product.
Avoid Exposed Circuitry. Do not touch exposed connections and components
when power is present.
Do Not Operate With Suspected Failures. If you suspect there is damage to this
product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation. Refer to the manual’s installation instructions for
details on installing the product so it has proper ventilation.
ToAvoidFireor
Personal Injury

General Safety Summary
vi TMSST1 775-Pin Socket Hardware Support
Terms in this Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Terms on the Product. These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the
marking.
WARNING indicates an injury hazard not immediately accessible as you read the
marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product. The following symbols may appear on the product:
CAUTION
Refer to Manual
WARNING
High Voltage
Protective Ground
(Earth) Terminal
Symbols and Terms

TMSST1 775-Pin Socket Hardware Support vii
Service Safety Summary
Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary before performing any service
procedures.
Do Not Service Alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect Power. To avoid electric shock, switch off the instrument power, then
disconnect the power cord from the mains power.
Use Care When Servicing With Power On. Dangerous voltages or currents may
exist in this product. Disconnect power, remove battery (if applicable), and
disconnect test leads before removing protective panels, soldering, or replacing
components.
To avoid electric shock, do not touch exposed connections.

Service Safety Summary
viii TMSST1 775-Pin Socket Hardware Support

TMSST1 775-Pin Socket Hardware Support ix
Preface
This instruction manual contains specific information about the TMSST1
775-Pin Socket Hardware support product and is part of a set of information on
how to operate this product on compatible Tektronix logic analyzers.
If you are familiar with operating Microprocessor support products on the logic
analyzer, all you need is this instruction manual to set up and run the support
product.
If you are not familiar with operating Microprocessor support products, you need
to supplement this instruction manual with information on basic operations from
the Tektronix logic analyzer online help to set up and run the support product.
Manual Conventions
This manual uses the following conventions:
HThe terms “master” and “slave” refer to modules that are located in specific
slots in a five-wide module chassis (see Figure 1--1 on page 1--2).
HThe term “LAI” is an acronym for Logic Analyzer Interface.
HThe term “interposer” refers to the probe head that is located between the
target system and the microprocessor for the purpose of acquiring signals for
circuit analysis.

Preface
xTMSST1 775-Pin Socket Hardware Support
Contacting Tektronix
Phone [phone]*
Address Tektronix, Inc.
Department or name (if known)
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
Web site www.tektronix.com
Sales support 1-800-833-9200, select option 1*
Service support 1-800-833-9200, select option 2*
Technical support www.tektronix.com/support
1-800-833-9200, select option 3*
6:00 a.m. -- 5:00 p.m. Pacific Standard Time
*This phone number is toll free in North America. After office hours, please leave a voice mail
message.
Outside North America, contact a Tektronix sales office or distributor; see the Tektronix web
site for a list of offices.

Getting Started

TMSST1 775-Pin Socket Hardware Support 1--1
Getting Started
This section contains the following information on the TMSST1 775-Pin Socket
hardware product.
HConnecting the logic analyzer to the target system, see page 1--4
HApplying power to the probe adapter, see page 1--12
HInstalling software, see page 1--13
HCaring for and maintaining the probe adapter, see page 1--14
Product Description
The TMSST1 probe adapter is an interposer design that allows the logic analyzer
to acquire data from a Microprocessor in the operating environment with little
effect on the target system.
To accomplish this, the probe adapter is connected to the target system, and then
the microprocessor is connected to the probe adapter. Signals from the Micropro-
cessor based system flow through the probe adapter probe cables and to the logic
analyzer.
This software acquires signals for viewing along with timing signals. Included
with the TMSST1 775-Pin Socket probe adapter is the following software:
HPUB32G9 software — acquires signals using four modules
NOTE. The TMSST1 probe Adapter is compatible with the TMS118 IA32G9
software support package. This software support package is available only to
customers with a valid, restricted, secret nondisclosure agreement (RS-NDA)
with Intel.
Logic Analyzer Configuration
To use the probe adapter to acquire most signals, you need a Tektronix logic
analyzer equipped with a minimum of four, 136-channel, 450 MHz merged
modules. To also acquire auxiliary common clock signals, you need five,
136-channel, 450 MHz merged modules.

Getting Started
1--2 TMSST1 775-Pin Socket Hardware Support
The modules must be configured and merged as shown in Figure 1--1. The
memory depth is chosen automatically based on the shallowest memory depth of
the four modules.
M
A
S
T
E
R
S
L
A
V
E
2
S
L
A
V
E
4
S
L
A
V
E
1
S
L
A
V
E
3
Most signals
Plus auxiliary common
clock signals
Figure 1--1: Master and Slave module configuration
The term Master module refers to the middle module of a 5-wide module merge.
The term Slave module refers to the modules to the left or right of the Master
module of a 4 or 5-wide module merge. Figure 1--1 shows the configuration for a
4- or 5-wide module merge.
You can use the TLA7AX, 450 MHz logic analyzer modules and P6860 probes
to connect to the TMSST1 probe adapter.
For more information on connecting your P6860 probes to the preprocessor unit,
see page 1--10.
Refer to the P6810, P6860, and P6880 Logic Analyzer Probes Instruction
Manual, Tektronix part number 071-1059-XX, for more information. You can
access this manual from the Tektronix.com web site. You can also find informa-
tion about the P6860 probes in the logic analyzer online help.
You can use the TLA7AX, 450 MHz logic analyzer modules, and LAI cables to
connect to the TMSST1 probe Adapter. The LAI cables are specifically designed
for use with the TMSST1 probe Adapter.
P6860 Probes
LAI Cables

Getting Started
TMSST1 775-Pin Socket Hardware Support 1--3
For more information on connecting your LAI cables to the preprocessor unit,
see page 1--10.
The probe adapter relies on the default channel mapping and labeling scheme for
the probes. Apply labels using the instructions described in the P6860 High
Density Logic Analyzer Probe Label Instructions, Tektronix part number
071-1123-XX.This manual can be accessed from the Tektronix.com web site.
This information is also located in the logic analyzer online help.
To apply labels to the LAI cables, see page 1--9.
Standard and Optional Accessories
A complete list of standard and optional accessories is provided in the Replace-
able Parts List on page 4--4.
Probe Adapter Review
Along with the TMSST1 instruction manual, each logic analyzer includes
additional information that describes how to perform tasks common to support
products on that platform.
This additional information is located in the logic analyzer online help, an
installation manual, or a user manual. Review the additional information if you
are unfamiliar with using support products on a logic analyzer product.
Review electrical, environmental, and mechanical specifications in the Specifica-
tions section on page 2--1 as they pertain to the target system, as well as the
following information.
The TMSST1 hardware support can acquire data from the Microprocessor
operating at speeds of up to 266 MHz.
Contact the Tektronix sales representative for current information on the fastest
devices supported.
If data is acquired just before a power on Reset signal is observed by the target
system, the data acquired by the logic analyzer will be inaccurate.
The TMSST1 probe Adapter supports only a quad-pumped data bus.
The TMSST1 probe Adapter supports only a double-pumped address bus.
Labeling P6860 Probes
Labeling LAI Cables
System Clock Rate
Acquisition before Reset
Data Bus
Address Bus

Getting Started
1--4 TMSST1 775-Pin Socket Hardware Support
The cache bus is not monitored; therefore, the cache must be disabled. Disabling
the cache makes all instruction prefetches visible on the bus so that they are
acquired and displayed and correctly disassembled.
Connecting the Logic Analyzer to a Target System
WARNING. To prevent static damage to the Microprocessor, the probe adapter, the
probes, and the module, you must handle components only in a static-free
environment. Always wear a grounding wrist strap, heel strap, or similar device
while handling the Microprocessor and probe adapter.
To prevent harm to yourself or damage to the preprocessor unit, do not open the
preprocessor unit. There are no operator serviceable parts inside the preproces-
sor unit. Refer servicing of internal parts in the preprocessor unit to Tektronix
authorized personnel only. External parts may be replaced by qualified service
personnel.
You must allow airflow clearance for the preprocessor unit. Refer to the
dimensions on page 2--6 for the required clearance.
Following is a list of tools:
HUse a flatbladed screwdriver (0.1 inch tip width) to tighten the probe head to
the target system.
HOptional Tool. A torque wrench helps to ensure reliable connections by
meeting the nominal torque values listed in these instructions. When
attaching screws to the probe head use 4 in-lbs (0.451 N Gm) of torque,
unless stated otherwise.
NOTE. For storage and shipping, retain the cardboard cartons and packing
material that is shipped with the probe adapter.
Disabling the Cache
Tools