Tektronix Phaser 140 Instruction Manual

Release Note
Phaser
ª
140
Color Printer
Copyright © 1995 by Tektronix, Inc., Wilsonville, Oregon. Printed in the United States of America.
All rights reserved. Contents of this publication may not be reproduced in any form without
permission of Tektronix, Inc.
February 1995 Part Number 070-9069-IA

User Manual Release Note
1
Shipping your printer
Follow these instructions for shipping a printer for servicing. These
instructions replace those given in Appendix C of the
Phaser 140 Color Printer
User Manual
.
Does the printer power up?
1.
Remove the interface cable.
2.
Make sure the printer is turned on (if the printer powers up). If
the printer does not power up, remove the power cord now.
Park the carriage in the home position
1.
Open the top cover.
2.
Make sure that the carriage is in its home position (at the right
front of the printer). If not, move it to the home position by hand.
9069-63

2
Phaser 140 Color Printer
Remove all ink cartridges
1.
To remove an ink cartridge, lift the end of the cartridge, then pull
it out.
2.
Store the cartridges individually in plastic bags to avoid spilling
ink.
Do not ship the ink cartridges with the printer
.
9069-41

User Manual Release Note
3
Clean the ink jets
If the front panel display is working, clean the ink jets as described in this
procedure. If the printer is damaged such that the ink jets cannot be cleaned,
go on to ÒRemove the print head.Ó
1.
Close the top cover.
2.
On the front panel, press the down arrow
(ß
) key until the front
panel displays this message:
CLEAN HEADS
3.
Press the right arrow (
Þ
) key until the front panel displays this
message:
clean heads
4.
Press the
SELECT
button. The printer cleans the ink jets. During
the cleaning process, you cannot display other menus or menu
choices. When the cleaning is complete, the front panel continues
to display the
clean heads
message.
5.
Press the right (
Þ
) arrow key until the front panel displays this
message:
quit menu
6.
Press the
SELECT
button; the front panel displays this message:
ready
7.
Press the
POWER
button to turn off the printer.
SELECT
POWER

4
Phaser 140 Color Printer
Remove the print head
Note
Remove the printhead with the printer plugged in and the power
turned off via the
POWER
button. Otherwise, a printhead error
may occur.
1.
Open the printerÕs cover. While pressing the tabs on either side of
the printhead compartment cover, lift open the cover until it stops.
2.
Remove the printhead. Store the print head in a plastic bag.
Do
not ship the print head with the printer
.
9069-48
9069-49

User Manual Release Note
5
3.
Close the compartment cover by pressing down on the white
marks (
a
) until the coverÕs sides reach the upper part of the frame
sides (
b
).
a
b
9069-13A

6
Phaser 140 Color Printer
Pack the printer for shipment
1.
If you have not already done so, remove the power cord.
2.
Secure the carriage with tape.
3.
Secure the top cover, the output tray, and the input tray with tape.
9069-64a
9069-61

User Manual Release Note
7
4.
Place the printer in its original carton, making sure that it is well
cushioned with the packing materials.
To obtain the appropriate shipping address and procedure:
■
In the U.S.A. and Canada, call the Tektronix Customer Support
Hotline at
1-800-835-6100
.
■
Outside the U.S.A. and Canada, contact your local Tektronix dealer
or Tektronix sales representative.
9069-62

User Manual
Phaserª 140
Color Printer
First printing October 1994
070-9069-00

Copyright
©
1994 by Tektronix, Inc., Wilsonville, Oregon. Printed in the United States of America.
All rights reserved. Contents of this publication may not be reproduced in any form without permission of
Tektronix, Inc.
This product, in whole or in part, may be protected by one or more U.S. or foreign patents or patent
applications. Information provided upon request from Tektronix, Inc., P.O. Box 1000, Wilsonville, Oregon
97070-1000.
If acquired subject to FAR or DFARS, the following shall apply:
■
Unpublished Ñ rights reserved under the copyright laws of the United States.
■
Restricted Rights Legend Ñ Use, duplication, or disclosures by the U.S. government is subject to restrictions
as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS
252.227-7013, or in subparagraph (c) (2) of the Commercial Computer Software Ð Restricted Rights clause at
FAR 52.227-19, as applicable. Tektronix, Inc., P.O. Box 1000, Wilsonville, Oregon 97070-1000.
Tektronix
¨
is a registered trademark of Tektronix, Inc. TekColorª, and Finepointª are trademarks of
Tektronix, Inc. Phaserª is a trademark of Tektronix, Inc. for color printers and related products.
Adobeª and PostScriptª are trademarks of Adobe Systems, Incorporated which may be registered in certain
jurisdictions.
Timesª, Helveticaª and Palatinoª are trademarks of Linotype-Hell AG and/or its subsidiaries.
Other marks are trademarks or registered trademarks of the companies with which they are associated.
PANTONE
¨
*
Colors generated by the Phaser 140 are four-color process simulations and may not match
PANTONE-identiÞed solid color standards. Use current PANTONE Color Reference Manuals for accurate
colors.
PANTONE Color simulations are only obtainable on these products when driven by qualiÞed Pantone-licensed
software packages. Contact Pantone, Inc. for a current list of qualiÞed licensees.
*
Pantone, Inc.Õs check-standard trademark for color reproduction and color reproduction materials.
© Pantone, Inc., 1988.