Teldat bintec R3002 User manual

Manual
bintec Rxxx2/RTxxx2
Reference
Copyright© Version 7.0, 2013 Teldat GmbH
Teldat GmbH Manual
bintec Rxxx2/RTxxx2 1

Legal Notice
Aim and purpose
This document is part of the user manual for the installation and configuration of Teldat devices. For
the latest information and notes on the current software release, please also read our release notes,
particularly if you are updating your software to a higher release version. You will find the latest release
notes under www.teldat.de .
Liability
This manual has been put together with the greatest possible care. However, the information con-
tained in this manual is not a guarantee of the properties of your product. Teldat GmbH is only liable
within the terms of its conditions of sale and supply and accepts no liability for technical inaccuracies
and/or omissions.
The information in this manual can be changed without notice. You will find additional information and
also release notes for Teldat devices under www.teldat.de .
Teldat devices make WAN connections as a possible function of the system configuration. You must
monitor the product in order to avoid unwanted charges. Teldat GmbH accepts no responsibility for
data loss, unwanted connection costs and damage caused by unintended operation of the product.
Trademarks
Teldat trademarks and the Teldat logo, bintec trademarks and the bintec logo, elmeg trademarks and
the elmeg logo are registered trademarks of Teldat GmbH.
Company and product names mentioned are usually trademarks of the companies or manufacturers
concerned.
Copyright
All rights reserved. No part of this manual may be reproduced or further processed in any way without
the written consent of Teldat GmbH. The documentation may not be processed and, in particular,
translated without the consent of Teldat GmbH.
You will find information on guidelines and standards in the declarations of conformity under
www.teldat.de .
How to reach Teldat GmbH
Teldat GmbH, Südwestpark 94, D-90449 Nuremberg, Germany, Phone: [phone], Fax: +49 911
688 07 25
Teldat France S.A.S., 6/8 Avenue de la Grande Lande, F-33174 Gradignan, France, Phone: +33 5 57
35 63 00, Fax: [phone]
Internet: www.teldat.de
Manual Teldat GmbH
2bintec Rxxx2/RTxxx2

Table of Contents
Chapter1 Introduction...........................1
Chapter 2 About this guide. . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter3 Installation............................6
3.1 Setting up and connecting . . . . . . . . . . . . . . . . . . . . . . 6
3.2 Cleaning.............................. 8
3.3 Supportinformation......................... 9
Chapter4 Reset............................. 10
Chapter 5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 Scopeofsupply ......................... 11
5.2 General Product Features . . . . . . . . . . . . . . . . . . . . . 13
5.3 LEDs.............................. 23
5.4 Connectors ........................... 25
5.5 PinAssignments......................... 29
5.5.1 Serialinterface.......................... 29
5.5.2 Ethernet interface. . . . . . . . . . . . . . . . . . . . . . . . . 29
5.5.3 ADSLinterface ......................... 30
5.5.4 SHDSLinterface......................... 31
5.5.5 VDSL2interface......................... 32
5.5.6 ISDN-PRI interface . . . . . . . . . . . . . . . . . . . . . . . . 32
5.5.7 ISDN BRI interface . . . . . . . . . . . . . . . . . . . . . . . . 33
5.5.8 FXSinterface .......................... 34
5.6 WEEEinformation........................ 35
Teldat GmbH Table of Contents
bintec Rxxx2/RTxxx2 i

Chapter 6 Variable switching of S0 interfaces . . . . . . . . . . . . . 37
6.1 Switching the S0 interfaces from external to internal . . . . . . . . . 37
Chapter 7 Basic configuration . . . . . . . . . . . . . . . . . . . . . . 41
7.1 Presettings ........................... 41
7.1.1 Preconfigured data . . . . . . . . . . . . . . . . . . . . . . . . 41
7.1.2 Softwareupdate......................... 41
7.2 System requirements . . . . . . . . . . . . . . . . . . . . . . . 42
7.3 Preparation........................... 42
7.3.1 Gatheringdata.......................... 42
7.3.2 ConfiguringaPC......................... 44
7.4 Modify system password. . . . . . . . . . . . . . . . . . . . . . 45
7.5 Setting up an internet connection . . . . . . . . . . . . . . . . . . 46
7.5.1 Internet connection over internal ADSL modem . . . . . . . . . . . . 46
7.5.2 Other internet connections . . . . . . . . . . . . . . . . . . . . . 47
7.5.3 Testing the configuration. . . . . . . . . . . . . . . . . . . . . . 47
7.6 SoftwareUpdate......................... 47
Chapter 8 Access and configuration. . . . . . . . . . . . . . . . . . . 49
8.1 AccessOptions.......................... 49
8.1.1 AccessviaLAN ......................... 49
8.1.2 Access via the Serial Interface . . . . . . . . . . . . . . . . . . . 52
8.1.3 AccessoverISDN ........................ 54
8.2 Login.............................. 54
8.2.1 User names and passwords in ex works state . . . . . . . . . . . . 55
8.2.2 Logging in for Configuration . . . . . . . . . . . . . . . . . . . . 55
8.3 Configuration options . . . . . . . . . . . . . . . . . . . . . . . 56
Table of Contents Teldat GmbH
ii bintec Rxxx2/RTxxx2

8.3.1 GUI (Graphical User Interface) . . . . . . . . . . . . . . . . . . . 57
8.3.2 SNMPshell........................... 66
8.4 BOOTmonitor.......................... 66
Chapter9 Assistants........................... 69
Chapter 10 System Management . . . . . . . . . . . . . . . . . . . . . 70
10.1 Status.............................. 70
10.2 GlobalSettings.......................... 73
10.2.1 System............................. 73
10.2.2 Passwords............................ 75
10.2.3 DateandTime.......................... 77
10.2.4 SystemLicences......................... 82
10.3 Interface Mode / Bridge Groups . . . . . . . . . . . . . . . . . . 84
10.3.1 Interfaces............................ 86
10.4 Administrative Access . . . . . . . . . . . . . . . . . . . . . . . 89
10.4.1 Access............................. 89
10.4.2 SSH .............................. 91
10.4.3 SNMP.............................. 95
10.5 Remote Authentication . . . . . . . . . . . . . . . . . . . . . . 96
10.5.1 RADIUS............................. 96
10.5.2 TACACS+............................ 102
10.5.3 Options............................. 105
10.6 Certificates ........................... 106
10.6.1 Certificate List . . . . . . . . . . . . . . . . . . . . . . . . . . 107
10.6.2 CRLs.............................. 116
10.6.3 Certificate Servers . . . . . . . . . . . . . . . . . . . . . . . . 118
Chapter 11 Physical Interfaces . . . . . . . . . . . . . . . . . . . . . 119
Teldat GmbH Table of Contents
bintec Rxxx2/RTxxx2 iii

11.1 AUX .............................. 119
11.1.1 AUX .............................. 119
11.2 EthernetPorts.......................... 122
11.2.1 Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . 123
11.3 ISDNPorts ........................... 125
11.3.1 ISDN Configuration . . . . . . . . . . . . . . . . . . . . . . . . 125
11.3.2 MSN Configuration . . . . . . . . . . . . . . . . . . . . . . . . 134
11.4 DSLModem........................... 137
11.4.1 DSL Configuration . . . . . . . . . . . . . . . . . . . . . . . . 137
11.5 SHDSL............................. 141
11.5.1 SHDSL Configuration . . . . . . . . . . . . . . . . . . . . . . . 141
Chapter12 LAN............................. 145
12.1 IPConfiguration......................... 145
12.1.1 Interfaces............................ 145
12.2 VLAN.............................. 149
12.2.1 VLANs ............................. 151
12.2.2 Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . 152
12.2.3 Administration.......................... 152
Chapter 13 Wireless LAN Controller . . . . . . . . . . . . . . . . . . 154
13.1 Wizard ............................. 154
13.1.1 BasicSettings.......................... 155
13.1.2 RadioProfile........................... 156
13.1.3 Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . 156
13.1.4 Start automatic installation . . . . . . . . . . . . . . . . . . . . . 158
13.2 Controller Configuration . . . . . . . . . . . . . . . . . . . . . . 160
13.2.1 General............................. 160
13.3 Slave AP configuration . . . . . . . . . . . . . . . . . . . . . . 162
Table of Contents Teldat GmbH
iv bintec Rxxx2/RTxxx2

13.3.1 Slave Access Points . . . . . . . . . . . . . . . . . . . . . . . 163
13.3.2 RadioProfiles.......................... 167
13.3.3 Wireless Networks (VSS) . . . . . . . . . . . . . . . . . . . . . 174
13.4 Monitoring............................ 181
13.4.1 ActiveClients .......................... 181
13.4.2 Wireless Networks (VSS) . . . . . . . . . . . . . . . . . . . . . 182
13.4.3 LoadBalancing ......................... 182
13.4.4 NeighborAPs.......................... 183
13.4.5 RogueAPs ........................... 184
13.4.6 RogueClients.......................... 185
13.5 Maintenance........................... 186
13.5.1 Firmware Maintenance . . . . . . . . . . . . . . . . . . . . . . 186
Chapter14 Networking......................... 189
14.1 Routes............................. 189
14.1.1 IPv4Routes........................... 189
14.1.2 IPv4 Routing Table . . . . . . . . . . . . . . . . . . . . . . . . 195
14.1.3 Options............................. 196
14.2 NAT............................... 197
14.2.1 NATInterfaces.......................... 197
14.2.2 NAT Configuration . . . . . . . . . . . . . . . . . . . . . . . . 199
14.3 LoadBalancing.......................... 205
14.3.1 Load Balancing Groups . . . . . . . . . . . . . . . . . . . . . . 205
14.3.2 Special Session Handling . . . . . . . . . . . . . . . . . . . . . 209
14.4 QoS .............................. 213
14.4.1 QoSFilter............................ 213
14.4.2 QoS Classification . . . . . . . . . . . . . . . . . . . . . . . . 216
14.4.3 QoS Interfaces/Policies . . . . . . . . . . . . . . . . . . . . . . 219
14.5 AccessRules .......................... 226
14.5.1 AccessFilter .......................... 228
Teldat GmbH Table of Contents
bintec Rxxx2/RTxxx2 v

14.5.2 RuleChains........................... 232
14.5.3 Interface Assignment . . . . . . . . . . . . . . . . . . . . . . . 233
14.6 DropIn............................. 235
14.6.1 DropInGroups.......................... 235
Chapter 15 Routing Protocols. . . . . . . . . . . . . . . . . . . . . . 239
15.1 RIP............................... 239
15.1.1 RIPInterfaces.......................... 239
15.1.2 RIPFilter............................ 241
15.1.3 RIPOptions........................... 244
15.2 OSPF ............................. 246
15.2.1 Areas.............................. 248
15.2.2 Interfaces............................ 250
15.2.3 Global Settings . . . . . . . . . . . . . . . . . . . . . . . . . 252
Chapter16 Multicast........................... 254
16.1 General............................. 255
16.1.1 General............................. 256
16.2 IGMP.............................. 256
16.2.1 IGMP.............................. 257
16.2.2 Options............................. 259
16.3 Forwarding ........................... 261
16.3.1 Forwarding ........................... 261
16.4 PIM .............................. 262
16.4.1 PIMInterfaces.......................... 262
16.4.2 PIM Rendezvous Points . . . . . . . . . . . . . . . . . . . . . . 266
16.4.3 PIMOptions........................... 267
Chapter17 WAN............................. 269
Table of Contents Teldat GmbH
vi bintec Rxxx2/RTxxx2

17.1 Internet+Dialup......................... 269
17.1.1 PPPoE............................. 271
17.1.2 PPTP.............................. 277
17.1.3 PPPoA............................. 282
17.1.4 ISDN.............................. 286
17.1.5 AUX .............................. 295
17.1.6 IPPools............................. 302
17.2 ATM .............................. 303
17.2.1 Profiles............................. 304
17.2.2 Service Categories . . . . . . . . . . . . . . . . . . . . . . . . 309
17.2.3 OAM Controlling . . . . . . . . . . . . . . . . . . . . . . . . . 311
17.3 LeasedLine........................... 315
17.3.1 Interfaces............................ 316
17.4 Real Time Jitter Control . . . . . . . . . . . . . . . . . . . . . . 322
17.4.1 Controlled Interfaces . . . . . . . . . . . . . . . . . . . . . . . 322
Chapter18 VPN............................. 324
18.1 IPSec.............................. 324
18.1.1 IPSecPeers........................... 325
18.1.2 Phase-1 Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 341
18.1.3 Phase-2 Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 349
18.1.4 XAUTHProfiles ......................... 354
18.1.5 IPPools............................. 356
18.1.6 Options............................. 357
18.2 L2TP.............................. 360
18.2.1 TunnelProfiles.......................... 361
18.2.2 Users.............................. 364
18.2.3 Options............................. 370
18.3 PPTP.............................. 371
18.3.1 PPTPTunnels.......................... 371
Teldat GmbH Table of Contents
bintec Rxxx2/RTxxx2 vii

18.3.2 Options............................. 378
18.3.3 IPPools............................. 379
18.4 GRE.............................. 380
18.4.1 GRETunnels .......................... 381
Chapter19 Firewall........................... 383
19.1 Policies............................. 384
19.1.1 FilterRules ........................... 384
19.1.2 QoS .............................. 388
19.1.3 Options............................. 389
19.2 Interfaces............................ 391
19.2.1 Groups............................. 391
19.3 Addresses............................ 392
19.3.1 AddressList........................... 392
19.3.2 Groups............................. 393
19.4 Services............................. 394
19.4.1 ServiceList........................... 394
19.4.2 Groups............................. 396
Chapter20 VoIP ............................ 398
20.1 Application Level Gateway . . . . . . . . . . . . . . . . . . . . . 398
20.1.1 SIPProxies........................... 398
20.1.2 SIPEndpoints.......................... 400
20.2 MediaGateway.......................... 402
20.2.1 Extensions............................ 403
20.2.2 SIPAccounts .......................... 408
20.2.3 CallRouting........................... 415
20.2.4 CLID Translation . . . . . . . . . . . . . . . . . . . . . . . . . 419
20.2.5 Call Translation. . . . . . . . . . . . . . . . . . . . . . . . . . 421
20.2.6 ISDNTrunks .......................... 423
Table of Contents Teldat GmbH
viii bintec Rxxx2/RTxxx2

20.2.7 Options............................. 424
20.3 RTSP.............................. 427
20.3.1 RTSPProxy........................... 428
Chapter 21 Local Services . . . . . . . . . . . . . . . . . . . . . . . 429
21.1 DNS .............................. 429
21.1.1 GlobalSettings.......................... 431
21.1.2 DNSServers .......................... 433
21.1.3 StaticHosts........................... 435
21.1.4 Domain Forwarding . . . . . . . . . . . . . . . . . . . . . . . . 436
21.1.5 Cache.............................. 438
21.1.6 Statistics ............................ 439
21.2 HTTPS............................. 440
21.2.1 HTTPSServer.......................... 440
21.3 DynDNSClient.......................... 441
21.3.1 DynDNSUpdate......................... 441
21.3.2 DynDNS Provider. . . . . . . . . . . . . . . . . . . . . . . . . 443
21.4 DHCPServer .......................... 445
21.4.1 IP Pool Configuration . . . . . . . . . . . . . . . . . . . . . . . 445
21.4.2 DHCP Configuration . . . . . . . . . . . . . . . . . . . . . . . 446
21.4.3 IP/MACBinding ......................... 450
21.4.4 DHCP Relay Settings . . . . . . . . . . . . . . . . . . . . . . . 451
21.5 WebFilter............................ 452
21.5.1 General............................. 453
21.5.2 FilterList ............................ 455
21.5.3 Black / White List . . . . . . . . . . . . . . . . . . . . . . . . . 457
21.5.4 History ............................. 458
21.6 CAPIServer........................... 458
21.6.1 User .............................. 458
21.6.2 Options............................. 459
Teldat GmbH Table of Contents
bintec Rxxx2/RTxxx2 ix

21.7 Scheduling............................ 460
21.7.1 Trigger............................. 461
21.7.2 Actions............................. 467
21.7.3 Options............................. 477
21.8 Surveillance........................... 478
21.8.1 Hosts.............................. 478
21.8.2 Interfaces............................ 481
21.8.3 Temperature .......................... 482
21.8.4 PingGenerator.......................... 484
21.9 ISDN Theft Protection . . . . . . . . . . . . . . . . . . . . . . . 485
21.9.1 Options............................. 485
21.10 UPnP.............................. 487
21.10.1 Interfaces............................ 488
21.10.2 General............................. 489
21.11 HotSpotGateway......................... 490
21.11.1 HotSpot Gateway . . . . . . . . . . . . . . . . . . . . . . . . . 491
21.11.2 Options............................. 495
21.12 BRRP ............................. 496
21.12.1 Virtual Routers . . . . . . . . . . . . . . . . . . . . . . . . . . 497
21.12.2 VR Synchronisation . . . . . . . . . . . . . . . . . . . . . . . 503
21.12.3 Options............................. 504
Chapter 22 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 506
22.1 Diagnostics........................... 506
22.1.1 PingTest............................ 506
22.1.2 DNSTest............................ 507
22.1.3 Traceroute Test . . . . . . . . . . . . . . . . . . . . . . . . . 507
22.2 Software &Configuration. . . . . . . . . . . . . . . . . . . . . . 508
22.2.1 Options............................. 508
Table of Contents Teldat GmbH
xbintec Rxxx2/RTxxx2

22.3 Reboot............................. 514
22.3.1 SystemReboot.......................... 514
Chapter 23 External Reporting . . . . . . . . . . . . . . . . . . . . . 515
23.1 Syslog ............................. 515
23.1.1 SyslogServers.......................... 515
23.2 IPAccounting.......................... 518
23.2.1 Interfaces............................ 518
23.2.2 Options............................. 518
23.3 AlertService........................... 520
23.3.1 AlertRecipient.......................... 520
23.3.2 AlertSettings .......................... 523
23.4 SNMP.............................. 525
23.4.1 SNMP Trap Options. . . . . . . . . . . . . . . . . . . . . . . . 525
23.4.2 SNMP Trap Hosts . . . . . . . . . . . . . . . . . . . . . . . . 526
23.5 ActivityMonitor.......................... 527
23.5.1 Options............................. 528
Chapter24 Monitoring.......................... 530
24.1 InternalLog........................... 530
24.1.1 System Messages . . . . . . . . . . . . . . . . . . . . . . . . 530
24.2 IPSec.............................. 531
24.2.1 IPSecTunnels.......................... 531
24.2.2 IPSec Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . 533
24.3 ISDN/Modem .......................... 534
24.3.1 CurrentCalls........................... 534
24.3.2 CallHistory ........................... 535
24.4 Interfaces............................ 536
24.4.1 Statistics ............................ 536
Teldat GmbH Table of Contents
bintec Rxxx2/RTxxx2 xi

24.5 Bridges............................. 539
24.5.1 br<x>.............................. 539
24.6 HotSpotGateway ........................ 539
24.6.1 HotSpot Gateway . . . . . . . . . . . . . . . . . . . . . . . . 539
24.7 QoS .............................. 540
24.7.1 QoS .............................. 540
24.8 OSPF ............................. 541
24.8.1 Status ............................. 541
24.8.2 Statistics ............................ 543
24.9 PIM .............................. 545
24.9.1 GlobalStatus .......................... 545
24.9.2 Not Interface-Specific Status . . . . . . . . . . . . . . . . . . . . 546
24.9.3 Interface-Specific States . . . . . . . . . . . . . . . . . . . . . 549
Glossary........................... 553
Index ............................ 594
Table of Contents Teldat GmbH
xii bintec Rxxx2/RTxxx2

Chapter 1 Introduction
The powerful gateways R1202 /R3002 /R3502 /R3802 /R4402 /RT1202 /RT3002 /
RT3502 /RT4202 have been specially developed for high-speed Internet access and for
VPN connections in SMEs and branch offices.
Safety notices
The safety precautions brochure, which is supplied with your device, tells you what you
need to take into consideration when using your Teldat gateway.
Installation
How to connect your device is shown in Setting up and connecting on page 6. This
chapter also tells you what preliminary tasks are necessary for configuration.
Configuration
How to get your device running is explained in Basic configuration on page 41. There we
show you how to start up your device from a Windows PC and how to install other useful
online assistants. At the end of the chapter, you will be in a position to surf the Internet,
send or receive e-mails and set up a connection to a partner network to access data at
your company head office, for example.
Password
If you are already familiar with configuring Teldat devices and want to get started right
away, all you really need to know is the factory default user name and password.
Note
User Name:
Password:
Note
Remember to change the password immediately when you log in to the device for the
first time. All Teldat devices are supplied with the same password, which means they
are not protected against unauthorised access until you change the password. How to
change the passwords is described in chapter Modify system password on page 45.
Teldat GmbH 1 Introduction
bintec Rxxx2/RTxxx2 1

Workshops
Step-by-step instructions for the most important configuration tasks can be found in the
separate Application Workshop guide for each application, which can be downloaded
from the www.teldat.de website under Solutions.
Dime Manager
The devices are also designed for use with Dime Manager. The Dime Manager manage-
ment tool can locate your Teldat devices within the network quickly and easily. The
.NET-based application, which is designed for up to 50 devices, offers easy to use func-
tions and a comprehensive overview of devices, their parameters and files.
All devices in the local network, including remote devices that can be reached over SNMP,
are located using SNMP Multicast irrespective of their current IP address. A new IP ad-
dress and password and other parameters can also be assigned. A configuration can then
be initiated over HTTP or TELNET. If using HTTP, the Dime Manager automatically logs in-
to the devices on your behalf.
System software files and configuration files can be managed individually as required or in
logical groups for devices of the same type.
You can find the Dime Manager on the enclosed product DVD.
1 Introduction Teldat GmbH
2bintec Rxxx2/RTxxx2

Chapter 2 About this guide
This document is valid for Teldat devices with system software as of software version 9.1.2.
The Reference, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter Description
Introduction You see an overview of the device:
About this guide We explain the various components of this manual and how to
use it.
Installation This contains instructions for how to set up and connect your
device.
Basic configuration This chapter provides a step-by-step guide to the basic func-
tions on your device.
Reset This chapter explains how to reset your device to the ex works
state.
Technical data This section contains a description of all the device's technical
properties.
Variable switching of S0
interfaces
This section describes how to switch the S0 interfaces from ex-
ternal to internal.
Access and configura-
tion
This includes explanations about the different access and con-
figuration methods.
Assistants
System Management
Physical Interfaces
LAN
Wireless LAN Control-
ler
Networking
Routing Protocols
Multicast
All the configuration options of the GUI are described in this
chapter. The individual menus are described in the order of nav-
igation.
The individual chapters also contain more detailed explanations
on the subsystem in question.
Teldat GmbH 2 About this guide
bintec Rxxx2/RTxxx2 3

Chapter Description
WAN
VPN
Firewall
VoIP
Local Services
Maintenance
External Reporting
Monitoring
Glossary The glossary contains a reference to the most important tech-
nical terms used in network technology.
Index The index lists all the key terms for operating the device and all
the configuration options and gives page numbers so they can
be found easily.
To help you locate information easily, this user's guide uses the following visual aids:
List of visual aids
Symbol Use
Indicates practical information.
Indicates general and important points.
Indicates a warning of risk level Attention (points out possible
dangers that may cause damage to property if not observed).
2 About this guide Teldat GmbH
4bintec Rxxx2/RTxxx2

Symbol Use
Indicates a warning of risk level Warning (points out possible
dangers that may cause physical injury or even death if not ob-
served).
The following typographical elements are used to help you find and interpret the informa-
tion in this user's guide:
Typographical elements
Typographical element Use
•Indicates lists.
Menu->Submenu
File->Open
Indicates menus and submenus in the GUI and in the Windows
interface.
non-proportional
(Courier), e.g. 

Indicates commands that you must enter as written.
bold, e.g. Windows
Start menu
Indicates keys, key combinations and Windows terms.
bold, e.g. Licence Key Identifies fields in the GUI.
italic, e.g.  Indicates values that you enter or that can be configured.
Online: blue and italic,
e.g. www.teldat.de
Indicates hyperlinks.
Teldat GmbH 2 About this guide
bintec Rxxx2/RTxxx2 5

Chapter 3 Installation
Caution
Please read the safety notices carefully before installing and starting up your device.
These are supplied with the device.
3.1 Setting up and connecting
Note
All you need for this is the cable supplied with the equipment.
Caution
Incorrect cabling of the ISDN and ETH interfaces may also damage your device. Con-
nect only the ETH interface of the device to the LAN interface of the computer/hub or
an ISDN interface of the device, if any, only to the ISDN connection.
Note
If you connect an unconfigured device to an ISDN connection in parallel to a PBX, the
PBX cannot take any calls until an ISDN number is configured on the device. If no
entry is specified, every incoming ISDN call is accepted by the ISDN Login service.
3 Installation Teldat GmbH
6bintec Rxxx2/RTxxx2