Telect ELF-1008-1100 User manual

ELF System
Copper / Fiber :: ELF Family
User Manual
© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
Applys to : ELF-1008-1100 :: ELF-1008-1200 :: ELF-1008-1800 :: ELF-3006-1100 :: ELF-3006-1800
ELF-9704-1119 :: ELF-3004-1800 :: ELF-3206-1200 :: ELF-3206-1900 :: ELF-PC12-SC00
ELF-9716-1900 :: ELF-9716-1700 :: ELF-0005-0001 :: ELF-PC12-FC00 :: ELF-SP12-SCPT
ELF-SP12-FCPT :: ELF-PC12-SA00 :: ELF-SP12-SAPT

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
ii
ELF System
Copper / Fiber :: ELF Family
Table of Contents
Chapter 1: Descriptions ........................................................................................................1
1.1 ELF Copper/Fiber System ..............................................................................................1
1.2 ELF Modules...................................................................................................................1
1.3 ELF Mounting Options ....................................................................................................5
1.3.1 ELF Chassis (Model ELF-0000-2400).....................................................................5
1.3.2 Wall-Mount ELF Chassis Bracket (ELF-0000-0900) ...............................................7
1.3.3 ELF Wall Bracket (Model ELF-0000-0600) ...........................................................10
1.3.4 ELF Lockable Wall-Mount Enclosure (Model ELF-0000-0800)............................. 11
1.4 System-Level Applications............................................................................................13
1.5 Installation Considerations............................................................................................13
1.5.1 Location and Space ..............................................................................................13
1.5.2 Tools and Equipment.............................................................................................13
1.5.3 Inspection..............................................................................................................14
1.5.4 Technical Support (USA).......................................................................................14
1.6 Specications................................................................................................................14
Chapter 2: ELF DS1 Modules.............................................................................................17
2.1 ELF 8-Termination DSX-1, Wire-Wrap I/O (Model ELF-1008-1100).............................17
2.2 ELF 8-Termination DSX-1, BNC I/O (Model 1008-1200) .............................................. 19
2.3 ELF 8-Termination DSX-1, RJ48C I/O (Model ELF-1008-1800)................................... 21
2.4 ELF 6-Termination DSX-1, Wire-Wrap I/O (Model ELF-3006-1100).............................23
2.5 ELF 6-Termination DSX-1, RJ48C I/O (Model ELF-3006-1800)................................... 24
2.6 ELF 4-Circuit DNI-1, Wire-Wrap I/O to RJ48C I/O (Model ELF-9704-1119) .................25
2.7 ELF 4-Circuit DNI-1, RJ48C I/O to RJ48C I/O (Model ELF-3004-1800)....................... 27
Chapter 3: ELF DS3 Modules.............................................................................................29
3.1 ELF 2-Termination DSX-3, Rear BNC I/O (Model ELF-3206-1200) .............................29
3.2 ELF 1-Termination DSX-3, TFA BNC I/O (Model ELF-3206-1900)...............................31
Chapter 4: ELF Fiber Modules............................................................................................33
4.1 ELF Fiber Patch Modules (Model Series ELF-PC12) ...................................................33
4.2 ELF Fiber Splice/Patch Modules (Model Series ELF-SP12) ........................................ 34
Chapter 5: ELF Multi-Purpose Modules..............................................................................37
5.1 ELF RJ45C to RJ45C Patch Module (Model ELF-9716-1900) ..................................... 38
5.2 ELF RJ45-IDC Patch Module (Model ELF-9716-1700) ................................................39
5.3 ELF 12 x 4 Alarm Pin Block Module (Model ELF-0005-0001) ......................................40
Chapter 6: Service ..............................................................................................................41
6.1 Owner Maintenance......................................................................................................41
6.2 Service..........................................................................................................................41
6.2.1 In-Warranty Service ..............................................................................................41
6.2.2 Out-Of-Warranty Service.......................................................................................41
6.3 Repacking For Shipment ..............................................................................................41
Chapter 7: Accessories.......................................................................................................42

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com iii
ELF System
Copper / Fiber :: ELF Family
List of Figures
Figure 1 - ELF Chassis Mounting Options............................................................................6
Figure 2 - Installing ELF Chassis on a Rack......................................................................... 7
Figure 3 - Grounding an ELF Chassis ..................................................................................7
Figure 4 - Bracket .................................................................................................................7
Figure 5 - Wall-Mount ELF Chassis Bracket Dimensions.....................................................8
Figure 6 - Wall-Mount ELF Chassis Bracket Installation.......................................................9
Figure 7 - ELF Wall Bracket Dimensions............................................................................10
Figure 8 - Typical ELF Wall Bracket Installation .................................................................10
Figure 9 - ELF Lockable Wall-Mount Enclosure ................................................................. 11
Figure 10 - ELF Lockable Wall-Mount Dimensions.............................................................12
Figure 11 - Model ELF-1008-1100 Dimensions ..................................................................17
Figure 12 - Model ELF-1008-1100 Reference Schematic ..................................................18
Figure 13 - Model 1008-1200 Dimensions..........................................................................19
Figure 14 - Model 1008-1200 Reference Schematic .......................................................... 20
Figure 15 - Model ELF-1008-1800 Dimensions..................................................................21
Figure 16 - Model ELF-1008-1800 Reference Schematic ..................................................22
Figure 17 - Model ELF-3006-1100 Dimensions ..................................................................23
Figure 18 - Model ELF-3006-1100 Reference Schematic ..................................................23
Figure 19 - Model ELF-3006-1800 Dimensions..................................................................24
Figure 20 - Model ELF-3006-1800 Reference Schematic ..................................................24
Figure 21 - Model ELF-9704-1119 Dimensions ..................................................................25
Figure 22 - Model ELF-9704-1119 Reference Schematic...................................................26
Figure 23 - Model ELF-3004-1800 Dimensions..................................................................27
Figure 24 - Model ELF-3004-1800 Reference Schematic ..................................................27
Figure 25 - Model ELF-3206-1200 Dimensions..................................................................29
Figure 26 - Model ELF-3206-1200 Reference Schematic ..................................................30
Figure 27 - Model ELF-3206-1900 Dimensions..................................................................31
Figure 28 - Model ELF-3206-1900 Reference Schematic ..................................................31
Figure 29 - ELF-PC12-SC00 ..............................................................................................33
Figure 30 - ELF Patch Module (Model ELF-PC12-SCxx, Typical Cabling..........................34
Figure 31 - Model Series ELF-SP12 Parts & Dimensions ..................................................34
Figure 32 - Splice Cassette ................................................................................................ 35
Figure 33 - Subunit Entrance Compartment .......................................................................35
Figure 34 - ELF Splice/Patch Module .................................................................................36
Figure 35 - Model ELF-9716-1900 Parts & Dimensions .....................................................38
Figure 36 - Model ELF-9716-1900 Schematic....................................................................38
Figure 37 - Model ELF-9716-1700 Parts & Dimensions .....................................................39
Figure 38 - Model ELF-9716-1700 Schematic....................................................................39
Figure 39 - Example of Model ELF-9716-1700 nished cable and wiring ..........................40
Figure 40 - Model ELF-0005-0001 Parts & Dimensions .....................................................40

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 1
ELF System
Copper / Fiber :: ELF Family
Chapter 1: Descriptions
1.1 ELF Copper/Fiber System
Telect’s ELF System is a small “edge” connection system for use in locations where equipment density — maximum
density with simplied monitoring — is important. The ELF System is ideal for a 3G, 4G, LTE wireless network at
a base transceiver station (BTS), customer premises, controlled environment vault, co-location, or at any remote
network terminal.
All ELF Systems consists of a chassis, wall brackets, or wall enclosures with DSX-1, DNI, DSX-3,
Fiber, and/or Ethernet/Data modules:
• ELF Chassis t equipment cabinets, 19-in. or 23-in. EIA/WECO racks, or Telect’s Wall-Mount ELF Chassis
Bracket. Each 1RU (1RU = 1.75 in.) chassis handles up to three, rear- and/or front-access ELF modules.
DSX-1, DSX-3, ber, and other ELF modules can be mixed in the same chassis.
• Single-Module ELF Wall Brackets mount to the walls. Each bracket accommodates one total front-access
ELF module
• Single-Module ELF Wall enclosures include a lockable access door. The enclosure mounts to the wall and
accommodates one rear- and/or front-access ELF module. Ideal for a Fiber ELF module.
All chassis, brackets, and enclosures include shield ground pins for ITU G.703 compliance. ELF
modules are passive devices and do not require power. All chassis, enclosure, brackets, and
modules are mainly black.
1.2 ELF Modules
The cover shows a composite of all ELF modules and mounting options.
The following identies all ELF DSX1, DSX3, ber, and signal-manager modules offered by Telect, along with
section and page references. Mounting options (chassis and wall mount) are covered in this section.

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
2
ELF System
Copper / Fiber :: ELF Family
ELF Module Conguration ELF Model
Number
Page Illustration
DSX-1
8-Termination REAR — Wire-Wrap I/O
FRONT — Wire-Wrap XC
• 3-Port Bantam Patch Jacks
ELF-1008-1100 17
REAR — BNC I/O
FRONT — Wire-Wrap XC
• 3-Port Bantam Patch Jacks
ELF-1008-1200 19
REAR — RJ48C I/O
FRONT — Wire-Wrap XC
• 3-Port Bantam Patch Jacks
ELF-1008-1800 21
6-Termination
(See Note.)
TOTAL FRONT ACCESS —
• Wire-Wrap I/O
• Wire-Wrap XC
• 3-Port Bantam Patch Jacks
ELF-3006-1100 23
TOTAL FRONT ACCESS —
• RJ48C I/O
• RJ48C XC
• 3-Port Bantam
Patch Jacks
ELF-3006-1800 24
DNI-1
NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF
Wall Bracket (ELF-000-0600).

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 3
ELF System
Copper / Fiber :: ELF Family
ELF Module Conguration ELF Model
Number
Page Illustration
4-Circuit
Interconnect
REAR —
• Wire-Wrap NE1 I/O
FRONT —
• RJ48C NE2 I/O
• 3-Port Bantam
Patch Jacks for all NEs
ELF-9704-1119 25
TOTAL FRONT
ACCESS(See Note.) —
• RJ48C NE1 I/O
• RJ48C NE2 I/O
• 3-Port Bantam
Patch Jacks for all NEs
ELF-3004-1800 27
DSX-3
2-Termination
1-Termination
(See Note.)
REAR —
• BNC I/O & XC
FRONT —
• 6-Port Mini-WECO
Jacks
ELF-3206-1200 29
TOTAL FRONT AC-
CESS —
• BNC I/O & XC
• 6-Port Mini-WECO
Jacks
ELF-3206-1900 31
Fiber
12-Termination
Patch
REAR —
• Fiber Jumpers from
NEs
FRONT —
• Fiber Adapters
ELF-PC12-SC00
ELF-PC12-FC00
33
NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF
Wall Bracket (ELF-000-0600).

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
4
ELF System
Copper / Fiber :: ELF Family
ELF Module Conguration ELF Model
Number
Page Illustration
12-Termination
Splice/
Patch
REAR —
• Subunit Entrance
FRONT —
• Fiber Adapters
ELF-SP12-SCPT
ELF-SP12-FCPT
34
12-Termination
SC-APC
Patch Module
REAR –
• Fiber Jumpers
from NEs
FRONT –
• Fiber Adapters
ELF-PC12-SA00 33
12-Termination
SC/APC
Patch and
Splice Module
REAR –
• Subunit Entrance
FRONT –
• Fiber Adapters
ELF-SP12-SAPT 33
General Purpose Signal Management
NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF
Wall Bracket (ELF-000-0600).

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 5
ELF System
Copper / Fiber :: ELF Family
ELF Module Conguration ELF Model
Number
Page Illustration
16-Circuit
Patch
REAR —
• 16, RJ45Cs
FRONT —
• 16, RJ45Cs
ELF-9716-1900 38
REAR —
• 16 IDC
Punch-Down Blocks
FRONT —
• 16, RJ45s
ELF-9716-1700 39
12 x 4 Alarm
Pin Block
(See Note.)
Bulkhead-Style Pin
Block
ELF-0005-0001 40
NOTE: All DS1 and DS3 Total Front Access and 12x4 Alarm Pin Block ELF Modules t Telect’s ELF
Wall Bracket (ELF-000-0600).
REAR
FRONT
1.3 ELF Mounting Options
1.3.1 ELF Chassis (Model ELF-0000-2400)
• High-density 1RU chassis accommodates three ELF modules.
• Fully enclosed environment provides robust RF protection.
• Reversible mounting brackets available for 19-in. or 23-in. EIA/WECO racks. (Rack-mounting hardware
included.) Chassis brackets also t Telect’s Wall-Mount ELF Chassis Bracket.
• Total termination capacity per chassis:
− 18 or 24 DSX-1
− 12 DNI
− 3 or 6 DSX-3
− 36 ber splices/patches
− 48 RJ45C-to-RJ45C patches
− 36 alarm interconnects

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
6
ELF System
Copper / Fiber :: ELF Family
3.5 (88.9)
5.00 (127.0)
17.25 (438.2)
1.73 (44.0)
Reversible Rack Brackets
Fit 19-in. or 23-in., EIA- or
WECO-Spaced Racks. Brackets
Tie-Down Bar
Removable Cable
Note: Dimensions are in in. (mm)
FRONT VIEW
REAR VIEW
#8-32 Ground Stud and KEPS Nut
can be Positioned for Panel Flush
or 1-in. Extended Mounting.
Figure 1 - ELF Chassis Mounting Options

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 7
ELF System
Copper / Fiber :: ELF Family
The following illustrations show a typical installation.
Figure 2 - Installing ELF Chassis on a Rack Figure 3 - Grounding an ELF Chassis
1.3.2 Wall-Mount ELF Chassis Bracket (ELF-0000-0900)
Telect’s Wall-Mount ELF Chassis Bracket is designed
to hold one ELF Chassis (ELF-0000-2400) against a
wall or side of a cabinet. The chassis bracket allows
an ELF chassis with either rear- and/or front-access
modules to either extend from a wall or cabinet using
a minimum wall “footprint” or to hug the wall or cabinet
with a minimum prole. Wall-mounting hardware is
not included.
Figure 4 - Bracket

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
8
ELF System
Copper / Fiber :: ELF Family
18.71 (475.2) 16.00 (406.4)
0.75 (19.0)
0.25 (6.35)
5.30
(134.6)
3.30
(83.8)
4.30
(109.2)
8.00
(203.2)
0.50 (12.7)
0.25 (6.35)
8.00 (203.2)
16.00 (406.4)
18.31 (465.1)
19.77 (502.2)
0.875 (22.2)
0.95 (24.1)
2.03 (51.5)
0.50 (12.7)
0.91 (23.0)
1.25
(31.8)
Outline of ELF Chassis
3.00 (76.2)
5.00 (127.0)
Figure 5 - Wall-Mount ELF Chassis Bracket Dimensions
Typical wall installations are shown in the following illustrations. Telect recommends that the tie bar on the rear
of the ELF Chassis be removed when installing in the Wall-Mount ELF Chassis Bracket. Also, when installing
rear access ELF modules, Telect recommends including a minimum 2-ft (600-mm) service loop for any cabling or
wiring intended for the rear of the ELF module(s). Don’t forget to install a ground wire on the ELF Chassis, as
shown on Page 7.

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 9
ELF System
Copper / Fiber :: ELF Family
Rear Tie Bar
ELF Chassis
GND Stud
Removing Tie Bar
Hugging a Wall
Extending from a Wall
Figure 6 - Wall-Mount ELF Chassis Bracket Installation

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
10
ELF System
Copper / Fiber :: ELF Family
1.3.3 ELF Wall Bracket (Model ELF-0000-0600)
Wall-mount bracket for one, total front access ELF module (ELF-3006-1100, ELF-3006-1800, ELF-3004-1800, or
ELF -0005-0001). Wall-mounting hardware is not included.
4.50 (114.3)
0.12
(3.0)
6.00 (152.4)
4.50 (114.3)
1.78
(54.2) 1.00 (25.4)
2.25 (57.2)
4.00 (101.6)
Grounding Hardware Included
#4 Lockwasher
#4 Lug for 16-14 AWG
Note: Dimensions are in in. (mm)
Figure 7 - ELF Wall Bracket Dimensions
The following illustration shows a typical installation.
Figure 8 - Typical ELF Wall Bracket Installation

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 11
ELF System
Copper / Fiber :: ELF Family
1.3.4 ELF Lockable Wall-Mount Enclosure (Model ELF-0000-0800)
Wall-mount enclosure, designed initially for one ber
ELF module, accommodates any rear-and/or
front-access ELF module. Model ELF-000-0800
includes a lockable access door, ideal for co-locations.
Wall-mounting and grounding hardware are not included.
The following illustration shows a typical installation.
Screws are supplied with ELF Module
ELF Module
(Typical)
Mounting screws are not supplied
Ground Strap & Lock Washer
are not supplied
Figure 9 - ELF Lockable Wall-Mount Enclosure

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
12
ELF System
Copper / Fiber :: ELF Family
10 (0.39) Dia.
134
(5.28)
4.6 (.18) Dia.
7.6 (0.3) Dia.
76.2 (3.00)
135 (5.31)
63.5
(2.50)
3.00
(0.12)
Note: Dimensions are in mm (in.)
FRONT VIEW
TOP VIEW
REAR VIEW
(ROTATED)
9.0 (0.35)
4.6 (.18)
9.4 (0.37)
38.1 (1.5)
172.9
(6.81)
236.79 (9.32)
Figure 10 - ELF Lockable Wall-Mount Dimensions

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 13
ELF System
Copper / Fiber :: ELF Family
1.4 System-Level Applications
• Fiber Optic Splice/Patch Modules: Manage modest ber count bundles being delivered to base stations in
high-capacity wireless networks.
• DSX-3 Modules: Deliver advanced services outward to the edge of the network, whether wireless or wireline.
• DSX-1 Modules: Gain industry-leading density and options for T1/E1 signal management at the network’s edge.
• RJ-TJ Patch Module: In remote HUTs, CEVs, and cabinets, takes T1/Ethernet equipment interface from
inaccessible rear connection to front of equipment rack.
• T1 Interconnect RJ45 Modules: Ideal for handoff applications in customer premise environments.
1.5 Installation Considerations
CAUTION
!
CAUTION! Only qualied technicians may install and maintain this product.
ALERT
!
ALERT! These instructions presume you have veried that the Telect equipment being installed is
compatible with the rest of the system, including power, ground, circuit protection, signal characteristics,
equipment from other vendors, and local codes or ordinances.
1.5.1 Location and Space
• The ELF Chassis mounts in a 19 in. or 23 in. equipment rack (EIA or WECO) or inside an equipment cabinet.
On an EIA rack, it takes up one RU of space (1RU = 1.75 in.).
• The Wall-Mount ELF Chassis Bracket requires approximately 20 in. (503 mm) by slightly more than 2 in. (52
mm) if a minimum wall “footprint” is desired. If hugging the wall, reserve approximately 20 in. by 8.25 in. (210
mm) of space.
• The ELF Wall Bracket requires approximately 6 in. (155 mm) by approximately 2 in. (45 mm) or 4 in. (102
mm) of wall space, depending on mounting orientation.
• The ELF Wall-Mount Enclosure requires approximately 10 in. (255 mm) by approximately 7 in. (180 mm) of
wall space.
1.5.2 Tools and Equipment
• common hand tools
• wire-wrap tools for pinelds
• a chassis ground wire—14 AWG minimum with ring terminal
Use listed components (UL-recognized, CSA, ETL, TUV agency) and crimping tools.

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
14
ELF System
Copper / Fiber :: ELF Family
1.5.3 Inspection
Compare the contents of the ELF shipping container(s) with the packing list. Call Telect if you are missing anything.
Telect is not liable for shipping damage.
If the shipping container is damaged, keep it for the carrier’s inspection. Notify the carrier and call
Telect at 1-509-926-6000.
Keep the container until you have checked equipment operation. If you experience any kind of
problem, call Telect’s Customer Service Department. Use the original, undamaged container if
you are instructed to return the ELF equipment to Telect.
1.5.4 Technical Support (USA)
Please read and understand all instructions before starting installation. If you have questions, contact Telect
Technical Support at [email protected] or call 1.509.926.6000.
When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any
defective or missing parts to Telect Quality at [email protected] or call 1.509.926.6000.
Telect is not liable for transit damaged. If the product is damaged, please report it to the carrier and contact
Telect Quality.
1.6 Specications
E1 Specication T1 Specication
Return Loss 12 dB 51 kHz to 102 kHz
18 dB 102 kHz to 2048 kHZ
14 dB 2048 kHz to 3073 kHz
26 dB 772 kHz
Insertion Loss 0.5 dB at bit rate (2.048 Mbps) 0.5 dB at bit rate (1.544 Mbps)
Monitor Level –20 dB ± 1.5 dB at bit rate (2.048
Mbps)
–20 dB ± 1.5 dB at bit rate (1.544
Mbps)
Contact Resistance <0.01 Ohms
Characteristic Impedance 100/120 Ohms
Adjacent Channel Crosstalk -60 dB at bit rate (2.048 Mbps) -60 dB at bit rate (1.544 Mbps)
Interchannel Crosstalk -60 dB at bit rate (2.048 Mbps) -60 dB at bit rate (1.544 Mbps)
Table 1 - DS1 Electrical

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 15
ELF System
Copper / Fiber :: ELF Family
Table 2 - DS3 Electrical
Specication
Return Loss <-26 dB at DS3, STS-1, and E3 signal rates
Insertion Loss <1.00 dB at DS3 signal rates for modules with one monitor network
Monitor Level 21 dB ± 1.5 dB below signal level
Contact Resistance <0.01 Ohms
Characteristic Impedance 75 Ohms
Table 3 - Fiber Optics
Specication
Return Loss >55 dB
Insertion Loss <0.5 dB
Mode Single
Bandpass 1310/1550 ± 20 nm

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
16
ELF System
Copper / Fiber :: ELF Family
This page was intentionally left blank

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com 17
ELF System
Copper / Fiber :: ELF Family
Chapter 2: ELF DS1 Modules
Telect offers ve DSX-1 and two DNI-1 ELF Modules:
• All three ELF DSX-1 8-Termination Modules feature network element RJ45, BNC, or wirewrap connections on
the rear and Telect’s Bantam patch/monitor jacks and wire-wrap crossconnections on the front.
• Both ELF DSX-1 6-Termination Modules are total front access modules. Wire-wrap network element, wire-wrap
cross-connections, and Bantam patch/monitor jacks are all on the front.
• Both ELF DNI-1 4-Circuit Modules contain RJ48C termination on the front along with 4 sets of Bantam
patch/monitor jacks for the NE interconnections. One DNI-1 module is total front access with all Bantam
interconnections between RJ48C NE-1/NE-2 terminations; the other module interconnects four NE-2 RJ48C
termination on the front with wire-wrapped NE-1 termination on the rear.
2.1 ELF 8-Termination DSX-1, Wire-Wrap I/O (Model ELF-1008-1100)
Eight-circuit network element I/O wire-wrap pineld on the rear and corresponding cross-connect pineld and
Bantam-style patch and monitor jacks on the front. Both pinelds provide individual shield grounds for each set of
jacks. Screws for mounting module to an ELF chassis or lockable wall-mount enclosure are included.
Circuit Designation
Label
Jumper
Tie-Down Bar
Cross-Connect Pins
8-Termination Module
DSX-1 Bantam
Jacks
Network Element Pinfield
0.78 (19.9)
5.50
(139.7)
5.11 (129.7)
1.63
(41.3)
0.55
(13.9)
Note: Dimensions are in in. (mm)
Top View
5.86 (148.8)
Figure 11 - Model ELF-1008-1100 Dimensions