Telematrix Spectrum Plus LP550 User manual

36
31
30
2928
27
26
33
35
37
32
34
38
39 40
Base Underside
Features & Controls
26. Data port receptacle
27. Line cord receptacle
28. Headset port receptacles
29. Handset coil cord receptacle
30. Ringer Volume - HI LOW OFF
31. Message Waiting - NEON LED
32. Hold setting - LINE SYSTEM
33. Handset cord channel
34. Model version number
35. Line cord channel
36. Warranty seal
37. Mount bracket lock
38. Mount bracket channel
39. Desk mounted bracket
40. Wall mounted bracket
LP550
User’s Guide
Line Powered Speakerphone
Single Line Caller ID
1.800.462.9446 domestic
+1.719.638.8821 international
www.telematrixusa.com
5025 Galley Road
Colorado Springs
Colorado 80915 USA
1.800.462.9446 domestic
+1.719.638.8821 international
www.telematrixusa.com

STATEMENT OF LIMITED WARRANTY
TELEMATRIX, INC.. warrants to its [original end customer] [purchaser] that Spectrum PLUS, Marquis and
RETRO branded products manufactured by TELEMATRIX, INC. are free from defects in materials and workman-
ship for ve (5) years after the date of purchase, and Regency branded products manufactured by TELEMATRIX,
INC. are free from defects in materials and workmanship for three (3) years, other than the following products for
which the warranty period shall be one (1) year: handset batteries, either NiCd or NiMH, used in TELEMATRIX,
INC. cordless products. If a product fails this warranty during the warranty period, TELEMATRIX, INC. will, at
its option, either repair or replace the defective product or parts, or deliver replacements for defective products
or parts on an exchange basis at no additional charge to the customer except as set forth below. Repair parts
or replacement products may be either new or reconditioned. Products or parts returned to TELEMATRIX, INC.
under this warranty will become the property of TELEMATRIX, INC. Warranties on products repaired by TELE-
MATRIX, INC. expire at the termination of the original warranty period.
This limited warranty does not cover
1. Products or parts which are damaged, abused or misused;
2. Any damage resulting from improper installation, maintenance or operation of the product;
3. Damage resulting from unauthorized modication or repair of the product, or from improper connec-
tion of the product to other equipment;
4. Cords, connectors and replaceable batteries;
5. Damage in transit to the TELEMATRIX, INC. repair facility;
6. Any product or part unless proof of date of purchase is submitted with the product when returned for
warranty repair; or
7. Costs incurred by the customer in removing and shipping the product to TELEMATRIX, INC. for
repair or replacement, and costs of reinstallation of the product.
8. Products or parts which are not owned and used by the original end user customer.
The cost and risk of loss or damage for sending the product to TELEMATRIX, INC. will be borne by the cus-
tomer.
TELEMATRIX, INC. EXPRESSLY DISCLAIMS ALL WARRANTIES EXCEPT THE LIMITED WARRANTY SET
FORTH HEREIN, WHICH IS THE SOLE AND EXCLUSIVE WARRANTY OF THE PRODUCT, AND IS IN LIEU
OF ALL OTHER WARRANTIES, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, OR STATUTORY.
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE. THE CUSTOMER’S SOLE REMEDY UNDER THE TELEMATRIX, INC. WARRANTY SHALL BE REPAIR
OR REPLACEMENT AS PROVIDED ABOVE. IN NO EVENT WILL TELEMATRIX, INC. BE LIABLE TO CUS-
TOMER OR ANY OTHER PARTY FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING, WITHOUT LIMITATION, DAMAGES OF LOST PROFITS, LOST REVENUES, LOSS OF USE OF
FACILITIES OR EQUIPMENT, OR COST OF SUBSTITUTE EQUIPMENT ARISING OUT OF THE USE OR
INABILITY TO USE THIS PRODUCT, EVEN IF THE CUSTOMER HAS ADVISED TELEMATRIX, INC. OF THE
POSSIBILITY OF SUCH DAMAGES. TELEMATRIX, INC. LIABILITY FOR DAMAGES SHALL NOT EXCEED
THE PURCHASE PRICE OF THE DEFECTIVE PRODUCT.
This limited warranty is non-transferable without the prior written approval of TELEMATRIX, INC. It gives the
customer specic legal rights. The customer may have other rights which vary under local law. Some jurisdic-
tions may not allow limitations on the term of an implied warranty or exclusions or limitations of incidental or
consequential damages.
TABLE of CONTENTS:
Features
Features & Controls page 1
Parts List page 2
Compliiance/Safety page 2
Installation
Caution Information page 3
Connecting Cords page 3
Key Caps page 3
Switch Settings (hold, ringer, msg. waiting) page 4
Bracket - Desk or Wall Mounting page 14
Operation
LED Indicators page 5
Placing a Call page 5
Data Port page 5
Hold/Mute & Redial Features page 6
Disconnect & Volume Features page 7
VoiceMail Retrieval & Recording page 7
Headset Features page 8
Programming
All Functions page 9
Date/Time, Language, Voice Mail page 10
Dial Key, Call Waiting ON page 11
Pause & Flash Timing page 12
Live Dial Pad, SDT, All Setup Ok page 13
LCD Display Information & Icons
LCD Display Images page 15
LCD Information pages 16-20
Servicing
Care, Maintenance, Service page 21
Warranty page 22
PARTS CHECK LIST:
The following parts are included in this
package:
A. Line cord - 15 ft.*
B. Handset coiled cord - 10ft.
C. Base unit
D. Handset
E. Twenty two (22) speed dial
preprinted keycaps
F. Four (4) additional clear keycaps
G. Two (2) labeling sheets
H. Wall/Desk Mount Wedge and
short 6 inch line cord.*
* SpectrumPLUS line cords are 4-pin
6-conductor line cords (4P4C line cord).
Replacement line cords must be the
same.
2
21
COMPLIANCE & SAFETY:
As specied by FCC regulation, we are required to inform you of specic governmental and compliance regulatory
requirements, safety notices, safety instructions and other informative information. TeleMatrix, Inc.. provides this
information in a separate manual. We place the separate Compliance and Safety Manual within each outer box or
product box when shipped.
Prior to reading this operation manual and prior to setting up your telephone, please refer to the Compliance and
Safety Manual.
If the Compliance and Safety Manual is not immediately available. Please obtain a free copy by calling our
PriorityCare department (1.800.462.9446) or by downloading a copy on our Internet web site (www.telematrixusa.com).
SpectrumPLUS
LP550
INSTALLATION
& USERS GUIDE
* Version 08.24.07

Installation...
Caution Information
• Never install telephone or network wiring during a lightning storm.
• Never install telephone or Ethernet jacks in wet locations unless the jack is specically
designed for wet locations.
• Never touch uninstalled telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone and network lines.
Connecting the Handset Cord
A 10 ft. modular handset coil cord is provided. To install, simply plug one end of the coil
cord into the jack at the base of the handset, and the other end into the jack located on
the under side of the telephone base marked “Handset”, routing the long end of the cord
through the channel directly below the jack.
Connecting the Line Cord
A 15 ft. modular line cord is provided. To install, simply plug one end of the cord into the
modular jack on the underside of the base unit, route the line through the channel directly
below the jack, and the other end into the wall jack.
320
Installing Key Caps
Twenty two pre-labeled feature keycaps are provided.
There are eleven clear keycaps already installed. To install pre-printed keys, remove the
clear caps by pulling up. Replace with pre-printed caps or place user printed paper index
labels under a clear keycap. Program each speed dial key for the specic function of the
key. (See Programming page 9-16 for instructions)
Labeled Key Caps
The twenty two silkscreened keycap names are below:
Call Fwd On Call Back Paging Paging Skip Msg Information
Call Fwd Off Cancel Call Back Ring Again FF Msg 911
Transfer Call Park Save Msg Rew Msg Conf
Emergency Call Pick-up Del Msg DND Help Desk
Rpt Mag Group Call Pick-up
Call Record Editing Prior to Dialing
To Add Characters to the Displayed Number
1. Press the “↑” or “↓” key to activate the display for scrolling.
2. Scroll to the number you wish to dial.
3. Activate the editing feature by pressing any number on the keypad. (note that the key
pressed will be displayed on the LCD).
4. Press the keypad number you require and it will appear on the LCD prior to the
number on the display.
5. To dial, lift handset or activate the “SPEAKER” key or press “DIAL” key to dial number
automatically. When pressing the “DIAL” key, the “SPEAKER” will activate.
Note: The number can only be inserted prior to the displayed digits.
To Delete Characters to the Displayed Number
1. Press the “↑” or “↓” key to activate the display for scrolling.
2. Scroll to the number you wish to dial.
3. Activate the editing feature by pressing any number on the keypad. (note that the key
pressed will be displayed on the LCD).
4. Press the “DELETE” key to delete invidual characters.
5. To dial, lift handset or activate the “SPEAKER” key or press “DIAL” key to dial number
automatically. When pressing the “DIAL” key, the “SPEAKER” will activate.
Note: When deleting characters from a caller’s identity, the Call Log will not be changed.
“Invalid Entry” Displayed - #
Indicates that the entry is not recognized or is outside the parameter of the range for that
specic function. LCD display the “INVALID ENTRY”.

19 4
System Hold Feature (option switch) - # 32
A feature switch for different hold fuctions is located on the bottom of the phone. The
switch options are standard “Line Hold” or programmable “System Hold”.
The standard “Line Hold” allows for normal hold function operation. Programmable
“System Hold” feature is used for optional PBX system operations.
The switch default is set at the factory as standard “Line Hold”.
Note: To program System Hold is an Administrator function. To program System Hold,
follow the speed dial instructions in this manual. To store the dialing pattern, press the
HOLD key in place of the memory location.
Settings...
Ringer Volume Switch - # 30
The ring volume switch can be set at High, Low or Off position.
Line Cord Powered
The SpectrumPLUS LP Series do not require external power. It uses line power from the
telephone company. Simply plug in the line cord from the wall jack to the underside of
the telephone and you are powered up.
To check if the installation was correct, the information shown on LCD in Idle Mode,
Calls and Records will show no call (00). If this is not displayed, please check your
line cord connections.
Message Waiting Selector - # 31
This telephone can support 90VDC “Neon” or low-voltage “LED” message waiting
systems. Simply slide the switch to the desired position that is compatible with your
PBX message system.
Note: the phone is factory preset to the “Neon” setting
Deleting a Call Log Record
Deleting an individual stored Call Record
Press “↑” or “↓” key to activate stored memory. The LCD screen will display a record.
Scroll to the record you wish to delete.
Press the “DELETE” key once and the LCD screen will display the question “DELETE?”
Press the “DELETE” key a second time to delete record.
Deleting All stored Call Records
Press “↑” or “↓” key to activate stored memory. croll to the rst record in memory.
Press and hold the “DELETE” key for 6 seconds. The LCD will display the question
“DELETE ALL?”
To delete all stored calls, release and press the “DELETE” key again to delete all records.
Note: Any record that is deleted cannot be retrieved. To escape from deleting any record,
press “DISC” key at any time prior to acceptance of the “DELETE?” question.

Indicators...
5 18
Speaker Line Indicators - # 17
When the “SPEAKER” key is activated, the in-use light illuminates steadily RED above the
“SPEAKER” key. The LCD will display “SPEAKER” when active.
Hold Key Indicators - # 22
When the “HOLD” key is activated, the in-use light illuminates steadily RED above the
“Hold” key. The LCD will display “HOLD” when active.
Headset Key Indicators - # 18
When the “HEADSET ON/OFF” key is activated, the in-use light illuminates steadily RED.
The LCD will display “HEADSET” when active.
Placing a Call...
Using the Handset - # 1
• Lift the handset
• Dial out by using the numeric dial pad or selecting a number in memory.
Using the Speakerphone- # 17 & 23
The SpectrumPLUS is equipped with a high quality speakerphone feature to allow for
hands-free operation.
• To use, simply press the “SPEAKER” key when placing or answering a call.
The telephone line will activate automatically.
• When the “DIALPAD” feaure is programmed to be ON, the speakerphone will activate
automatically when pressing the number on the dial pad keys.
• The LCD above the “SPEAKER” key will illuminate to indicate that the speakerphone
is in-use.
• To hang up the handset, pick up the handset from the cradle and the handset will
activate. The speakerphone will disconnect. To re-activate the “SPEAKER” key, press
the “SPEAKER” key and place the handset back into the cradle.
Note: Contact your PBX provider to see what services they offer to recognize private party
calls or anonymous calls that elect to NOT forward their phone number.
Note: The DIAL key will dial any number that is displayed on the LCD screen. If a number is
not displayed on the screen, then there is no number in memory.
Note: Be sure to enter the area code in AREA CODE set up. The area code entered allows
the phone to recognize and eliminate your local area code when dialing out.
LCD Scrolling & Call Back Feature
The “DIAL” key allows the user to call back either stored records or the displayed number
on the LCD. A displayed number on the LCD comes from incoming calls, or from the
Phonebook memory. The Dial Back editing feature allows the user to add or delete
characters to accurately pattern the number to be called. To activate the editing feature,
press any character on the keypad to activate after the record is found.
Scrolling for Stored Records
Pressing the “↑” or “↓” scrolling keys allows the user to review all calls in the Caller ID
records. When scrolling crosses from the most current record to rst record, or from the
rst record to most current record stored in memory, the LCD will display “END OF LIST”
indicating the rollover. Location number and time and date will also change to the date of
the call record displayed.
LCD In-Coming Call Waiting
When there is an active call, and another call is received, and the system is capable of Call
Waiting, the Caller ID information for the Incoming Call will be displayed on the screen. The
display will show the following information
• The date and time of the incoming call, the symbol icon will appear.
• The location number of the call in storage, and the incoming call number.
• The incoming caller’s name.
The user has the option to answer the call or allow the call to be forwarded automatically
to the User’s Voice Mail. When the CW call goes to voice mail, the information can be
retrieved at a later time using the call log.

617
Using the Data Port - # 26
The data port is located on the underside of the base unit. This modular receptacle is
used to plug in any standard telephone device, such as a PC, laptop, answering machine
or fax machine.
Using the Hold Feature - # 22
The “HOLD” key is used to place a caller on hold.
• To use, simply press the “HOLD” key. The LED above the HOLD key will illuminate to
indicate that the line is on hold. The LCD will display the word “HOLD” when active.
• When Line Hold is on “HOLD”, the handset can be returned to its on-hook
position and the line will not be disconnected. To return to the caller, simply lift the
handset or press the “SPEAKER” key.
• When System Hold is on “HOLD”, the call will be disconnected if you hang up the handset.
• Hold will also release when the call is picked up from an extension phone.
Using the Mute Feature - # 16
The “MUTE” key is provided to allow privacy during a background conversation.
• When the “MUTE” key is activated, the microphones in the handset, speakerphone and/or
headset are disabled. When the “MUTE” key is activated, the caller will not hear voice.
• “MUTE” will be displayed on the LCD to show that the feature is active.
• To de-activate, press the “MUTE” key again.
Using the Redial Feature - # 14
The “REDIAL” key is used to automatically redial the last number that was dialed from
the key pad. To use:
• Lift the handset (or activate the speaker.
• Press the “REDIAL” key and the last number dialed will dial.
• Or, with the handset on-hook, simply press the “REDIAL” key and the last number dialed
will redial, automatically activating the speaker.
Note: When redialing the last incoming call, the display will not show the number
being dialed.
LCD Feature Icons - #
NEW (upper left) Indicates New Call
Speaker Icon (upper left) Indicates Speaker in ON
00000 (upper center) Shows current date or date of call record in memory
AM/PM 00:00 (Upper right) Shows current time or time of call record in memory
Envelope Icon (upper right) Indicates Message is Waiting in Voice Mail
Phone Icon (upper right) Indicates Handset is In-Use
CW (upper right) Indicates Caller is Waiting On-Line
00:00 (lower right) Shows elapsed time of current call (begins at 1st ring)
Text (lower left) Shows Message ie. Name of Caller, In-Use...
Display Adjustments
LCD Positioning
The LCD can be tilted upward for direct viewing and easy reading. Tilt it to you desired
position by lifting up the back of the LCD housing. Maximum upward tilt is 60 degrees.
LCD Contrast - # 20
The LP550’s LCD has a 4-step contrast adjustment. However, the LP550’s background is
not illuminated, as line power does not allow for this feature to be activated.

7 16
Using the Disconnect Feature - # 10
The “DISC” key can be used to automatically hang-up the call that you are currently on and
regain a new dial tone to establish a new call.
To use:
• Press the “DISC” key when the conversation is completed.
• The “DISC” key can be used in speaker, headset or handset mode.
Using the Volume Control - # 21
The SpectrumPLUS is equipped with an ADA compliant volume control located on the face
of the phone.
To use:
• When the right end of the “VOLUME” key is pressed, the volume will increase.
• When the left end of the “VOLUME” key is pressed, the volume will decrease.
• The “VOLUME” key is an eight-step volume control.
Note: When the handset, speaker, or headset volume feature is selected, the volume will
automatically stay at that setting in the next use.
LCD Technology
The SpectrumPLUS LCD (Liquid Crystal Display) supports Type II Caller ID. This type
of Caller ID displays the identity of the second incoming call while the user is actively
on the rst incoming call. The user has the option to answer the call or allow the call to
automatically be forwarded to voice mail.
Caller ID feature will not work unless you are a subsriber of that feature with your local
telephone company. To check on whether you have Caller ID service, contact your
telephone provider or your PBX service company.
Display information Management Keys
The SpectrumPLUS is equipped with management keys to support the information
displayed on the Liquid Crystal Display (LCD)
Caller ID Log Record Management
Entering of Names and Numbers
Editing of Names and Numbers
Scrolling and One-Touch Dialing Capabilities
LCD Display...
Using Voicemail to Retrieve and Record Messages - # 9
To listen to Voicemail over the speakerphone:
• Press the “Voicemail” button
To listen to VoiceMail over handset:
• Lift the handset
• Then press “VoiceMail” button
To record or update the outgoing voicemail message:
• Lift the handset
• Then press “VoiceMail” button
• Then follow the audio prompts
TIPS: • Speakerphone is automatically Muted when VoiceMail button is pressed.
• If you need to talk during Voicemail call, press “MUTE” button once to cancel muting.
• If telephone is already off-hook when “VoiceMail” button is pressed, no muting occures.
• Outgoing voicemail messages sound best when the handset is used to record them.
• If privacy/security is required, do not program the voicemail PIN into the telephone.
Instead, enter it manually during each voicemail call.

Headset Feature - # 28
• The SpectrumPLUS Series is equipped with a separate port for plugging in an optional
headset. The port is located on the underside of the base unit.
• To install, simply plug headset cord into HEADSET jack or plug - # 28
• The TeleMatrix FreeSpeech Talk Feature is a unique TeleMatrix feature that allows
the user the freedom to “toggle” between the headset, handset and speakerphone
modes during a conversation.
• To answer incoming call, press the “HEADSET ON/OFF” key to activate the headset.
The LED above the “HEADSET ON/OFF” key will illuminate when in the ON position.
To disconnect press “HEADSET ON/OFF” key again, LED light will go off.
• When the “HEADSET ON/OFF” key is ON, pressing the “SPEAKER” key will activate
the speaker and disconnect the headset line automatically. This feature avoids
having to use the hook switch/handset to process telephone calls while in heads
mode.
• TeleMatrix does not supply headsets, they may be purchased from a TeleMatrix
distributor. Many varieties of headset models are available.
• SpectrumPLUS telephones are unique in that they have a Built-in Headset Amplier.
External ampliers are NOT recommended.
Headset...
15 8
Idle Mode: date time
new calls total calls
Contrast: date time
contrast level
In Coming: date time
# of incoming calls number calling
name of caller
Calling Out: date time handset icon
number calling
line in use counter clock
New Call: date time
# of incoming calls number calling
name of caller
In-Coming Call Waiting: CW call
new caller speaker date time waiting
call log record number calling
name of caller
Speaker Mode: date time
speaker counter clock
Headset Mode: date time
headset counter clock
Deleting 1 Call: date time
call log record number
deleting single call log question
Deleting All Calls: date time
(hold key down for 6 seconds)
delete all call logs
Invalid Call: date time
invalid entry (try again)

Programming - Spectrum PLUS LP550
Steps 1. - 5. MONTH, DAY, MINUTE, AM-PM
Press STORE key to initiate Programming sequence.
As you get to each screen - enter digits either by the dial pad or by
using the volume rocker key to increase or decrease values. Then
press STORE to save data and advance to next menu.
Step 6. LANGUAGE SELECTION
Select preferred language by following prompt on LCD screen.
1 = English 2 = French 3 = Spanish
Steps 7. - 10. VOICE MAIL PROGRAMMING
Once these are programmed you will be able to listen to your
voice mail messages with a Single Press of the Voice Mail key.
• VOICE MAIL NO - enter your access numbers to get voice mail.
• VM PIN - ‘Personal Identication Number’ can be programmed into
the phone memory when Voice Mail is activated. PIN can also be left
blank if your system does not require them.
• VM PIN WAIT TIME- ranges from 0 to 15 sec., we recommend 3
seconds.
• 1-TOUCH VM - should normally be set on ON, if on OFF the phone
must be off-hook before Voice Mail key can be used.
Note!
There is a ‘short-cut’ for accessing the Voice Mail menu: With phone
on-hook, press and release ‘Store’, then press ‘Voice Mail’. This
jumps straight to VOICE MAIL NO without having to step through all
the previous menu items rst.
Steps in Programming All Functions:
a. The phone must be hung up (on hook) to begin programming.
b. Press the STORE key to enter the programming mode.
c. Continue to press STORE key until you arrive at the function
you wish to program. (i.e. Press STORE 6 times if you wish to
change the display language)
d. While the desired item is being displayed, use the digit keys to
change or enter new data.
e. Then press STORE key to save in memory.
f. Press DISC key or continue to press STORE until you get to
ALL SETUP OK to exit programming mode. Pressing DISC
before STORE key will result in losing that menu’s programming.
g. If no key is pressed for 60 sec. or the phone rings while
programming the phone will automatically exit programming mode.
PROGRAMMING
STEPS:
Press STORE Key
MENU DISPLAYS:
1. MONTH: 01
2. DAY: 01
3. HOUR: 12AM
4. MINUTE: 00
5. AM=1 PM=2
6. -1- -2- -3-
ENG FRA ESP
7. VOICE MAIL NO.
8. VM PIN
9. VM PIN WAIT TIME
10. 1-TOUCH VM OFF
11. OUTSIDE LINE PRE
12. LONG DISTANCE
PREFIX
13. AREA CODE 1
14. AREA CODE 2
15. CALL WAIT ON
16. PAUSE TIME 3.6S
17. FLASH TIME
18. LIVE DIAL PAD OFF
19. SDT ON
20. ALL SETUP OK
18
2
149
Programming...
LP550
Line Powered Caller ID Speakerphone
Steps in programming All functions:
a. The phone must be hung up (on hook) to
begin programming.
b. Press the STORE key to enter the
programming mode.
c. Continue to press STORE key until you arrive
at the function you wish to program.
(ie. Press STORE 6 times if you wish to
change the display language)
d. While desired item is being displayed, use the
digit keys to change or enter new data.
e. Then press STORE to save in memory.
f. Press Disc key or continue to press STORE
until you get to ALL SETUP OK to exit
programming mode. Press DISC before
STORE key will result in losing that menu’s
programming.
g. If no key is pressed for 60 seconds or the
phone rings while programming, the phone
will automatically exit programming mode.
Bracket - Wall Mounting / Desk Mounting...
The SpectrumPLUS Series telephone bracket is designed to conveniently slide
into place for wall or desk installation.
Wall Installation:
1. Slide the handset clip # 3 out and then rotate the handset clip 180 degrees returning
to its original location. The slot in the handset will hook into it when hanging.
2. Turn base over so you are now looking at the underside of the phone.
3. Place bracket with wide end toward the bottom of the base # 40.
4. Slide bracket into slots provided, push up to secure into bracket channel # 38.
5. Attach 6 inch line cord to phone recepticle then into wall outlet.
6. Place phone bracket onto wall bracket and slide down until secure.
Desk Installation:
1. Turn base over so you are now looking at the underside of the phone.
3. Place bracket with wide end toward the top of the base # 39.
4. Slide bracket into slots provided, push up to secure into bracket channel # 38.
5. Slide locking tab to the right # 37.
Bracket - Desk Mounted Bracket - Wall Mounted

1013

1211
To Delete the Access Code: Once LCD display reads VM PIN - press
DELETE - then press STORE key again to continue.

123
21 20 18
8
754
17
16
15
14
13
12
11
10
22
6
9
19
23
2425
LP550 Features:
• Line Powered - Single Line Telephone
• SteelTrap™ Memory Technology (no batteries required)
• FreeSpeech™ Talk Feature: Allows Free Toggle between Handset,
Headset and Speakerphone modes.
• Programming Options: Dialing access number, Local area code
recognition, Manual date & time, Multiple language options, Live
keypad dialing option, Programmable Pause timing, Programmable
Flash timing, Voice Mail access, Voice Mail Password dialing, and
Speed Dial programming.
• Large adjustable LCD display shows:
100 scrolling Caller ID call records
Programmable date & time
Name & number
Number of messages, new and total
Dialing verication (except redial)
Elapsed call timer & Functional icons
• Type II Caller ID (Caller ID on Call Waiting).
• 100 Name and Number Call log with editing, scrolling, call back
and delete.
• TouchLite™ one-touch message retrieval key. # 9
• Disconnect key to end current call & begin a new call. # 10
• Eleven (11) programmable speed dial locations. # 11
• Programmable Store key. # 12
(used to program features and speed dial keys)
• Programmable Pause key. # 13
(used to program delay in speed dial keys)
• Redial key (redial last number called) # 14
• Programmable Flash key. # 15
(provides a 100mS to 1000mS timed line break)
• Microphone Mute key. # 16
• Speaker and Headset soft keys. # 17 & 18
• LCD screen contrast with 4 step control. # 20
• ADA compliant handset with 8-step volume control # 21 & 25
• Electronic Hold with LED indication. # 22
(optional standard Line or programmable System hold) # 32
• 2-Way Speakerphone (half duplex) # 23
• Convenient Data port. # 26
• Ringer volume settings HI, LOW, OFF. # 30
• Message waiting in settings NEON or LED # 31
(autodetect for SDT and FSK)
Base Features and Controls:
1. Handset 4. Scroll LCD up 7. Delete key
2. Name plate 5. Scroll LCD down 8. Dial key
3. Wall mount handset clip 6. LCD screen (not backlit) 9. 1-Touch voice mail button
10. Disconnect key 16. Mute key 22. Hold key
11. 11 Speed Dial keys 17. Speaker key 23. Speaker
12. Store key 18. Headset ON/OFF key 24. Phone # faceplate
13. Pause key 19. Dial pad 25. Handset cord receptacle
14. Last # Redial key 20. LCD contrast bar 4-step
15. Flash key 21. Volume control bar 8-step
SERVICE
When problems arise during installation or service that cannot be resolved using this
or related documents, contact the TeleMatrix Technical Service department 8:30 a.m. -
4:30 p.m. MST: USA.
Toll Free: 1.800.462.9446
Direct: 719.638.8821
Fax: [phone]
Many times a problem can be resolved by contacting a TeleMatrix support agent. Please
contact TeleMatrix PRIOR to sending a telephone to our service center for repair.
In the unlikely event that a factory repair is necessary:
1. Include a brief description of the trouble that you are experiencing.
2. Include a proof of purchase for a repair warranty.
3. Send the telephone prepaid by UPS or Parcel Post insured to:
TeleMatrix, Inc.
Customer Care Center
5025 Galley Road
Colorado Springs, CO 80915 USA
TeleMatrix will pay to return the repaired telephone to you.
Please feel free to check on its progress by calling PriorityCare 1.800.462.9446.
CARE AND MAINTENANCE
• Keep the telephone dry. If it gets wet, wipe it dry immediately. Liquids might
contain minerals that can corrode the electronic circuits.
• Use and store the telephone in a normal temperature environment. Temperature
extremes can shorten the life of electronic devices and distort or melt parts.
• Keep the telephone away from excessive dust and dirt that can cause
premature wear of parts.
• Wipe the telephone with a damp cloth occasionally to keep it looking new.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the system.