Telstra WI-FI 4GX ADVANCED III Manual

Telstra 4GX AirCard –Initial Setup Guide
-Insert SIM into Telstra
-Open My Computer and open
(D:) CD Drive –Telstra 4GX USB
-Select Autorun.exe
-This should open up the
following webpage in IE
http://m.home/html/home.ht
ml

Telstra 4GX AirCard –Initial Setup Guide v.1.0
Author: Benson Lam
Date: 15 December 2015
Page 2of 5
-Login using both username and
password:
admin
-You will be informed that the
strength of the password is too
low and to change this.
-Select “Later”
-Enter in SIM PIN
-Untick Disable the PIN
-Select [Apply]
-If Set Network Location
window appears.
-Select Work network

Telstra 4GX AirCard –Initial Setup Guide v.1.0
Author: Benson Lam
Date: 15 December 2015
Page 3of 5
-Select Close
-Return back to IE web browser
-Select Connection Settings
-You will be taken to Settings
screen
-Select Profile Management
-Click on New Profile

Telstra 4GX AirCard –Initial Setup Guide v.1.0
Author: Benson Lam
Date: 15 December 2015
Page 4of 5
-Fill in the following details:
-Profile name: SFNET
-Username: <govnet
username>@sfnet.nsw.gov.au
e.g. [email protected].gov.au
-Password: your govnet logon
password
-APN: sfnet.nsw.gov.au
-Click Save
-The new profile should now be
displayed as SFNET (default)
-click on Apply
-select Home in the top left
menu

Telstra 4GX AirCard –Initial Setup Guide v.1.0
Author: Benson Lam
Date: 15 December 2015
Page 5of 5
-the status should now have
changed to “Connected”
-you are now connected to the
Telstra AirCard under your
domain credentials