Teltonika FMB010 User manual

FMB010 User Manual
V0.10

2
Table of contents
1INTRODUCTION ..................................................................................................................... 6
1.1 ATTENTION............................................................................................................................ 6
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 6
1.3 LEGAL NOTICE........................................................................................................................ 7
1.4 ABOUT DOCUMENT ................................................................................................................. 7
2BASIC DESCRIPTION ............................................................................................................... 7
2.1 BASIC CHARACTERISTICS ........................................................................................................... 8
2.2 TECHNICAL FEATURES............................................................................................................... 9
2.3 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 10
2.4 ELECTRICAL CHARACTERISTICS.................................................................................................. 11
2.5 ABSOLUTE MAXIMUM RATINGS............................................................................................... 11
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 12
3.1 HOW TO INSERT MICRO SIM CARD INTO FMB010 DEVICE:........................................................... 12
3.2 INSTALLING FMB010 DRIVERS ................................................................................................ 14
3.3 OBD II ............................................................................................................................... 16
3.4 NAVIGATE LED..................................................................................................................... 17
3.5 STATUS LED ........................................................................................................................ 17
4OPERATIONAL BASICS.......................................................................................................... 17
4.1 OPERATIONAL PRINCIPALS....................................................................................................... 17
4.2 SLEEP MODE ........................................................................................................................ 17
4.2.1 Sleep mode ............................................................................................................. 17
4.2.2 Deep Sleep mode .................................................................................................... 18
4.2.3 Online Sleep mode.................................................................................................. 18
4.3 VIRTUAL ODOMETER.............................................................................................................. 18
4.4 FEATURES............................................................................................................................ 19
4.4.1 Green Driving/Eco Driving Scenario........................................................................ 19
4.4.2 Over Speeding Scenario. ......................................................................................... 20
4.4.3 Jamming detection ................................................................................................. 20
4.4.4 Trip.......................................................................................................................... 20
4.5 ACCELEROMETER SCENARIOS................................................................................................... 20
4.5.1 Towing Detection.................................................................................................... 20
4.5.2 Unplug Detection.................................................................................................... 20
4.5.3 Crash Detection ...................................................................................................... 20
4.5.3.1 Crash Trace operation................................................................................................... 21
5CONFIGURATION ................................................................................................................. 21
5.1 CONFIGURATOR.................................................................................................................... 21
5.1.1 System settings....................................................................................................... 22
5.1.2 Records settings...................................................................................................... 25
5.1.3 GSM settings, GPRS part ........................................................................................ 26
5.1.4 GSM settings, SMS part .......................................................................................... 27
5.1.5 SMS Event Time Zones............................................................................................ 28
5.1.6 SMS events ............................................................................................................. 28
5.1.7 GSM settings, Operator list .................................................................................... 30
5.1.8 Features settings .................................................................................................... 31
5.1.9 Trip settings ............................................................................................................ 34
5.1.10 AutoGeofencing settings ........................................................................................ 35
5.1.11 GPS Fuel Counter .................................................................................................... 37
5.1.12 Scenarios Accelerometer ........................................................................................ 38
5.1.13 Bluetooth ................................................................................................................ 41
5.1.13.1 How to connect Bluetooth Hands Free adapter to FMB device...................................... 42
5.1.13.2 Device’s log using your mobile phone........................................................................... 44
5.1.13.3 How to connect OBD II Bluetooth Dongle to FMB device .............................................. 47

3
5.1.14 Data Acquisition Mode settings.............................................................................. 50
5.1.15 Connecting to device via Bluetooth ........................................................................ 54
5.2 I/O SETTINGS ....................................................................................................................... 54
6SMS COMMAND LIST ........................................................................................................... 55
6.1 SMS COMMAND LIST............................................................................................................. 55
6.1.1 getinfo .................................................................................................................... 56
6.1.2 getver ..................................................................................................................... 56
6.1.3 getstatus................................................................................................................. 57
6.1.4 getgps..................................................................................................................... 57
6.1.5 ggps ........................................................................................................................ 57
6.1.6 readio #................................................................................................................... 58
6.1.7 getparam................................................................................................................ 58
6.1.8 setparam ................................................................................................................ 58
6.1.9 flush #,#,#,#,#,#,# ................................................................................................... 58
6.1.10 setdigout................................................................................................................. 59
6.1.11 countrecs ................................................................................................................ 59
6.1.12 towingreact ............................................................................................................ 59
6.1.13 faultcodes ............................................................................................................... 59
6.1.14 obdinfo ................................................................................................................... 59
6.1.15 btgetlist .................................................................................................................. 59
6.2 SYSTEM PARAMETERS ............................................................................................................ 60
6.2.1 Sleep Mode (ID=102) .............................................................................................. 60
6.2.2 Sleep timeout (ID=103) ........................................................................................... 60
6.2.3 Movement Source (ID=100).................................................................................... 60
6.2.4 Static Navigation (ID=106) ..................................................................................... 60
6.2.5 Saving/Sending without time synchronization (ID=107) ........................................ 61
6.2.6 GNSS Source (ID=109)............................................................................................. 61
6.2.7 Ignition settings (ID=101) ....................................................................................... 61
6.2.8 High voltage level (ID=104) .................................................................................... 61
6.2.9 Low voltage level (ID=105) ..................................................................................... 61
6.2.10 Led indication (ID=108)........................................................................................... 62
6.3 RECORDS PARAMETERS .......................................................................................................... 62
6.3.1 Sorting (ID=1002) ................................................................................................... 62
6.3.2 Open Link Timeout (ID=1000) ................................................................................. 62
6.3.3 Server Response Timeout (ID=1001)....................................................................... 62
6.4 GSM PARAMETERS ............................................................................................................... 63
6.4.1 GPRS content activation (ID=2000)....................................................................... 63
6.4.2 APN Name (ID=2001)............................................................................................ 63
6.4.3 APN username (ID=2002) ..................................................................................... 63
6.4.4 APN Password (ID=2003) ...................................................................................... 63
6.4.5 Domain (ID=2004) .................................................................................................. 63
6.4.6 Target Server Port (ID=2005).................................................................................. 64
6.4.7 Protocol (ID=2006)................................................................................................ 64
6.5 SMS/CALL SETTINGS ............................................................................................................. 64
6.5.1 SMS data sending settings (ID=3000)..................................................................... 64
6.5.2 Data send number (ID=3001) ................................................................................. 64
6.5.3 Authorized phone numbers (ID=4000-4009) .......................................................... 64
6.5.4 SMS Event Predefined Numbers (ID=6000-6009) ................................................... 65
6.5.5 SMS Login (ID=3003) .............................................................................................. 65
6.5.6 SMS Password (ID=3004)........................................................................................ 65
6.5.7 Incoming call action (ID=3005)............................................................................... 65
6.5.8 Outgoing Call Trigger (ID=3007)............................................................................. 65
6.5.9 GSM number index (ID=3008) ................................................................................ 65
6.5.10 Operator List (ID=5000-5049)................................................................................. 66
6.6 DATA ACQUISITION MODES PARAMETERS.................................................................................. 66
6.6.1 Home Network GSM operator code “Vehicle on STOP” parameters ...................... 66
6.6.1.1 Min Period (ID=10000).................................................................................................. 66

4
6.6.1.2 Min Saved Records (ID=10004) ..................................................................................... 66
6.6.1.3 Send Period (ID=10005) ................................................................................................ 66
6.6.2 Home Network GSM operator code “Vehicle MOVING” parameters ..................... 66
6.6.2.1 Min Period (ID=10050).................................................................................................. 66
6.6.2.2 Min Distance (ID=10051) .............................................................................................. 67
6.6.2.3 Min Angle (ID=10052) ................................................................................................... 67
6.6.2.4 Min Speed delta (ID=10053).......................................................................................... 67
6.6.2.5 Min Saved Records (ID=10054) ..................................................................................... 67
6.6.2.6 Send Period (ID=10055) ................................................................................................ 67
6.6.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 68
6.6.3.1 Min Period (ID=10100).................................................................................................. 68
6.6.3.2 Min Saved Records (ID=10104) ..................................................................................... 68
6.6.3.3 Send Period (ID=10105) ................................................................................................ 68
6.6.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 68
6.6.4.1 Min Period (ID=10150).................................................................................................. 68
Min Distance (ID=10151).............................................................................................................. 68
6.6.4.2 Min Distance (ID=10151) .............................................................................................. 69
Min Period (ID=10150) ................................................................................................................. 69
6.6.4.3 Min Angle (ID=10152) ................................................................................................... 69
6.6.4.4 Min Speed (ID=10153) .................................................................................................. 69
Min Period (ID=10150) ................................................................................................................. 69
Min Distance (ID=10151).............................................................................................................. 69
6.6.4.5 Min Saved Records (ID=10154) ..................................................................................... 70
6.6.4.6 Send Period (ID=10155) ................................................................................................ 70
6.6.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 70
6.6.5.1 Min Period (ID=10200).................................................................................................. 70
6.6.5.2 Min Saved Records (ID=10204) ..................................................................................... 70
6.6.5.3 Send Period (ID=10205) ................................................................................................ 70
6.6.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 70
6.6.6.1 Min Period (ID=10250).................................................................................................. 70
6.6.6.2 Min Distance (ID=10251) .............................................................................................. 71
Min Period (ID=10150) ................................................................................................................. 71
6.6.6.3 Min Angle (ID=10252) ................................................................................................... 71
6.6.6.4 Min Speed (ID=10253) .................................................................................................. 71
Min Distance (ID=10151).............................................................................................................. 71
6.6.6.5 Min Saved Records (ID=10254) ..................................................................................... 72
6.6.6.6 Send Period (ID=10255) ................................................................................................ 72
6.7 FEATURES PARAMETERS ......................................................................................................... 72
6.7.1 Green driving priority (ID=11000)........................................................................... 72
6.7.2 Max Acceleration Force (ID=11004) ....................................................................... 72
6.7.3 Max Braking Force (ID=11005)............................................................................... 72
6.7.4 Max Cornering (ID=11006) ..................................................................................... 72
6.7.5 Green/Eco driving (ID=11007) ................................................................................ 73
6.7.6 Green driving digital output control settings (ID=11003)....................................... 73
6.7.7 Green driving Digital output on duration (ID=11001) ............................................ 73
6.7.8 Green driving Digital output off duration (ID=11002) ............................................ 73
6.7.9 Overspeeding priority (ID=11100) .......................................................................... 73
6.7.10 Max allowed Speed (ID=11104).............................................................................. 73
6.7.11 Overspeeding output control (ID=11103) ............................................................... 74
6.7.12 Overspeeding Digital output on duration (ID=11101) ............................................ 74
6.7.13 Overspeeding Digital output off duration (ID=11102)............................................ 74
6.7.14 Excessive idling priority (ID=11200)........................................................................ 74
6.7.15 Eventual records (ID=11203) .................................................................................. 74
6.7.16 Excessive idling minimum stop duration (ID=11205).............................................. 74
6.7.17 Excessive idling minimum move duration (ID=11206)............................................ 75
6.7.18 Excessive idling output control (ID=11204) ............................................................ 75
6.7.19 Excessive idling output on duration (ID=11201) ..................................................... 75
6.7.20 Excessive idling output off duration (ID=11202)..................................................... 75
6.7.21 Jamming (ID=11300) .............................................................................................. 75
6.7.22 Jamming Eventual records (ID=11303)................................................................... 75
6.7.23 Jamming Output Control (ID=11304) ..................................................................... 76

5
6.7.24 Jamming DOUT on duration [ms] (ID=11301) ........................................................ 76
6.7.25 Jamming DOUT off duration [ms] (ID=11302) ........................................................ 76
6.7.26 DOUT control via call (ID=12000) ........................................................................... 76
6.7.27 DOUT deactivation settings (ID=12001) ................................................................. 76
6.7.28 DOUT duration timeout [s] (ID=12002) .................................................................. 76
6.7.29 Trip priority priority (ID=11800) ............................................................................. 77
6.7.30 Start Speed (ID=11803)........................................................................................... 77
6.7.31 Ignition Off Timeout (ID=11804)............................................................................. 77
6.7.32 Trip mode (ID=11802)............................................................................................. 77
6.8 AUTOGEOFENCING................................................................................................................ 77
6.8.1.1 AutoGeofencing priority (ID=20000) ............................................................................. 77
6.8.1.2 Activation Timeout (ID=20003) ..................................................................................... 77
6.8.1.3 Deactivate by (ID=20005).............................................................................................. 78
6.8.1.4 AutoGeofence event generating (ID=20001) ................................................................. 78
6.8.1.5 Radius (ID=20004)......................................................................................................... 78
6.9 GPS FUEL COUNTER .............................................................................................................. 78
6.9.1.1 City Consumption L/100km (ID=11900)......................................................................... 78
6.9.1.2 Highway Consumption L/100km (ID=11901) ................................................................ 78
6.9.1.3 Average Consumption L/100km (ID=11902) ................................................................. 78
6.9.1.4 City Speed [km/h] (ID=11903)....................................................................................... 78
6.9.1.5 Highway Speed [km/h] (ID=11904) ............................................................................... 79
6.9.1.6 Average Speed [km/h] (ID=11905) ................................................................................ 79
6.9.1.7 Correction coefficient (ID=11906) ................................................................................. 79
6.9.1.8 Fuel Consumption on Idling [L/h] (ID=11907)................................................................ 79
6.9.1.9 Higher Speeds Add [%] (ID=11908)................................................................................ 79
6.9.1.10 Highway Consumption every km/h (ID=11909) ............................................................. 79
6.10 SCENARIOS ACCELEROMETER................................................................................................... 79
6.10.1 Unplug Detection.................................................................................................... 79
6.10.1.1 Scenario settings (ID=11500)......................................................................................... 79
6.10.1.2 Eventual records (ID=11501)......................................................................................... 80
6.10.1.3 Unplug detection mode (ID=11502) .............................................................................. 80
6.10.1.4 Send sms to (ID=7067) .................................................................................................. 80
6.10.1.5 SMS Text (ID=8067) ...................................................................................................... 80
6.10.2 Crash Detection ...................................................................................................... 80
6.10.2.1 Scenario settings (ID=11400)......................................................................................... 80
6.10.2.2 Duration [ms] (ID=11401) ............................................................................................. 80
6.10.2.3 Treshold [mG] (ID=11402)............................................................................................. 80
6.10.2.4 Crash trace (ID=11406) ................................................................................................. 81
6.11 BLUETOOTH......................................................................................................................... 81
6.11.1.1 BT Radio (ID=800) ......................................................................................................... 81
6.11.1.2 Local name (ID 801) ...................................................................................................... 81
6.11.1.3 Local PIN (ID=802) ........................................................................................................ 81
6.11.1.4 Security mode (ID=803) ................................................................................................ 81
6.11.1.5 External MAC (ID=804).................................................................................................. 81
6.11.1.6 External name (ID=805) ................................................................................................ 81
6.11.1.7 External PIN (ID=806).................................................................................................... 82
6.11.1.8 Connection mode (ID=807) ........................................................................................... 82
6.11.1.9 Authorized devices MAC list (ID=830 - 834)................................................................... 82
6.12 I/O PARAMETERS.................................................................................................................. 82
6.12.1 I/O#1 property parameter Ignition (ID=50000) ...................................................... 82
6.12.2 I/O#1 Logic operand (ID=50001) ............................................................................ 82
6.12.3 I/O#1 High level (ID=50002) ................................................................................... 83
6.12.4 I/O#1 Low level (ID=50003) .................................................................................... 83
6.12.5 I/O#1 Event only (ID=50004) .................................................................................. 83
6.12.6 I/O#1 averaging length (ID=50005)........................................................................ 84
6.13 I\O ELEMENTS PARAMETERS AND TYPES. ................................................................................... 84
7SPY CALL FUNCTIONALITY ................................................................................................... 88
CHANGE LOG............................................................................................................................... 90

6
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, before unplugging the power supply, do not
touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
Please consult representatives of your vehicle model
regarding OBD II location on your vehicle. In case you
are not sure of proper connection, please consult
qualified personnel.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FMB010 has USB interface;
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FMB010 connection.
Warning! Do not use FMB010 device if it distracts driver
or causes inconvenience due to OBD II placement.
Device must not interfere with driver.
1.2 Instructions of safety
This chapter contains information on how to operate FMB010 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses a 10 V...16 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V...16 V DC.
To avoid mechanical damage, it is advised to transport the FMB010 device in an impact-
proof package.
Before dismounting the device from the vehicle, ignition must be off.

7
1.3 Legal Notice
Copyright © 2017 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FMB010 device.
Acronyms and terms used in document:
PC –Personal Computer;
GPS –Global Positioning System;
GPRS –General Packet Radio Service;
GNSS –Global Navigation Satellite System;
GSM –Global System for Mobile Communications;
SMS –Short Message Service;
AC/DC –Alternating Current/Direct Current;
I/O –Input/Output;
Record –AVL data stored in FMB010 memory. AVL data contains GNSS and I/O
information;
AVL packet - data packet which is being sent to the server during data transmission.
2BASIC DESCRIPTION
FMB010 is tracking terminal with GNSS and GSM connectivity, which is able to collect
device coordinates and transfer them via GSM network to server. This device is perfectly suitable
for applications, which need location acquirement of remote objects. FMB010 also has a USB
port for device status log output and entering configurations.
Package contents
1
The FMB010 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
Already implemented FMB010 device into case;
Top and bottom device cover parts;
128MB Micro SD card;
OBD II power supply adapter.
1
Package content depends on Order Code, and can be customized by customer needs.

8
2.1 Basic characteristics
GSM / GPRS / GNSS features:
Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
GPRS class 12;
SMS (text, data).
Integrated GNSS receiver
Up to -162 dBm GNSS receiver sensitivity.
Hardware features:
Built-in movement sensor;
Built-in Bluetooth 3.0;
Internal High Gain GNSS antenna;
Internal High Gain GSM antenna;
microSD card reader;
170 mAh Li-ion rechargeable 3.7 V battery;
OBD II interface.
Interface features:
Power supply: 10 ÷ 16V;
1 digital input;
CAN;
K-LINE;
USB port
OBD II;
2 LEDs indicating device status.
Special features:
Fast position fix;
High Quality track even in high density urban canyon;
Small case;
High gain internal GNSS and GSM antennas;
2 LED status indication;
Real-Time tracking;
Smart data acquisition based on:
oTime;
oAngle;
oDistance;
oIgnition or any other I/O event;
Sending acquired data via GPRS;
GPRS and SMS I/O events;
Virtual odometer;
Jamming detection;
Configurable using Secured SMS Commands;
Spy call;
Overvoltage protection.

9
2.2 Technical features
Part name
Physical specification
Technical details
Navigation LED
LED
Power supply 10...16 V DC
2 W Max
Energy consumption1:
GPRS: 50 mA r.m.s Max.,
Nominal: average 35 mA r.m.s,
GPS Sleep: average 12 mA,
Deep Sleep: average 4.5 mA2
Battery charge current:
average 120 mA,
Rated current:
250 mA,
Operation temperature:
-25 ⁰C ... +55 ⁰C
Storage temperature:
-40 ⁰C ... +70 ⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Internal fuse: 3A, 125V
Modem LED
LED
OBD-II
connector
Standard OBD-II connector
USB
Mini USB socket
Table 1. FMB010 specifications
1Energy consumption has been tested at 12V voltage with no battery charging.
2When in Deep Sleep mode no data storing and sending is activated.

10
Figure 1 FMB010 view & dimensions (tolerance ±2mm)
2.3 Technical Information about internal battery
Li-Polymer rechargeable battery, 3.7 V, 170 mAh.
Internal back-up
battery
Battery voltage V
Nominal capacity (mAh)
Power(Wh)
Charging
temperature °C
Li-Polymer
rechargeable
battery
3.75～3.90
≥170
0.64 - 0.66
0 –45
Table 2 Battery specifications
FMB010 internal battery is used for detecting external voltage disconnection.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

11
2.4 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
10
16
V
Digital Input:
Input resistance (DIN1)
15
kΩ
Input Voltage (Recommended Operating
Conditions)
0
Supply
voltage
V
Input Voltage threshold (DIN1)
5
V
2.5 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-16
16
V
Digital Input Voltage (Absolute Maximum Ratings)
-32
32
V

12
3CONNECTION, PINOUT, ACCESSORIES
3.1 How to insert micro SIM card into FMB010 device:
Remove FMB010 cover

13
Insert micro SIM card as shown (bottom
slot)
Insert SD card as shown (top slot)
Attach cover
Device is ready

14
3.2 Installing FMB010 drivers
Software requirements:
• Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
• MS .NET Framework V3.5 or later (http://www.microsoft.com or
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).
Drivers:
Please download MediaTek inbox COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FMB0/MS_USB_ComPort_Driver_exe_v1.1032.3.zip
Installing drivers:
Extract and run FP_INBOX_InstallDriver_v1.1032.3.exe. This driver is used to detect FMB010
device connected to the computer. Click 'Next' in driver installation window (figures below):
Figure 2 Driver installation window
This will launch device driver installation wizard. In the following window click ‘Install’
button:
Figure 3 Driver installation window

15
Setup will continue installing drivers and will display a window about successful process at
the end. Click 'Finish' to complete setup:
Figure 4 Driver installation window
You have now installed drivers for FMB010 device successfully.

16
3.3 OBD II
Figure 5 OBD II pinout
Pin
Nr.
Pin Name
Description
1
Ignition input
2
PWM_BUS+/VPW
3
-
4
GND (-)
Ground pin.
5
GND (-)
Ground pin.
6
CAN_H
7
K-Line
8
-
9
-
10
PWM_BUS-
11
-
12
-
13
-
14
CAN_L
15
L-Line
16
Power +(1016) V DC
Power range +(10...16) V DC to ground
Table 3 FMB010 pinout description

17
3.4 Navigate LED
3.5 Status LED
Behavior
Meaning
Blinking every second
Normal mode
Blinking every 2 seconds
Deep sleep mode
Blinking fast for a short time
Modem activity
Blinking fast constantly
Boot mode
Off
Device is not working
Or
Device firmware being flashed
4OPERATIONAL BASICS
4.1 Operational principals
FMB010 module is designed to acquire records and send them to the server. Records
contain GNSS data and I/O information. Module uses GNSS receiver to acquire GNSS data and is
powered with three data acquiring methods: time-based, distance-based and angle-based. Note,
that if FMB010 loses connection to GNSS satellites, it continues to make records, however
coordinate in these records remains the same (last known coordinate). All data is stored in flash
memory and later can be sent via GPRS.
GPRS and SMS settings are described in later sections. FMB010 communicates with server
using special data protocol.
FMB010 can be managed by SMS commands. SMS Command list is described in SMS
COMMAND LIST section. Module configuration can be performed only via SMS.
4.2 Sleep mode
4.2.1 Sleep mode
FMB010 is able to go to sleep mode if such mode is enabled.
This timeout (defined period) starts counting when device is in STOP mode. After timeout
is reached and all conditions for sleep mode are met, device goes to sleep mode. While in sleep
mode, FMB010 turns GPS module off and it is still making new periodic records. As a result
power usage decreases, in turn saving vehicle battery.
FMB010 can enter sleep mode if ALL of these conditions are met:
FMB010 has to be configured to work in Sleep mode and start sleep timeout is
reached;
Behavior
Meaning
Permanently switched on
GNSS signal is not received
Blinking every second
Normal mode, GNSS is working
Off
GNSS is turned off because:
Deep sleep mode
Or
GNSS antenna short circuited

18
Device must have synchronized time with GNSS satellites;
No movement by movement sensor is detected;
Ignition (configured Ignition Source) is off.
FMB010 exits sleep mode when if ONE of following conditions are true:
Movement by movement sensor is detected;
Ignition (configured Ignition Source) is turned on.
4.2.2 Deep Sleep mode
While in deep sleep mode, FMB010 sets GNSS receiver to sleep mode and turns off
GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last
known coordinate are being saved and send to AVL server (GSM/GPRS module is turned on to
send data and after that it is turned off again), power usage is decreased to save vehicle’s
battery. Note, that power saving depends on two configurable parameters: send period and min.
record saving period in “X on Stop Mode”.
FMB010 can enter deep sleep mode if ALL of these conditions are met:
FMB010 has to be configured to work in Deep Sleep mode;
Device must be synchronized time with GNSS satellites;
FMB010 has to be in „X on Stop Mode“ (Configured by Mode switch parameter);
Movement by accelerometer is not detected;
Ignition (Configured to be detected by Power Voltage, Ignition or Accelerometer) is
off;
Min. Record Saving Period (Data Acquisition Mode settings) must be bigger than
Active Data Link Timeout parameter, that FMB010 could close GPRS link.
Send period (Data Acquisition Mode settings) minus Active Data Link Timeout must
be more than 90 sec., that FMB010 could close GPRS link for at least 90 sec.
Sleep timeout is reached.
FMB010 exits deep sleep mode when if ONE of following conditions are true:
Movement by accelerometer is detected;
Ignition (Configured to be detected by Power Voltage, Ignition or Accelerometer) is turned
on.
4.2.3 Online Sleep mode
In this mode device works as in Deep Sleep mode, but without turning off GSM network.
GSM part stays powered, so this increases power consumption. In this mode, device should
received/send SMS and make/receive calls. Also not closes GPRS context, if previously opened.
4.3 Virtual odometer
Virtual odometer is used to calculate traveled distance in FMB010 as a separate I/O
element. When FMB010 detects movement, it starts counting distance using GNSS signal: every
second it checks current location and calculates distance between current and previous point. It
keeps adding these intervals until it is time to make a record, then FMB010 records its location

19
and adds odometer value, which is equal to the sum of all distances, measured every second.
User can choose Odometer mode: 0 –Normal mode, or 1 –Continuous.
At Normal mode, when record is made, odometer resets to zero and distance calculation
starts all over again.
Continuous odometer mode requires ignition (configured Ignition source) to be turned on.
Odometer counts all distance calculations from records and sums them to one distance.
Continuous odometer stops counting, when vehicle is at stop and ignition is turned off.
Figure 6 Odometer continuous and Not continuous distance counting parameter example
4.4 Features
Using available features can greatly increase FMB010 usability options.
4.4.1 Green Driving/Eco Driving Scenario.
Helps to prevent and inspect driver about harsh driving. Scenario continuously monitors:
accelerating force, braking force and cornering angles.
To prevent generating false events, harsh acceleration and harsh braking is monitored only
when following conditions are fulfilled:
Ignition is ON (DIN1 = 1)
Vehicle speed is equal or higher than 10km/h
Harsh cornering is monitored only when following conditions are fulfilled:
Ignition is ON (DIN1 = 1)
Vehicle speed is equal or higher than 30km/h
Eco Driving or Green Driving? Eco driving works depending on accelerometer data and
Green driving uses GPS data.
Note: Green Driving and Eco Driving Scenarios are a factor on various cars and
various drivers testing phase and can be subject to changes. Teltonika is
constantly working on improvement of the functionality of the devices, and
strongly recommends using the latest version of the firmware.

20
4.4.2 Over Speeding Scenario.
Helps to prevent from exceeding fixed speed.
4.4.3 Jamming detection
Jamming detection shows when GSM signal jamming occurs.
4.4.4 Trip
Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,
view driven total distance
3
.
Note: Scenarios and Trip feature are activated only if DIN1=1 (ignition is on).
4.5 Accelerometer scenarios
4.5.1 Towing Detection
Towing detection scenario helps to inform driver about car deporting. FMB010 generates
event when car is being towed or raised, for example in case of vehicle evacuation.
FMB010 activates towing function when these conditions are met:
•Ignition (configured Ignition Source) is OFF
•Activation Timeout (set in Towing detection features) is reached
When Activation Timeout is reached and Ignition is still in OFF state, FMB010 monitors
accelerometer data. If Acceleration or Angle value reaches configured threshold for configured
Duration (in ms), check Ignition state. If Ignition is still OFF during configured "Ignition check after
Event Timeout" time, then event is generated. If configured - sends sms event or makes a call.
Function will be reactivated after FMB010 again detects change of Ignition state from ON
to OFF.
4.5.2 Unplug Detection
Unplug detection Scenario generates event when FMB010 is unplugged from OBD socket.
4.5.3 Crash Detection
If Crash detection is enabled, it monitors acceleration on each axis, if acceleration exceeds
configured value for longer then configured duration, event with value “1”is generated.
3
Continuous odometer –total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.