Teltonika Telematics FMM650 Installation guide

FMM650
Professional tracker with CAN data
reading feature
Quick Manual v1.1

Quick Manual v1.1 // FMM650 2
CONTENT
Know your device................................................................................................................................................................................................3
Pinout ...................................................................................................................................................................................................................4
Wiring scheme.....................................................................................................................................................................................................5
Set up your device ..............................................................................................................................................................................................6
PC Connection (Windows)..................................................................................................................................................................................7
How to install USB drivers (Windows) ..............................................................................................................................................................7
Conguration (Windows) ...................................................................................................................................................................................8
Quick SMS conguration................................................................................................................................................................................. 10
Mounting recommendations.......................................................................................................................................................................... 12
Basic characteristics ........................................................................................................................................................................................ 13
LED indications................................................................................................................................................................................................. 13
Electrical characteristics.................................................................................................................................................................................. 16
Safety information ........................................................................................................................................................................................... 18
Certication and Approvals ............................................................................................................................................................................ 19
Warranty ........................................................................................................................................................................................................... 20
Warranty disclaimer ....................................................................................................................................................................................... 20

Quick Manual v1.1 // FMM650 3
KNOW YOUR DEVICE
GNSSS ANTENNA
SOCKET
STATUS
LED
J1708 CELLULAR ANTENNA
SOCKET
NAVIGATE
LED
DUAL-SIM
SLOT
BATTERY
SOCKET
MICRO-USBRS232
RS232/RS485
MICRO SD
SLOT
2x10
SOCKET
TOP VIEW TOP VIEW (WITHOUT COVER)BOTTOM VIEW (WITHOUT COVER)

Quick Manual v1.1 // FMM650 4
PIN NUMBER PIN NAME DESCRIPTION
1 GND (-) Ground
2CAN 1L SAE J1939 CAN interface Low
channel 1
31WIRE
POWER
Power supply pin for Dallas
1-Wire® devices
4 DIN4 Digital input, channel 1
5 DIN2 Digital input, channel 2
6CAN 2L SAE J1939 CAN interface Low
channel 2
7AIN2 Analog input, channel 2. Input
range: 0-30V/0-10V DC
8 DOUT3 Digital output. Open collector
output
9 DOUT2 Digital output. Open collector
output
10 AIN3 Analog input, channel 3. Input
range: 0-30V/0-10V DC
11 VCC (+) Power supply (+8-32 V DC)
12 CAN 1H SAE J1939 CAN interface High
channel 1
13 1WIRE DATA Data channel for Dallas 1-Wire®
devices
14 DIN3 Digital input, channel 3
15 IGN (DIN1)
Digital input, channel 1.
DEDICATED FOR IGNITION
INPUT
PINOUT
18
17
16
15
19
20
8
7
6
5
9
10
AIN1
DOUT4/AIN4
DOUT1
DIN1
CAN2H
K-LINE
AIN2
DOUT3
DOUT2
CAN2L
DIN2
AIN3
14
13
12
11
4
3
2
1
1WIRE DATA
DIN3
+8...32 V DC
CAN1H
1WIRE POWER
DIN4
CAN1L
GND
FMM650 2x10 socket pinout
16 CAN 2H SAE J1939 CAN interface High
channel 2
17 AIN1 Analog input, channel 1. Input
range: 0-30V/0-10V DC
18 DOUT4/
AIN4
Digital output. Open collector
output OR Analog input, channel
4. Input range: 0-30V/0-10V DC
19 DOUT1 Digital output. Open collector
output
20 K-Line
K-LINE interface for online
Tachograph Vehicle Data
transfer

Quick Manual v1.1 // FMM650 5
WIRING SCHEME
BUZZER LED LIGHTS
RELAY
FUEL GAUGE
IBUTTON
POWER SUPPLY
8 - 32V DC
ANALOG
LLS SENSOR ALA RM BUTTON
MULTIPLE
TEMP ERATUR E
SENSORS
30
8586
87a
87
IGNITION
DETECTION
STARTER
TACHOGRAPH
J1939 RFID
CONFIGURATION
VIA PC
RS232
MULTIPLE
LLS SENSORS
BUFFERED
TRANSPARENT
MODE
RS485
RJ9 FUEL DATA
J1708 PROTOCOL
SUPPORT
CONTINENTAL
TPMS
CAN ADAPTERS
USB
20
19
18
17
16
15
14
13
12
11
10
9
8
6
7
5
4
2
1
3
DIN3
1WIRE DATA
+8...32 V DC
DO UT4/AI N4
CAN2H
CAN1H
DIN1
AIN1
DOUT1
K-LINE
AIN3
1WIRE POWER
DIN4
GND
DOUT2
CAN2L
DOUT3
DIN2
CAN1L
AIN2
GARMIN
BUFFERED
TRANSPARENT
MODE
RFID
LLS SENSOR
CARRIER
FREEZER
IRIDIUM EDGE

Quick Manual v1.1 // FMM650 6
SET UP YOUR DEVICE
HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY
1
4
UNSCREW SCREWS
BATTERY CONNECTION
3
6
SIM CARD INSERT
DEVICE IS READY
2
5
COVER REMOVAL
ATTACHING COVER BACK
Unscrew 4 screws counterclockwise that
are located on the bottom of the device.
Connect battery as shown to device.
Remove the cover
After conguration, see “PC Connection
(Windows)”, attach device cover back.
Insert SIM card as shown with PIN
request disabled or read Security
info1how to enter it later in Teltonika
Congurator2. Make sure that SIM card
cut-o corner is pointing forward to slot.
SIM slot 1 is closer to PCB, SIM slot 2 is
the upper one.
1 wiki.teltonika.lt/view/FMM650_Security_info
2 wiki.teltonika.lt/view/Teltonika_Congurator
Screw in all screws. Device is ready to be
mounted.

Quick Manual v1.1 // FMM650 7
PC CONNECTION (WINDOWS)
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the conrmation window will appear. Click Finish to complete the
setup.
1 teltonika-gps.com/downloads/en/FMM650/TeltonikaCOMDriver.zip
1. Power-up FMM650 with DC voltage (8 – 32 V) power supply using supplied power cable. LED’s should start blinking, see “LED
indications1”.
2. Connect device to computer using Micro-USB cable or Bluetooth connection:
• Using Mini-USB cable
• You will need to install USB drivers, see “How to install USB drivers (Windows)2”
3. You are now ready to use the device on your computer.
1 wiki.teltonika-gps.com/view/FMM650_LED_status
2 Page 7, "How to install USB drivers"

Quick Manual v1.1 // FMM650 8
MS .NET REQUIREMENTS
Operating system MS .NET Framework version Version Links
Windows Vista
Windows 7
Windows 8.1
Windows 10
MS .NET Framework 4.6.2 32 and 64 bit www.microsoft.com1
1 dotnet.microsoft.com/en-us/download/dotnet-framework/net462
At rst FMM650 device will have default factory settings set. These settings should be changed according to the users needs. Main
conguration can be performed via Teltonika Congurator1software. Get the latest Congurator version from here2. Congurator
operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1 wiki.teltonika-gps.com/view/Teltonika_Congurator
2 wiki.teltonika-gps.com/view/Teltonika_Congurator_versions
CONFIGURATION (WINDOWS)

Quick Manual v1.1 // FMM650 9
Downloaded Congurator will be in compressed archive.
Extract it and launch Congurator.exe. After launch software
language can be changed by clicking 🌐in the right bottom
corner.
Conguration process begins by pressing on connected device.
FMM650
Various Status window1 tabs display information about GNSS2,
GSM3, I/O4, Maintenance5 and etc. FMM650 has one user
editable prole, which can be loaded and saved to the device.
After any modication of conguration the changes need to
be saved to device using Save to device button. Main buttons
oer following functionality:
 Load from device – loads conguration from device.
 Save to device – saves conguration to device.
 Load from le – loads conguration from le.
 Save to le – saves conguration to le.
 Update rmware – updates rmware on device.
 Read records – reads records from the device.
 Reboot device – restarts device.
 Reset conguration – sets device conguration to
default.
Most important congurator section is GPRS – where all
your server and GPRS settings6 can be congured and Data
Acquisition7– where data acquiring parameters can be
congured. More details about FMM650 conguration using
Congurator can be found in our Wiki8.
After connection to Congurator Status window will be
displayed.
FMM650
1 wiki.teltonika-gps.com/view/FMM650_Status_info
2 wiki.teltonika-gps.com/view/FMM650_Status_info#GNSS_Info
3 wiki.teltonika-gps.com/view/FMM650_Status_info#GSM_Info
4 wiki.teltonika-gps.com/view/FMM650_Status_info#I.2FO_Info
5 wiki.teltonika-gps.com/view/FMM650_Status_info#Maintenance
6 wiki.teltonika-gps.com/index.php?title=FMM650_GPRS_settings
7 wiki.teltonika-gps.com/index.php?title=FMM650_Data_acquisition_
settings
8 wiki.teltonika-gps.com/index.php?title=FMM650_Conguration

Quick Manual v1.1 // FMM650 10
QUICK SMS CONFIGURATION
Default conguration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
Note: Before SMS text, two space symbols should be inserted.
GPRS SETTINGS:
 2001 – APN
 2002 – APN username (if there are no APN username,
empty eld should be left)
 2003 – APN password (if there are no APN password,
empty eld should be left)
SERVER SETTINGS:
 2004 – Domain
 2005 – Port
 2006 – Data sending protocol (0 – TCP, 1 – UDP)
« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»
1 2 3 4 5 6
1
2
3
4
5
6