Teltonika FM1110 User manual

FM1110 User Manual
v1.15

2
Table of contents
1INTRODUCTION ..................................................................................................................... 6
1.1 ATTENTION............................................................................................................................ 6
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 6
1.3 LEGAL NOTICE........................................................................................................................ 7
1.4 ABOUT DOCUMENT ................................................................................................................. 7
2BASIC DESCRIPTION ............................................................................................................... 7
2.1 PACKAGE CONTENTS ................................................................................................................ 7
2.2 BASIC CHARACTERISTICS ........................................................................................................... 7
2.3 TECHNICAL FEATURES............................................................................................................... 9
2.4 ELECTRICAL CHARACTERISTICS.................................................................................................. 10
2.5 ABSOLUTE MAXIMUM RATINGS............................................................................................... 11
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 11
3.1 HOW TO INSERT SIM CARD INTO FM1110 DEVICE: .................................................................... 11
3.2 INSTALLING FM1110 DRIVERS ................................................................................................ 12
3.3 NAVIGATE LED..................................................................................................................... 14
3.4 STATUS LED ........................................................................................................................ 14
3.5 SOCKET 2 5........................................................................................................................ 14
3.6 USB................................................................................................................................... 15
3.7 ACCESSORIES........................................................................................................................ 16
4FIRMWARE .......................................................................................................................... 19
4.1 UPDATING FIRMWARE USING USB CABLE .................................................................................. 19
5OPERATIONAL BASICS.......................................................................................................... 20
5.1 OPERATIONAL PRINCIPALS....................................................................................................... 20
5.2 SLEEP MODES....................................................................................................................... 20
5.2.1 Sleep mode ............................................................................................................. 20
5.2.2 Deep Sleep mode .................................................................................................... 20
5.3 VIRTUAL ODOMETER.............................................................................................................. 21
5.4 FEATURES............................................................................................................................ 21
5.4.1 Scenarios ................................................................................................................ 21
5.4.2 Trip.......................................................................................................................... 22
5.4.3 Geofencing.............................................................................................................. 23
5.4.4 iButton list .............................................................................................................. 23
5.5 CONFIGURATION.............................................................................................................. 24
5.6 CONFIGURATOR.................................................................................................................... 24
5.7 RECORD STORAGE ................................................................................................................. 26
5.8 SYSTEM SETTINGS.................................................................................................................. 27
5.9 RECORDS SETTINGS................................................................................................................ 28
5.10 GSM SETTINGS,GPRS PART................................................................................................... 28
5.11 GSM SETTINGS,SMS PART .................................................................................................... 29
5.12 GSM SETTINGS,OPERATOR LIST .............................................................................................. 30
5.13 DATA ACQUISITION MODE SETTINGS ........................................................................................ 30
5.14 FEATURES SETTINGS............................................................................................................... 34
5.14.1 Scenarios settings ................................................................................................... 34
5.14.2 Trip settings ............................................................................................................ 36
5.14.3 Geofencing settings ................................................................................................ 37
5.14.4 SMS events ............................................................................................................. 39
5.14.4.1 SMS events configuration ................................................................................................. 40
5.15 I/O SETTINGS ....................................................................................................................... 43
5.15.1 Monitoring.............................................................................................................. 46
5.15.2 Event Generating.................................................................................................... 46
5.15.3 Hysteresis ............................................................................................................... 47

3
6SMS COMMAND LIST ........................................................................................................... 47
6.1 SMS COMMAND LIST............................................................................................................. 47
6.1.1 getstatus................................................................................................................. 48
6.1.2 getweektime........................................................................................................... 49
6.1.3 getops..................................................................................................................... 49
6.1.4 getcfgtime .............................................................................................................. 49
6.1.5 getgps..................................................................................................................... 49
6.1.6 getver ..................................................................................................................... 49
6.1.7 getinfo .................................................................................................................... 50
6.1.8 getio........................................................................................................................ 50
6.1.9 readio #................................................................................................................... 50
6.1.10 setdigout ## Y1 Y2 .................................................................................................. 51
6.1.11 getparam #### ....................................................................................................... 51
6.1.12 setparam ####........................................................................................................ 51
6.1.13. getparam 1271 X/212 X ......................................................................................... 51
6.1.14. setparam 1271 X/212 X .......................................................................................... 51
6.1.15 readops # ................................................................................................................ 51
6.1.16 flush #,#,#,#,#,#,# ................................................................................................... 51
6.1.17 sn # ......................................................................................................................... 52
6.1.18 banlist ..................................................................................................................... 52
6.1.19 crashlog .................................................................................................................. 52
7DEBUG MODE ...................................................................................................................... 52
8PARAMETER LIST ................................................................................................................. 53
8.1 PARAMETERS VALUE TYPES...................................................................................................... 53
8.2 SYSTEM PARAMETERS ............................................................................................................ 53
8.2.1 Sleep Mode (ID=1000) ............................................................................................ 53
8.2.2 Sleep timeout (ID=200) ........................................................................................... 53
8.2.3 Analog Input value range (ID=1001) ...................................................................... 54
8.2.4 Stop Detection Source (ID=1002)............................................................................ 54
8.2.5 Static Navigation (ID=1003) ................................................................................... 54
8.2.6 Ignition Source (ID =1004) ...................................................................................... 54
8.2.7 Saving/Sending without time synchronization (ID=201) ........................................ 54
8.2.8 GNSS System (ID=202) ............................................................................................ 55
8.3 RECORDS PARAMETERS .......................................................................................................... 55
8.3.1 Sorting (ID=1010) ................................................................................................... 55
8.3.2 Active Data Link Timeout (ID=1011) ....................................................................... 55
8.3.3 Server Response Timeout (ID=1012)....................................................................... 55
8.4 GSM PARAMETERS ............................................................................................................... 56
8.4.1 GPRS content activation (ID=1110)....................................................................... 56
8.4.2 APN Name (ID=1112)............................................................................................ 56
8.4.3 APN username (ID=1113) ..................................................................................... 56
8.4.4 APN Password (ID=1114) ...................................................................................... 56
8.4.5 Domain (ID=1115) .................................................................................................. 56
8.4.6 Target Server Port (ID=1116).................................................................................. 57
8.4.7 Protocol (ID=1117)................................................................................................ 57
8.4.8 SMS Login (ID=1122) .............................................................................................. 57
8.4.9 SMS Password (ID=1123)........................................................................................ 57
8.4.10 SMS data sending settings (ID=1120)..................................................................... 57
8.4.11 SMS Data send week time schedule (ID=1143) ...................................................... 57
8.4.12 Authorized phone numbers (ID=1130-1139) .......................................................... 58
8.4.13 SMS Event PreDefined Numbers (ID=150-159)....................................................... 58
8.4.14 Operator List (ID=1141 X) ....................................................................................... 58
8.5 DATA ACQUISITION MODES PARAMETERS.................................................................................. 58
8.5.1 Home Network GSM operator code “Vehicle on STOP” parameters ...................... 58
8.5.1.1 Min Period (ID=1540).......................................................................................................... 58
8.5.1.2 Min Saved Records (ID=1543)............................................................................................. 59

4
8.5.1.3 Send Period (ID=1544) ........................................................................................................ 59
8.5.1.4 GPRS Week Time (ID=1545)................................................................................................ 59
8.5.2 Home Network GSM operator code “Vehicle MOVING” parameters ..................... 59
8.5.2.1 Min Period (ID=1550).......................................................................................................... 59
8.5.2.2 Min Distance (ID=1551) ...................................................................................................... 60
8.5.2.3 Min Angle (ID=1552)........................................................................................................... 60
8.5.2.4 Min Saved Records (ID=1553)............................................................................................. 60
8.5.2.5 Send Period (ID=1554) ........................................................................................................ 60
8.5.2.6 GPRS Week Time (ID=1555)................................................................................................ 60
8.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 60
8.5.3.1 Min Period (ID=1560).......................................................................................................... 60
8.5.3.2 Min Saved Records (ID=1563)............................................................................................. 61
8.5.3.3 Send Period (ID=1564) ........................................................................................................ 61
8.5.3.4 GPRS Week Time (ID=1565)................................................................................................ 61
8.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 61
8.5.4.1 Min Period (ID=1570).......................................................................................................... 61
8.5.4.2 Min Distance (ID=1571) ...................................................................................................... 61
8.5.4.3 Min Angle (ID=1572)........................................................................................................... 61
8.5.4.4 Min Saved Records (ID=1573)............................................................................................. 62
8.5.4.5 Send Period (ID=1574) ........................................................................................................ 62
8.5.4.6 GPRS Week Time (ID=1575)................................................................................................ 62
8.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 62
8.5.5.1 Min Period (ID=1580).......................................................................................................... 62
8.5.5.2 Min Saved Records (ID=1583)............................................................................................. 62
8.5.5.3 Send Period (ID=1584) ........................................................................................................ 62
8.5.5.4 GPRS Week Time (ID=1585)................................................................................................ 63
8.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 63
8.5.6.1 Min Period (ID=1590).......................................................................................................... 63
8.5.6.2 Min Distance (ID=1591) ...................................................................................................... 63
8.5.6.3 Min Angle (ID=1592)........................................................................................................... 63
8.5.6.4 Min Saved Records (ID=1593)............................................................................................. 63
8.5.6.5 Send Period (ID=1594) ........................................................................................................ 64
8.5.6.6 GPRS Week Time (ID=1595)................................................................................................ 64
8.6 FEATURES PARAMETERS ......................................................................................................... 64
8.6.1 Digital Output No.1 usage scenarios (ID=1600) ..................................................... 64
8.6.1 Max Acceleration Force (ID=1602) ......................................................................... 64
8.6.2 Max Braking Force (ID=1603) ................................................................................. 64
8.6.3 Max Angular Velocity (ID=1604)............................................................................. 64
8.6.4 Max allowed Speed (ID=1605)................................................................................ 65
8.6.5 Digital Output No.2 usage scenarios (ID=1601) ..................................................... 65
8.6.6 Trip (ID=1150)......................................................................................................... 65
8.6.7 Start Speed (ID=1151)............................................................................................. 65
8.6.8 Ignition Off Timeout (ID=1152)............................................................................... 65
8.6.9 Trip Continuous distance counting (ID=1153) ........................................................ 65
8.6.10 Geofencing.............................................................................................................. 66
8.6.10.1 Frame border (ID=1020) ................................................................................................... 66
8.6.10.2 Geofence Zone #1 Shape (ID=1030) ................................................................................. 66
8.6.10.3 Geofence Zone #1 Priority (ID=1031) ............................................................................... 66
8.6.10.4 Geofence Zone #1 Generate Event (ID=1032) .................................................................. 66
8.6.10.5 Geofence Zone #1 Longitude (X1) (ID=1033).................................................................... 66
8.6.10.6 Geofence Zone #1 Latitude (Y1) (ID=1034)....................................................................... 67
8.6.10.7 Geofence Zone #1 Longitude (X2) (ID=1035).................................................................... 67
8.6.10.8 Geofence Zone #1 Latitude (Y2) (ID=1036)....................................................................... 67
8.6.11 AutoGeofencing...................................................................................................... 67
8.6.11.1 Enable/Disable (ID=1101) ................................................................................................. 67
8.6.11.2 Activation Timeout (ID=1102)........................................................................................... 68
8.6.11.3 Deactivate by (ID=1100) ................................................................................................... 68
8.6.11.4 AutoGeofence event Priority (ID=1103) ........................................................................... 68
8.6.11.5 AutoGeofence event generating (ID=1104)...................................................................... 68
8.6.11.6 Radius (ID=1105)............................................................................................................... 68
8.6.12 iButton List (ID=1610-1659).................................................................................... 68
8.7 I/O PARAMETERS.................................................................................................................. 69

5
8.7.1 I/O#1 property parameter (ID=1160) ..................................................................... 69
8.7.2 I/O#1 priority (ID=1161) ......................................................................................... 69
8.7.3 I/O#1 High level (ID=1162) ..................................................................................... 69
8.7.4 I/O#1 Low level (ID=1163) ...................................................................................... 69
8.7.5 I/O#1 logic operand (ID=1164) ............................................................................... 70
8.7.6 I/O#1 averaging length (ID=1165).......................................................................... 70
8.8 SMS EVENT CONFIGURATION .................................................................................................. 72
8.8.1 I/O#1 element SMS event configuration (ID=100).................................................. 72
9MOUNTING RECOMMENDATIONS ....................................................................................... 74
9.1 CONNECTING WIRES.............................................................................................................. 74
9.2 CONNECTING POWER SOURCE................................................................................................. 74
9.3 CONNECTING IGNITION WIRE .................................................................................................. 74
9.4 CONNECTING GROUND WIRE .................................................................................................. 74
9.5 MODULE INSTALLATION ......................................................................................................... 75
10 CHANGE LOG ................................................................................................................... 76

6
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FM1110 has USB interface;
Please use cables provided with FM1110 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FM1110 connection.
1.2 Instructions of safety
This chapter contains information on how to operate FM1110 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses a 10 V...30 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FM1110 device in an impact-
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
When connecting the connection (2x5) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x5 connection must be disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.

7
The device FM1110 is not designed as a navigational device for boats.
1.3 Legal Notice
Copyright © 2014 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FM1110 device.
Acronyms and terms used in document
PC –Personal Computer.
GPRS –General Packet Radio Service
GPS –Global Positioning System
GSM –Global System for Mobile Communications
SMS –Short Message Service
AC/DC –Alternating Current/Direct Current
I/O –Input/Output
Record –AVL data stored in FM1110 memory. AVL data contains GPS and I/O information
AVL packet - data packet that is being sent to server during data transmission. AVL packet
contains from 1 to 50 records.
2BASIC DESCRIPTION
FM1110 is a terminal with GPS and GSM connectivity, which is able to determine the
object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for
applications, which need location acquirement of remote objects. It is important to mention that
FM1110 has additional inputs and outputs, which let you control and monitor other devices on
remote objects. FM1110 also has a USB port for device status log output and entering
configurations.
2.1 Package contents
1
The FM1110 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
FM1110 device;
Input and output power supply cable with a 2x5 connection pins;
USB cable;
A card containing URL to download FM1110 device drivers and Configurator software.
2.2 Basic characteristics
GSM / GPRS features:
1
Package content depends on Order Code, and can be customized by customer needs.

8
Teltonika TM11Q quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
GPRS class 10;
SMS (text, data).
GNSS features:
TG3300 32 channel (or equivalent) receiver;
Up to -161 dBm sensitivity.
Hardware features:
Cortex®-M3 processor;
1 MB internal Flash memory;
Built-in accelerometer.
Interface features:
Power supply: 10 ÷ 30V;
USB port;
3 digital inputs;
1 analog input;
2 open collector digital outputs;
1Wire® temperature sensor
1Wire® iButton
LEDs indicating device status.
Special features:
Any element event triggers (external sensor, input, speed, temperature, etc.);
Highly configurable data acquisition and sending;
Multiple Geo-fence areas;
Sleep mode;
Deep sleep mode;
Configurable scenarios available;
Real-time process monitoring;
Authorized number list for remote access;
Firmware update over GPRS or USB port;
Configuration update over GPRS, SMS or USB port;
TCP/IP or UDP/IP protocol support;
8000 record storing.
Overvoltage protection (new devices with order code FM1110 Vxxxxx):
Description
Voltage
Duration
Normal operation
10-30V
Unlimited
Protection turns on, device turns off.
34V
Unlimited
Maximum voltage
<70V
Unlimited
Maximum voltage impulse
90V
5 mili seconds

9
Technical features
Part name
Physical specification
Technical details
Navigation LED
LED
Power supply 10...30 V DC
2W Max
Energy consumption:
GPRS: 150 mA r.m.s Max.,
Nominal: average 65 mA r.m.s,
GPS Sleep: average 28 mA,
Deep Sleep: average less than
2 mA2
Operation temperature:
-25⁰C ... +55⁰C
Storage temperature:
-40⁰C ... +70⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Modem LED
LED
Socket 2x5
Tyco Micro MATE-N-LOK™
4-794628-0 or similar
USB
Mini USB socket
Table 1. FM1110 specifications
Figure 1 FM1110 view & dimensions (tolerance ±2mm)
2When in Deep Sleep mode no data storing and sending is activated.

10
2.3 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
10
30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
uA
Drain current (Digital Output ON,
Recommended Operating Conditions)
300
mA
Static Drain-Source resistance (Digital
Output ON)
300
mOhm
Digital Input:
Input resistance (DIN1, DIN2, DIN3)
15
kOhm
Input Voltage (Recommended Operating
Conditions)
0
Supply
voltage
V
Input Voltage threshold (DIN1)
7,5
V
Input Voltage threshold (DIN2, DIN3)
2,5
V
Analog Input:
Input Voltage (Recommended Operating
Conditions), Range1
0
10
V
Input resistance, Range1
120
kOhm
Measurement error
1,43
%
Additional error
±12
mV
Input Voltage (Recommended Operating
Conditions) Range2
0
30
V
Input resistance, Range2
146,7
kOhm
Measurement error
1,75
%
Additional error
±36
mV
Output Supply Voltage 1-Wire:3
Supply Voltage
3,3
3,6
V
Output inner resistance
7
Ohm
Output current (Uout > 3.0V)
30
mA
Short circuit current (Uout = 0)
130
mA
3
1-wire Supply voltage PIN is dedicated for 1-wire devices ONLY, do not use it for any other purpose.

11
Note: Analog Input error margin can increase if temperature varies. If Analog
input is not connected FM1110 will still measure certain numbers and it
cannot be 0. This measurement is influenced by hardware components.
2.4 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-32
32
V
Drain-Source clamp threshold voltage (Absolute
Maximum Ratings), (Idrain = 2mA)
36
V
Digital Input Voltage (Absolute Maximum Ratings)
-32
32
V
Analog Input Voltage (Absolute Maximum Ratings)
-32
32
V
3CONNECTION, PINOUT, ACCESSORIES
3.1 How to insert SIM card into FM1110 device:

Gently open FM1110 case using screwdrivers

12

Remove FM1110 case

Insert SIM card as shown

Attach top housing cover

Device is ready
3.2 Installing FM1110 drivers
Software requirements:
•Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
• MS .NET Framework V3.5 or later (http://www.microsoft.com or
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).
Drivers:
Please download Virtual COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FM11/vcpdriver_v1.3.1_setup.zip

13
Installing drivers:
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM1110 device
connected to the computer. Click 'Next' in driver installation window (figures below):
Figure 2 Driver installation window
This will launch device driver installation wizard. In the following window click ‘Next’
button again:
Figure 3 Driver installation window
Setup will continue installing drivers and will display a window about successful process at
the end. Click 'Finish' to complete setup:
Figure 4 Driver installation window
You have now installed drivers for FM1110 device successfully.

14
3.3 Navigate LED
Behaviour
Meaning
Permanently switched on
GPS signal is not received
Blinking every second
Normal mode, GPS is working
Off
GPS is turned off because:
Deep sleep mode
Or GPS module is turned off
3.4 Status LED
Behaviour
Meaning
Blinking every second
Normal mode
Blinking every 2 seconds
Deep sleep mode
Blinking fast for a short time
Modem activity
Blinking fast constantly
Boot mode
Off
Device is not working
Or Device firmware being flashed
3.5 Socket 2 5
DIN 1 (IGNITION)
5
10
Ucc_DALLAS
DIN 2
4
9
DIN 3
OUT 1
3
8
DATA_DALLAS
OUT 2
2
7
AIN 1
VCC (10 30)V DC(+)
1
6
GND(VCC(10 30)V DC)(-)
Figure 5 2x5 socket pinout

15
Pin
Nr.
Pin Name
Description
1
2
3
1
VCC (10 30)V DC (+)
Power supply for module. Power supply range (10...30) V DC
2
OUT 2
Digital output. Channel 2. Open collector output. Max. 300mA.
3
OUT 1
Digital output. Channel 1. Open collector output. Max. 300mA.
4
DIN 2
Digital input, channel 2
5
DIN 1
Digital input, channel 1 DEDICATED FOR IGNITION INPUT
6
GND(VCC(10 30)V DC)(-)
Ground pin. (10 30)V DC ( ―)
7
AIN 1
Analog input, channel 1. Input range: 0-30V/0-10V DC
8
DATA_DALLAS
Data channel for Dallas 1-Wire® devices
9
DIN 3
Digital input, channel 3
10
Ucc_DALLAS
+ 3,8 V output for Dallas 1-Wire® devices. (max 20mA)
Table 2. Socket 2x5 pinout description
3.6 USB
Mini USB connector
Figure 6 Mini USB type B connector
FM1110 connected to PC creates an STM Virtual COM Port, which can be used as a system
port (to flash firmware and configure the device):
Figure 7 COM-Ports

16
3.7 Accessories
Note: Teltonika does not provide any additional equipment like panic buttons,
door sensors or others.
1 –Wire devices
One of the realized features FM1110 is 1-Wire® data protocol, which enables connection
of thermometer (DS1820, DS18S20 and DS18B20) and I-Button type: DS1990A (Figures 8 and 9
show FM1110 and 1-wire® device connection schemes).
Left row of pins
1
3
4
1
2
2
J1
J2
J3
U1
Right row of pins
1W. PWR
(FM1110 –pin10)
1
1W. Data
(FM1110 –pin8)
2
1
Vpp (+5 Volts DC) –
power source for
external digital
sensor
GND
(FM1110 –pin6)
3
2
Output from external
digital sensor
Digital Input
4
Figure 8 Digital thermometer DS1820 and TTJ100 connection scheme

17
Figure 9 I-Button DS1990A connection scheme
Fuel Tank sensors
A fuel tank level sensor exists in most cars, which shows the
approximate fuel level in the driver’s indicator panel. It is possible to
connect FM1110 Analog input to it (if sensor returns analogue signal
proportional to fuel level). Figure 10 shows the connection scheme to
the FM1110 and fuel tank sensor. After the connection to the tank fuel
level sensor, calibration is needed. Calibration is needed because most
fuel tank sensors are not linear. Calibration is performed by measuring
voltage dependence on volume of fuel in tank.
Alarm buttons, door sensors, etc.
Alarm buttons, door sensors, ignition, etc. return two states: high or low voltage. Digital
inputs are used to read this information. Figure below shows how to connect alarm button, door
sensor, etc.
Figure 11 Panic button connection
In cases when sensor output signal is negative, an additional relay has to be installed to
convert negative signal to positive.
Figure 10 Fuel sensor scheme

18
Figure 12 Inverting relay connection
Immobilizer relay
When connected as shown below, FM1110 disables engine starter when output is OFF.
More details about relays can be found below.
Figure 13 Immobilizer relay connection
Relays
An ordinary automotive relay is used to invert input signal or to immobilize engine starter.
Note, that they are available as 12 V or 24 V.
Figure 14 Automotive relay pinout

19
4FIRMWARE
4.1 Updating firmware using USB cable
FM1110 functionality is always improving, new firmware versions are developed. Current
module firmware version can be retrieved from Configurator. See configuration description for
details.
Contact sales manager to get the latest firmware.
Connect FM1110 to PC with the USB cable. Launch “Firmware Updater”, select COM port
to which device is connected, click connect, and when IMEI and Firmware version fields are filled,
start the update. Device needs some time to send IMEI and Firmware version, so do not be afraid
if IMEI will not show up immediately, disconnect and after 1-2 minutes try to connect again.
Update process may take up to several minutes.
Figure 15 FM1110 firmware updater screen
Figure 16 FM1110 firmware updating finished
When you see a table like in Figure 16, it means that the firmware is flashed to FM1110
successfully. You may now close the update window and start using your FM1110 device.

20
5OPERATIONAL BASICS
5.1 Operational principals
FM1110 module is designed to acquire records and send them to the server. Records
contain GPS data and I/O information. Module uses GPS receiver to acquire GPS data and is
powered with three data acquire methods: time-based, distance-based and angle-based method.
Note, that if FM1110 loses connection to GPS satellites, it continues to make records, however
coordinate in these records remains the same (last known coordinate). Method’s details are
described in section 5.13. All data is stored in flash memory and later can be sent via GPRS or
SMS. GPRS mode is the most preferred data sending mode. SMS mode is mostly used in areas
without GPRS coverage or GPRS usage is too expensive.
GPRS and SMS settings are described in later sections. FM1110 communicates with server
using special data protocol. Data protocol is described in device protocols documentation.
FM1110 can be managed by SMS commands. SMS Command list is described in SMS
COMMAND LIST section. Module configuration can be performed over TCP or via SMS.
Configuration parameters and modes are described in device protocols documentation. Please
contact Teltonika sale manager to find out more about protocols documentation purchase.
5.2 Sleep modes
5.2.1 Sleep mode
FM1110 is able to go to sleep mode after configurable Sleep timeout. This timeout (defined
period) starts counting when device is in STOP mode. After timeout is reached and all conditions
for sleep mode are met, device goes to sleep mode.While in sleep mode, FM1110 turns GPS
module off and it is not making new periodic records. Only event records is being recorded with
last known coordinate and sent to AVL server. As a result power usage decreases allowing saving
vehicle battery.
FM1110 can enter sleep mode if ALL of these conditions are met:
FM1110 has to be configured to work in Sleep mode and Sleep timeout is reached;
Device must be synchronized time with GPS satellites;
No movement by movement sensor is detected;
Ignition (DIN1) is off;
USB cable detached;
FM1110 exits sleep mode when if ONE of following conditions are true:
Movement by movement sensor is detected;
Ignition (DIN1) is turned on;
USB cable is connected;
5.2.2 Deep Sleep mode
While in deep sleep mode, FM1110 sets GPS receiver to sleep mode and turns off
GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last
known coordinate are being saved and send to AVL server (GSM/GPRS module is turned on to
send data and after that it is turned off again), power usage is decreased to save vehicle’s