Teltonika RUT950 LTE User manual

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 2
Quick Start Guide Router
Here you will find an overview of the various components found on the front and
back sides of a RUT950 device, basic hardware installation, first login information,
device specifications and general safety information. It is highly recommended that
you acquaint yourself with with the Quick Start Guide before using the device.
Contents
 Front view
 Back view
 Connectors
 Connection status LED
 Signal strength LEDs
 Hardware installation
 Configure your computer (Windows)
 Login to device
 Safety information

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 3
Front view
No.
Description
1
LAN Ethernet ports
2
WAN Ethernet port
3
LAN LEDs
4
WAN LED
5
Power socket
6
Power LED
7 Mobile connection
status LED
8
Mobile signal
strength indication
LEDs
Back view
No.
Description
1 LTE antenna
connectors
2 WiFi antenna
connectors
3
Reset button
4 SIM card slots
Connectors
Power socket pinout
No.
Description
Wire color
1
Power
Red
2
Ground
Black
3
I/O
Green
4
I/O
White
.

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 4
Connection status LED
The connection status LED is located on the bottom right corner of the front panel, to the left
of the signal strength indication LEDs:
The LED displays the router's current connection state and network type among a few other
things:
ACTION
DESCRIPTION
Green
and
red
blinking alternatively ever 500 ms
No SIM or bad PIN
Green, red and orange
blinking alternatively every
500 ms
Connecting to GSM
Red
blinking every 1 sec
Connected 2G, no data session established
Orange
blinking every 1 sec
Connected 3G, no data session established
Green
blinking every 1 sec
Connected 4G, no data session established
Red lit and blinking rapidly while data is being
transferred
Connected 2G with data session
Orange lit and blinking rapidly while data is being
transferred
Connected 3G with data session
Green lit and blinking rapidly while data is being
transferred
Connected 4G with data session

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 5
Signal strength LEDs
The signal strength LEDs are located on the bottom right corner of the front panel, to the
right of the connection status LED:
Each lit up LED represents a different value of the router's current signal strength in RSSI:
NO. OF LIT UP LEDs
SIGNAL STRENGTH VALUE
0
≤
-
111 dBm
1
-
110 dBm to
-
97 dBm
2
-
96 dBm to
-
82 dBm
3
-
81 dBm to
-
67 dBm
4
-
66 dBm to
-
52 dBm
5
≥
-
51 dBm

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 6
Hardware installation
1. Remove the SIM card slot tray(s) with the pin needle. Insert your SIM card(s)
and push the tray(s) back into the router. Correct SIM card orientation can be
seen in the figure below:
2. Attach LTE and WiFi antennas
3. Connect the power adapter to the power socket located on the front panel of
the device. Then plug the other end of the power adapter into a power outlet.
4. Connect to the device wirelessly (SSID: RUT950_****) or use an Ethernet cable.
Configure your computer (Windows)
1. Enable the wireless network connection (go to Start → Control Panel →
Network and Internet → Network and Sharing Center. In the left panel click
the Change adapter settings link. Right click on Wireless Network
Connection and select Enable).

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 7
2. Setup wireless network adapter on your computer (right click on Wireless
Network Connection and select Properties. After that select Internet
Protocol Version 4 (TCP/IP) and click Properties).
3. Select Obtain IP address and Obtain DNS server address automatically if
they are not selected. Click OK.
4. Right click on Wireless Network Connection and select Connect to see
available wireless networks.

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 8
5. Choose the wireless network RUT950_**** from the list and click Connect.
Enter the WiFi password located on the device's label.
Login to device
1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the
URL field of your Internet browser.
2. Use the following login information when prompted for authentication:

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 9
3. After you login, you will be prompted to change your password for security
reasons. The new password must contain at least 8 characters, including at
least one uppercase letter, one lowercase letter and one digit. This step is
mandatory and you will not be able to interact with the router's WebUI
before you change the password.
4. When you change the router's password, the Configuration Wizard will start.
The Configuration Wizard is a tool used to setup some of the router's main
operating parameters.
5. Go to the Status → Network page and pay attention to the Signal Strength
indication. To maximize cellular performance try adjusting the antennas or
changing the location of your device to achieve the best signal conditions (you
can find information on signal strength recommendations here).
Safety information
The RUT950 router must be used in compliance with any and all applicable national
and international laws and with any special restrictions regulating the utilization of
the communication module in prescribed applications and environments.
Radi
o specifications
RF technologies
GSM, GPRS, EDGE, UMTS/HSPA+, LTE, WiFi
Max. RF power 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20
dBm@WiFi
Bundled accessories specifications*
Power
AC/DC power adapter 9 V 1 A, 4 pin plug
GSM/WCDMA/LTE
antenna
698~960/1710~2690 MHz, 50 Ω, VSWR < 3, gain** 3 dBi,
omnidirectional, SMA male connector
WiFi antenna 2400~2483.5 MHz, 50 Ω, VSWR < 2, gain** 5 dBi,
omnidirectional, RP
-
SMA male connector
* Order code dependent.

Documentation
W:\tsa\LTE Router\Quick Start Guide Router.docx Seite 10
** Higher gain antenna can be connected to compensate for cable attenuation when
a cable is used. The user is responsible for the compliance with the legal regulations.
This sign on the package means that is necessary to read the User's Manual
before you start using the device
This sign on the package means that all used electronic and electric
equipment should not be mixed with general household waste
Hereby, Teltonika declares that the radio equipment type RUT950 is in
compliance with Directives: 2014/53/EU, 2014/35/EU, 2014/30/EU. The full text of the
EU declaration of conformity is available at the following internet address:
http://teltonika.lt/product/rut950/