Tempo Fitness Living essetials User manual

Instruction Manual
23cm Desk Fan
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
Unit 7/15 Rodborough Rd, Frenchs Forest, Australia NSW 2086
Customer Help Line : 1300 886 649 (AU) | 0800 836 761 (NZ)
Telephone: [phone] Fax: [phone]
Email: [email protected]

Important Safety Instructions
Please keep this instruction manual in a safe place, along with
the warranty card, purchase receipt and carton for future refer-
ence. The safety precautions enclosed herein reduce the risk of
fire, electric shock and injury when correctly adhered to.
- If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
- The appliance is not intended for use by young children or infirm
persons without supervision.
- Young children should be supervised to ensure that they do not play
with the appliance.
- Do not operate the appliance outdoors.
- Power plug must be removed from power socket before cleaning,
servicing, maintenance or moving the appliance.
- The fan should be placed on a flat surface when operating to avoid
overturning.
- The fan should not be operated in a damp place or high humidity
(such as the bathroom).
- The fan is not designed to be outdoors.
- Improper installation may result in the risk of fire, electric shock and
or injury to persons.
- The unit has no user-serviceable parts contained within. Do not
attempt to repair, disassemble or modify the appliance.
- Do not insert foreign objects into the safety grille as this may cause
damage to the appliance and/or user.
- Please ensure that the power supply the fan is intended to be
plugged into matches the power rating on the rating label of the
appliance.
- During assembly, the fan guard must be secured with the screw pro-
vided, and that before cleaning the fan must first be disconnected
from the power outlet.
Care and Cleaning Instructions
Please always ensure appliances are disconnected from the power
supply and are switched off before attempting any cleaning.
The appliance is not designed to be dismantled without special tools.
Please do not attempt to separate the unit. The cleaning of the unit should
only be attempted with a slightly damp, soapy cloth. Care must be taken
to ensure there that cloth is sufficiently dry so as to not leave any standing
water. After wiping down the unit with the soapy cloth, dry any wet spots
with a dry paper towel.

Important features of your 23cm Desk Fan
Safety grille
2 speed
switches
Tilt-adjustable
pivoting head
Silent operation
Sturdy round
base
6. Your 23cm desk fan can now be used. Please ensure that the power
supply outlet corresponds with the power rating on the compliance plate
located either on the base of the fan or on the motor housing. There
should be no bends in the power cord to ensure the correct operation of
the appliance.
7. As well as allowing for an oscillating action of cooling, the basket can
be tilted up and down to further direct the airflow. The oscillating action
can be cancelled by pulling up the knob located on the back of the motor
housing. This will stop the fan in the direction desired.
Oscillating knob

Operation of your 23cm Desk Fan
Your new 23cm desk fan has been shipped unassembled to reduce
wasteage of packing material, paper cartons and weight. Please keep
these instructions handy as they outline how to simply and easily assem-
ble the fan.
1. After removing everything from the carton, locate the motor unit and
spin the plastic nut in an anti-clockwise direction to undo (Figure 1).
Figure 1.
2. Locate the rear safety grille and position over the protruding indents.
The safety grille will only fit one way over the protruding indents with the
handle facing up. Replace the plastic nut and tighten, taking care to not
overtighten
3. Position the blades over the metal spindle of the motor. Push down
securely on the fan blade until there is only finger span between the fan
blade and motor assembly (Figure 2).
Plastic nut
securing rear
safety grille
Protruding indents
Figure 2.
4. The safety grille has 3 clips that now need to be lifted to allow the fan to
completely assemble (Figure 3).
Figure 3.
5. Align the top locking clip to the top of the rear safety grille that has
already been secured to the fan motor. Lock the side locking clips in place
and align the bottom hole for a security nut and bolt. Undo the security
lock and bolt and thread the aligned holes in the security tools before
doing up the bolt with a pair of pliers or a similar tool.
Fan Blade
Top locking clip
Side locking
clips