Tennant EC H2O M20 User manual

Module Replacement Kit
KIT NO. 9007882
Models: M20, M30, T20
9007980 Rev. 00 (05--10) Tennant Company www.tennantco.com North America Customer Service: (800) 553--8033 or (763) 513--2850
KIT INSTALLATION INSTRUCTIONS:
Installation Time: 1 hour
TOOLS REQUIRED: Phillips Screwdriver, Pliers
1. Drain the solution and recovery tanks.
2. Park machine on a level surface, turn machine off
and remove key.
3. Remove the defective ec--H2O module from the
machine.
4. Adjust the DIP switches on the new module as
specified below and install module plug.
5. Install new module and check the machine for
proper operation.
Set DIP Switches as shown Top View of Module
ec--H2O Module
ON
SET TO OFF POSITION

Module Replacement Kit
KIT NO. 9007882
Models: M20, M30, T20
9007980 Rev. 00 (05--10) Tennant Company www.tennantco.com North America Customer Service: (800) 553--8033 or (763) 513--2850
KIT INSTALLATION INSTRUCTIONS:
Installation Time: 1 hour
TOOLS REQUIRED: Phillips Screwdriver, Pliers
1. Drain the solution and recovery tanks.
2. Park machine on a level surface, turn machine off
and remove key.
3. Remove the defective ec--H2O module from the
machine.
4. Adjust the DIP switches on the new module as
specified below and install module plug.
5. Install new module and check the machine for
proper operation.
Set DIP Switches as shown Top View of Module
ec--H2O Module
ON
SET TO OFF POSITION