TERK Technologies FDTV2A User manual

FDTV2A
Owner’s Manual
FDTV2A Flat Antenna
Amplified Indoor Television Antenna

FDTV2A
About Your TERK
FDTV2A Flat Antenna
1
Thank you for choosing the TERK FDTV2A. TERK
antennas are designed to deliver sharp, clear
reception of digital signals. At TERK, our engineering
department is dedicated to designing antennas that
enhance both the latest technology and the aesthetics
of any viewing environment. The FDTV2A installs
in minutes and is easy to use. The FDTV2A has a
patented design that lets it receive signals from
360-degrees and work in both the horizontal and
vertical planes, which means it requires virtually no
adjustments once you’ve put it in place.
Before using your antenna, please remove all parts
from the box and read this owner’s manual carefully.
The FDTV2A antenna package includes the following
items:
1 FDTV2A Antenna Pro with Built-In Coaxial Cable
1 Removable Stand
1 Power Adapter
1 Removable In-Line Amplifier with Built-In Coaxial
Cable

FDTV2A
Installing your FDTV2A
antenna
2
Find the best location for the Antenna
Before you connect the antenna, determine the best
spot in your home for optimum reception. Visit
www.antennaweb.org to see where your local
broadcasts are coming from. Then, try as much
as possible to avoid obstructions between these
transmitters and your antenna.
Positioning the Antenna
Once you’ve found the best place to set up your
antenna, you have three options for placing it—you
can lay it flat, hang it on the wall, or stand it upright.
The antenna is designed to perform equally well in all
three positions. For most settings, the recommended
position is standing. However, the best position for
your antenna may vary depending on your location
and setting. Television signal waves bounce off of
objects, causing signal reflections that might cause
the antenna to perform better in one location or
orientation over others. Test the antenna in the
different positions before putting it in its permanent
position.
Please Note: Do not place your FDTV2A near large
metal objects or appliances that could create
interference.

FDTV2A
Installation (continued)
3
Attaching the Stand
The provided stand attaches to the back of the FDTV2A
for standing the antenna upright.
To attach the FDTV2A stand:
1. Line the pegs on the stand with the slots on the
back of the antenna.
2. Insert the pegs in the slots and pull up to lock the
stand into place.

FDTV2A
Installation (continued)
4
Connecting the FDTV2A
You can use the FDTV2A with or without its amplifier,
depending on which connection gives you the
best signal. Using the amplifier provides the best
performance in most situations, so try using it first. If
you notice that you’ve lost channels that you normally
receive, try connecting without the amplifier.
Note: If you find that some channels require the
amplifier while others do not, try unplugging the
power supply for the amplifier for those channels
not requiring amplification.
You can connect the FDTV2A directly to your TV or use
it with a converter box or other tuning device with an
antenna input (such as a cable box or satellite receiver).

FDTV2A
5
FDTV2A Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
Installation (continued)
1. Make sure your TV is turned
off.
2. Connect the FDTV2A’s built-in
cable to the input jack of the
amplifier.
3. Connect the amplifier’s built-
in cable to the antenna input
on your TV.
4. Plug the power adapter into
the amplifier and into an
electrical outlet.
Important: This power adapter
should be plugged in so that it
stays vertical or lays flat.
5. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the FDTV2A with the amplifier directly to
your TV:

FDTV2A
6
Installation (continued)
FDTV2A Built-In
Coaxial Cable
TV
1. Make sure your TV is turned
off.
2. Connect the FDTV2A’s built-in
coaxial cable to the antenna
input on your TV.
3. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the FDTV2A without the amplifier directly
to your TV:
Note about digital channels
To display digital signals on your TV, you’ll need
to have the right equipment: either a TV that is
capable of decoding digital signals or a digital
converter box.

FDTV2A
7
Installation (continued)
Coaxial
Cable
Audio/Video
Cables
Converter Box
FDTV2A Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
–or–
1. Make sure your converter box
is turned off.
2. Connect the FDTV2A’s built-in
cable to the input jack of the
amplifier.
3. Connect the amplifier’s cable
to the antenna input on the
converter box.
4. Follow the directions in the
manual that came with your
converter box to connect it to
your TV.
5. Plug the power adapter into
the amplifier and into an
electrical outlet.
Important: This power adapter
should be plugged in so that it
stays vertical or lays flat.
6. Run your converter box’s setup
routine to scan for available
broadcast channels.
To connect the FDTV2A with the amplifier to a
converter box or other tuning device:

FDTV2A
8
Installation (continued)
FDTV2A Built-In
Coaxial Cable
Coaxial
Cable
Audio/Video
Cables
Converter Box
TV
–or–
1. Make sure your converter box
is turned off.
2. Connect the FDTV2A’s built-in
cable to the antenna input on
the converter box.
3. Follow the directions in the
manual that came with your
converter box to connect it to
your TV.
4. Run your converter box’s
setup routine to scan for
available broadcast channels.
To connect the FDTV2A without the amplifier to a
converter box:

FDTV2A
9
Troubleshooting
I have a cable ready TV. Why am I not getting any channels
above 13?
The tuners inside of cable ready TVs have two modes. One
mode is for cable and the other mode is for antenna. When
the TV is in cable mode, and you are using an antenna, you
will not be able to receive any channels above 13. To fix this,
simply access the menu of your TV and switch the TV from
Cable/CATV mode to ANT/AIR mode.
I have my TV in a metal cabinet. Will the antenna work for me?
Large metal objects may prevent the antenna signal from
reaching the antenna. Try placing the antenna outside of or
above the metal cabinet. If you decide to keep the FDTV2A on
a metal cabinet, use it in the upright position.
My home has aluminum siding/insulation. Where should I
place my antenna?
If you observe poor performance, place the antenna near a
window to minimize interference and improve your reception.
Can I use my antenna in a basement?
TV signals usually cannot penetrate into basement locations
due to their lower elevation.
Please Note: Other variables, which are not related to
antenna performance, can effect your reception. These
include distance from the source transmitting the desired
station, and man-made and natural conditions. Example:
Obstacles such as buildings between the transmitting source
and your antenna.

FDTV2A
10
12 Month Limited Warranty
Audiovox Electronics Corporation (the “Company”) warrants to the original retail
purchaser of this product that should this product or any part thereof, under
normal use and conditions, be proven defective in material or workmanship within
12 months from the date of original purchase, such defect(s) will be repaired or
replaced (at the Company’s option) without charge for parts and repair labor. To
obtain repair or replacement within the terms of this Warranty, the product along
with any accessories included in the original packaging is to be delivered with proof
of warranty coverage (e.g. dated bill of sale), specification of defects(s), transportation
prepaid, to the Company at the address shown below. Do not return this product to
the Retailer.
This Warranty is not transferable and does not cover product purchased, service
or used outside the United States or Canada. The Warranty does not extend to the
elimination of externally generated static or noise. This Warranty does not apply to
costs incurred for installation, removal or reinstallation of the product, or, if in the
Company’s opinion, the product has been damaged through acts of nature, alteration,
improper installation, mishandling, misuse, neglect, or accident. This Warranty does
not cover damage caused by an AC adapter not provided with the product.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED
TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL
THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or
liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDER, INCLUDING ANY IMPLIED WARRANT, MUST BE BROUGHT WITHIN
A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES WHATSOEVER. No person or representative is authorized to assume for
the Company any liability other than expressed herein in connection with the sale of
this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal
rights and you may also have other rights which vary from state/province to state/
province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16,
Mississauga, Ontario L5T 3A5

For Customer Service
Visit Our Website At
www.audiovox.com
Product Information, Photos,
FAQ’s, Owner’s Manuals
For customer service and
technical information::1.800.290.6650
FDTV2A US IB 00