TERK Technologies Trinity Xtend User manual

QUICK START GUIDE
Check out setup videos at
www.TERK.com/Setup TRINITYXTN QSG 01
AMPLIFIED INDOOR HDTV ANTENNA
WITH WIFI EXTENDER

2
3
HD ANTENNA
Setup is easy!
Getting up and running with the Trinity Xtend has two parts.
1 1
Find the best place
for your antenna.
Download the TERK
XTEND App on your
phone.
2Connect the
antenna to your
TV.
Connect to the
Xtend.
2
3Scan for channels. Connect the
Xtend to your
network.
3
HD
HD
HD
NBC
HD
1
WIFI EXTENDER
2

2
3
TV antennas perform best when facing the direction of
the broadcaster’s tower.
For help finding your local broadcast towers, go to www.
TERK.com
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
Place the antenna.
Place the antenna on a flat surface next to your TV, facing the direction where most of
your broadcast towers are located.
Alternate Mounting Option
This antenna can be mounted to a wall as well. To mount this antenna to a wall: Install the included wall-
mount screws (and anchors, if needed) where desired. Align the keyholes on the bottom of the antenna with
wall-mounted screws, then lock the antenna into place.
Setup is easy!
Getting up and running with the Trinity Xtend has two parts.
Find the best location for your antenna.
1
HD ANTENNA SETUP
2

4
5
IMPORTANT: Make sure your TV is turned off.
Raise the five elements to their upright position for
best performance.
For wall-mounting, raise the five antenna elements to their
full 180-degree position.
Raise the antenna’s five elements.
Connect the antenna’s coaxial cable to your TV.
HD ANTENNA SETUP (continued)
Amplifier
TV or
convert
er
box
(back)
ANTENNA
IN
3
Side view
4
5
6

4
5
Plug in the antenna’s power cord to a power outlet.
IMPORTANT: Make sure your TV is turned off.
Raise the five elements to their upright position for
best performance.
Connect the antenna’s coaxial cable to your TV.
Most TVs have a channel scan option in their menu system, many times in a SETUP or
CHANNEL menu under ANTENNA. For detailed instructions on performing a channel
scan, see the owner’s manual that came with your TV.
Scan for channels on your TV.
IMPORTANT: For some channels you might get better performance with the Trinity Xtend antenna in
a different position or facing a different direction. Sometimes just a little bit of adjustment can make a
difference!
HD ANTENNA SETUP (continued)
The Trinity Xtend’s POWER light
illuminates to show that it’s on.
Amplifier
TIP: The AMP / BYPASS switch lets you turn the amplifier for TV signals
on (AMP) or off (BYPASS). Most TV channels will perform better
with this switch left in the AMP position. However, if a channel is not
providing the performance you expect, try watching it with this switch
in the BYPASS position to see if that makes a difference.
5
6

6
7
Direct QR Code Links to the Apps
On the bottom of the TERK XTEND antenna there are 2 QR
codes that take you directly to the XTEND App for your
smartphone’s operating system: one for Android phones and
one for iPhones.
Scan the correct QR code for your type of phone, then
download and install the App.
Download the TERK XTEND App on your phone.
Bottom of the Xtend
WIFI EXTENDER SETUP
1
2
IMPORTANT: The Terk Xtend WiFi Extender can also be set up via web browser. See the
Using Browser-Based Setup section on page 11 for more information.
In the Google Play or Apple App Stores, search for “TERK XTEND” and
look for the icon shown here. Then download and install the App.
Wi-Fi Name (SSID): XTN-000000
Wi-Fi Password: 12345678
iOS Android
IMPORTANT: Screenshots are for illustration
purposes only—your phone’s screens might look
different.

6
7
Wi-Fi Name (SSID): XTN-000000
Wi-Fi Password: 12345678
iOS Android
Download the TERK XTEND App on your phone.
Connect your phone to the Terk Xtend.
Go to the WiFi connections menu on
your phone (in the Settings menu).
Look at the Wi-Fi Name (SSID) listed
on the bottom of the TERK XTEND.
Find that network listed in the list
of WiFi connection options on your
phone. Choose that SSID to connect to
it.
Enter the password listed on the
bottom the Xtend when prompted.
Please note that the password is case-
sensitive.
WIFI EXTENDER SETUP (continued)
2
Bottom of the
Terk Xtend
In the Google Play or Apple App Stores, search for “TERK XTEND” and
look for the icon shown here. Then download and install the App.
iPhone menuAndroid menu
IMPORTANT: Screenshots are for illustration
purposes only—your phone’s screens might look
different.

8
9
WIFI EXTENDER SETUP (continued)
Connect the Terk Xtend to your network.
In the first screen of the TERK
XTEND App, press the Scan button
to start scanning for available
networks.
4
Launch the TERK XTEND App on your phone.
Press on the TERK XTEND App icon to launch the App.
3
iPhone screen Android screen
IMPORTANT: Screenshots are for illustration
purposes only—your phone’s screens might look
different.

8
9
Connect the Terk Xtend to your network.
In the first screen of the TERK
XTEND App, press the Scan button
to start scanning for available
networks.
Find your WiFi network in the list and
select it.
TIP: If your network does not broadcast its SSID,
it will show up in the list as [Hidden]. You can
enter the SSID manually by choosing the HIDDEN
option in the list and typing in the name on the
following screen.
Launch the TERK XTEND App on your phone.
WIFI EXTENDER SETUP (continued)
Enter the password for your WiFi
network when prompted. Then press the
Next button.
IMPORTANT: If you chose [Hidden] from the list
of available networks, enter the name of your
WiFi network in the SSID field on this screen
before you enter your password.
The TERK XTEND App tells you
when the Terk Xtend has successfully
connected to your network. The LINK
indicator on the Terk Xtend illuminates.
iPhone screen Android screen
iPhone screen Android screen

10
11
WIFI EXTENDER SETUP (continued)
The next screen lets you change the name
and password of the Xtend from what’s
listed on the bottom of the Xtend to a
name and password of your choice (like
“upstairs-xtend,” for example). This step is
optional but recommended.
Just tap on each area, delete the old name
and password, and type new ones. Then
press NEXT to continue.
iPhone screen Android screen
iPhone screen Android screen
The final screen of the Xtend setup shows
you the name and password of your
existing Wi-Fi network and the name and
password of the Xtend. You might want to
take a screenshot of this screen for your
records.
Press FINISH when you’re ready to
continue.
The final screen confirms that you’ve
finished setup and closes the App for you.
5

10
11
Using browser-based setup
The Terk Xtend WiFi Extender can also be set up via web browser.
1. In your computer’s WiFi connection menu, choose the Xtend from list of available
connections and enter its password (the Xtend’s SSID and password are listed on the
bottom of the unit).
2. In your web browser, enter the following URL—http://192.168.168.1
3. Follow the directions in the browser-based setup to configure the Xtend with your
network. (If the browser-based setup asks for a user name and password to start setup,
enter admin for the user name and admin for the password.)
WIFI EXTENDER SETUP (continued)
The next screen lets you change the name
and password of the Xtend from what’s
listed on the bottom of the Xtend to a
name and password of your choice (like
“upstairs-xtend,” for example). This step is
optional but recommended.
Just tap on each area, delete the old name
and password, and type new ones. Then
press NEXT to continue.
The final screen of the Xtend setup shows
you the name and password of your
existing Wi-Fi network and the name and
password of the Xtend. You might want to
take a screenshot of this screen for your
records.
Press FINISH when you’re ready to
continue.
The final screen confirms that you’ve
finished setup and closes the App for you.
Connect your devices to the Terk Xtend.
5
Once you’ve finished setup, wait for the Xtend to reboot with its new settings.
When the LINK light on the Xtend’s front panel comes on, go into the WiFi connection
menus of the devices you want to use with the Xtend’s boosted WiFi signal and
choose the Xtend from the list of available devices to connect to. IMPORTANT: You
must connect to the Xtend in order to use it—otherwise, you will still be using your
existing WiFi router and you won’t get the benefits of the boosted signal.

12
13
Amplifier
TOUR OF THE TRINITY XTEND (continued)
POWER indicator illuminates when the Trinity Xtend is
plugged in.
LINK indicator illuminates when the Xtend is linked to
your home network.
ACTIVITY indicator flashes to show that there is WiFi
activity.
RESET button returns the Xtend to its factory default
settings, clearing all of your network information.
Reception elements pick up local television broadcast
and WiFi signals.
Mounting keyholes let you mount the Xtend to a wall
using the supplied mounting hardware.
SSID and password label gives you the information
necessary to set up the Xtend with your WiFi network.
This label also has QR codes for quick access to the
XTEND App for Android or iOS devices.
Top
Bottom
Mounting
keyhole
SSID / password
label
Reception element
TOUR OF THE TRINITY XTEND
iOS Android
SSID: AB1234_YZ
PASS: password1
Web browser link:
http://terkxt1.local

12
13
Amplifier
AMP / BYPASS switch lets you turn the amplifier
for TV signals on (AMP) or off (BYPASS). Most
TV channels will perform better with this switch
left in the AMP position. However, if a channel is
not providing the performance you expect, try
watching it with this switch in the BYPASS position
to see if that makes a difference.
TOUR OF THE TRINITY XTEND (continued)
POWER indicator illuminates when the Trinity Xtend is
plugged in.
LINK indicator illuminates when the Xtend is linked to
your home network.
ACTIVITY indicator flashes to show that there is WiFi
activity.
RESET button returns the Xtend to its factory default
settings, clearing all of your network information.
Reception elements pick up local television broadcast
and WiFi signals.
Mounting keyholes let you mount the Xtend to a wall
using the supplied mounting hardware.
SSID and password label gives you the information
necessary to set up the Xtend with your WiFi network.
This label also has QR codes for quick access to the
XTEND App for Android or iOS devices.
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must
be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in
a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

14
15
WiFi Extender Problems
I don’t have an iPhone or Android phone. How can I set the Trinity Xtend up?
• The Terk Xtend WiFi Extender can also be set up via web browser. See the Using Browser-
Based Setup section on page 9 for more information.
I can’t connect my smartphone to the Trinity Xtend
• Make sure your smartphone has WiFi turned on.
• The Trinity Xtend will appear by its SSID in the list of available networks. Your Xtend’s SSID is
listed on the label on the bottom of the Xtend.
• You must enter the password listed with the SSID on the bottom of the Xtend in order to
connect to the Xtend.
I can’t connect to my WiFi network from the TRINITY XTEND App.
• Press the Scan button on the screen of the App in order to list the available networks in your
area.
• If your network does not broadcast its SSID, it will show up in the list as [Hidden]. You can
enter the SSID manually by choosing the HIDDEN option in the list and typing in the name
on the screen that follows.
TROUBLESHOOTING (continued)
Antenna Reception Problems
I’m having trouble receiving certain channels.
• There are lots of factors that can affect your reception. Tall buildings, mature trees, even
hills between you and the broadcast towers can interfere and change the direction of the
signals you receive. You might still need to make adjustments after you position the antenna
to account for these factors. Any time you change the antenna’s position, make sure you
re-scan for channels on your TV or digital TV converter box. The channels you receive may
have changed.
• Is the antenna sitting on a metal surface (like a metal stand)? Move it to a non-metal surface
(metal interferes with reception).
• Try using the antenna without the amplifier. Move the switch on the Xtend’s amplifier to the
BYPASS position.
• Move the antenna close to a window. Some construction materials (such as aluminum siding)
make it more difficult to get good reception. Re-scan for channels when you’re finished.
• Position the antenna as high as possible. Most of the time, this increases your chances of
reception. Re-scan for channels when you’re finished.
• Make sure you uncoil the antenna’s cable completely. Leaving it coiled will reduce reception
performance.
TROUBLESHOOTING

14
15
WiFi Extender Problems
I don’t have an iPhone or Android phone. How can I set the Trinity Xtend up?
• The Terk Xtend WiFi Extender can also be set up via web browser. See the Using Browser-
Based Setup section on page 9 for more information.
I can’t connect my smartphone to the Trinity Xtend
• Make sure your smartphone has WiFi turned on.
• The Trinity Xtend will appear by its SSID in the list of available networks. Your Xtend’s SSID is
listed on the label on the bottom of the Xtend.
• You must enter the password listed with the SSID on the bottom of the Xtend in order to
connect to the Xtend.
I can’t connect to my WiFi network from the TRINITY XTEND App.
• Press the Scan button on the screen of the App in order to list the available networks in your
area.
• If your network does not broadcast its SSID, it will show up in the list as [Hidden]. You can
enter the SSID manually by choosing the HIDDEN option in the list and typing in the name
on the screen that follows.
TROUBLESHOOTING (continued)
Antenna Reception Problems
I’m having trouble receiving certain channels.
• There are lots of factors that can affect your reception. Tall buildings, mature trees, even
hills between you and the broadcast towers can interfere and change the direction of the
signals you receive. You might still need to make adjustments after you position the antenna
to account for these factors. Any time you change the antenna’s position, make sure you
re-scan for channels on your TV or digital TV converter box. The channels you receive may
have changed.
• Is the antenna sitting on a metal surface (like a metal stand)? Move it to a non-metal surface
(metal interferes with reception).
• Try using the antenna without the amplifier. Move the switch on the Xtend’s amplifier to the
BYPASS position.
• Move the antenna close to a window. Some construction materials (such as aluminum siding)
make it more difficult to get good reception. Re-scan for channels when you’re finished.
• Position the antenna as high as possible. Most of the time, this increases your chances of
reception. Re-scan for channels when you’re finished.
• Make sure you uncoil the antenna’s cable completely. Leaving it coiled will reduce reception
performance.

16
GUÍA DE
INICIO RÁPIDO
Consulte los videos de instalación en
www.TERK.com/Setup
ANTENA INTERIOR HDTV AMPLIFICADA
CON EXTENSOR WIFI
My WiFi coverage and/or performance isn’t as good as I expected.
• Make sure you’re connected to the Trinity Xtend, not directly to your WiFi router. Go to your
WiFi connection settings and find your Xtend’s SSID in the list of available connections (see
the label on the bottom of the Xtend for your unit’s SSID).
• Use the TERK XTEND App to check the strength of the WiFi signal the Xtend is receiving
from your WiFi router. If the signal strength is less than two or three bars, you might need to
move the Terk Xtend and WiFi router closer together.
I can’t reconnect to the Trinity Xtend.
• Make sure you haven’t automatically reconnected directly to your WiFi router. Go to your
WiFi connection settings and find your Xtend’s SSID in the list of available connections (see
the label on the bottom of the Xtend for your unit’s SSID).
I’m having intermittent connection problems.
• Make sure you’re connected to the Trinity Xtend, not directly to your WiFi router. Go to your
WiFi connection settings and find your Xtend’s SSID in the list of available connections (see
the label on the bottom of the Xtend for your unit’s SSID).
• Use the TERK XTEND App to check the strength of the WiFi signal the Xtend is receiving
from your WiFi router. If the signal strength is less than two or three bars, you might need to
move the Terk Xtend and WiFi router closer together.
TROUBLESHOOTING (continued)