Teslong MS450-NTC User manual

MS450-NTC V201910-1
User Manual
Model:MS450-NTC
Digital Inspection Endoscope

01 02
5
6
7
8
4
3
2
1
Camera probe connector.
Snap button: Photo taking/Start video recording/End video recording.
Light control button: To adjust the the LED‘s brightness of the camera.
Up and down selection button/retate180°.
Mode switch button: switch between three function modes:
Photo taking, video recording and playback.
Enter button: Confirm selection/freeze screen.
Settings button: enter/exit settings menu.
Power button: long press to turn on/off .
1
2
3
4
5
6
7
8
Ms450 is a high performance industrial endoscope with a 4.5 inches high
definition color IPS screen. It is ergonomically designed so that the main
functional buttons can be controlled within one hand. The snapshot and recoring
functions are supported, photos and videos can be saved on TF memory card
( Micro-SD card). This product is equipped with a LED-assisted illumination and
small-diameter HD camera, and the camera uses a high-sensitivity chip, so that
the product can be used in dark environments.
The camera probe is interchangeable, it can connect to different probes with
different lengths, diameter, view angles and focal length for using in different
inspection places.
*
*When the product is used in the environment with sharp staff, please be careful
to prevent the probe's waterproof protective layer from being scratched during
usage.
*The camera probe adopts materials which are not resistant to high temperature.
When checking the vehicle engine, please ensure that temperature inside the
engine drops to the normal temperature.
*This product is not suitable for people with limited physical, sensory or mental
capabilities to use it.
*Please do not allow children to touch or operate this device.
*If the device is damaged, do not disassemble it by yourself. Please contact the
seller or the agent where you bought it to get repair service.
Please do not violently hit the camera probe, and do not imprudently pull the cable.
Warning: This product is an industrial endoscope camera and is not intended
for medical use or human examination.
*Please use 5V household charger that meets the safety requlations to charge this
device.
*This device can work while charging.
*If you do not use the device for a long time, please ensure that it is charged at least
once every 3 months to prevent irreparable damage caused by excessive battery
discharge.
Product anualm
Safety and maintenance
Battery description
Functions

01 02
5
6
7
8
4
3
2
1
Camera probe connector.
Snap button: Photo taking/Start video recording/End video recording.
Light control button: To adjust the the LED‘s brightness of the camera.
Up and down selection button/retate180°.
Mode switch button: switch between three function modes:
Photo taking, video recording and playback.
Enter button: Confirm selection/freeze screen.
Settings button: enter/exit settings menu.
Power button: long press to turn on/off .
1
2
3
4
5
6
7
8
Ms450 is a high performance industrial endoscope with a 4.5 inches high
definition color IPS screen. It is ergonomically designed so that the main
functional buttons can be controlled within one hand. The snapshot and recoring
functions are supported, photos and videos can be saved on TF memory card
( Micro-SD card). This product is equipped with a LED-assisted illumination and
small-diameter HD camera, and the camera uses a high-sensitivity chip, so that
the product can be used in dark environments.
The camera probe is interchangeable, it can connect to different probes with
different lengths, diameter, view angles and focal length for using in different
inspection places.
*
*When the product is used in the environment with sharp staff, please be careful
to prevent the probe's waterproof protective layer from being scratched during
usage.
*The camera probe adopts materials which are not resistant to high temperature.
When checking the vehicle engine, please ensure that temperature inside the
engine drops to the normal temperature.
*This product is not suitable for people with limited physical, sensory or mental
capabilities to use it.
*Please do not allow children to touch or operate this device.
*If the device is damaged, do not disassemble it by yourself. Please contact the
seller or the agent where you bought it to get repair service.
Please do not violently hit the camera probe, and do not imprudently pull the cable.
Warning: This product is an industrial endoscope camera and is not intended
for medical use or human examination.
*Please use 5V household charger that meets the safety requlations to charge this
device.
*This device can work while charging.
*If you do not use the device for a long time, please ensure that it is charged at least
once every 3 months to prevent irreparable damage caused by excessive battery
discharge.
Product anualm
Safety and maintenance
Battery description
Functions

03
9
10
11
12
13
14
2019 09-24 08：00-
04
Press this button and pull out the TYPE-C
plug of the probe from the monitor.
Camera probe lock( Press this button to unlock and pull out the
camera probe)
Note:Connect camera probe before
turning on device.Restart device after
replacing camera probe.
Notice: When connecting a dual lens
camera probe, please press this button
to switch the front and side lenses.
10
9
11 12 13
14
15
15
The device is equipped with a TF
memory card(inserted). Gently press
to eject the card.
Long press the power button to turn
on/off device.
TF card slot
Charging port
Speaker
Installation hole of Screen bracket
Reset button
Microphone
Functions
Insert TF card:
*please power off device first before insert TF card.
*please make sure the direction and the front and back sides is correct when
insert the TF card.
*Do not use excessive force when inserting or removing the TF card to prevent
damages of card slot structure.
Mode: Press “M” to switch the three modes:
photo taking/video recording/playback
TF card status: TF card inserted/no card
Date and time: modify the date and time in Settings menu
Instructions

03
9
10
11
12
13
14
2019 09-24 08：00-
04
Press this button and pull out the TYPE-C
plug of the probe from the monitor.
Camera probe lock( Press this button to unlock and pull out the
camera probe)
Note:Connect camera probe before
turning on device.Restart device after
replacing camera probe.
Notice: When connecting a dual lens
camera probe, please press this button
to switch the front and side lenses.
10
9
11 12 13
14
15
15
The device is equipped with a TF
memory card(inserted). Gently press
to eject the card.
Long press the power button to turn
on/off device.
TF card slot
Charging port
Speaker
Installation hole of Screen bracket
Reset button
Microphone
Functions
Insert TF card:
*please power off device first before insert TF card.
*please make sure the direction and the front and back sides is correct when
insert the TF card.
*Do not use excessive force when inserting or removing the TF card to prevent
damages of card slot structure.
Mode: Press “M” to switch the three modes:
photo taking/video recording/playback
TF card status: TF card inserted/no card
Date and time: modify the date and time in Settings menu
Instructions

06
Screen
Camera
Other
Packaging
Screen 4.5’IPS HD Display
Screen resolution（Pixels）854x480
Support probe resolution（Pixels）100W
Snapshot resolution（Pixels）1920x1080，
Video Recording resolution（Pixels）1920x1080，1280x720
Port Type-C charging port,TF memory card slot
Monitor camera probe Type-C charging cable
user manual Screen Bracket
:
:
:
:
:
:
Diameter: 5.5mm or optional
Probe Length: optional
Resolution: 1.0 Megapixel HD
Viewing angle: 70°
Depth of Field: 30mm—100mm
Light Source: 6 adjustable high-intensity LEDs
Operating Temperature: 32° F to 113°F (0° C to 45°C)
Power Source: 2500mAh Lithium Battery
Max battery life: 3~4 hours
Charging time:3~4 hours
, , ,
,
Accessories – pick up hock, magnet, mirror
(3.9mm NO accessories, 8mm NO mirror)
2019 09-2 4 08：0 0- 2019 09-2 4 08：0 0-
05
Please pull out probe camera first before using Type-C cable.
Language settings
The default language is English, and the system supports English, Chinese,
German,French, Spanish, Italian, Russian, and Japanese.
Setting path:
Press the button twice to enter setting page.
Select second item(Language)on settings page.
Press up an d down keys to select the language you need.
Press to save your choice.
Photo taking/Video recording/Playback
Press to switch to the photo taking or
video recording mode, and press to take
a photo or start recording.
Press to switch to playback mode, press
to select photo or video to view,and
press to delete photo or video.
Copy photo and video files to computer
Card reader
or
Type-c data cable
You can use a TF card reader to copy data directly or use a type-C cable to
connect to a computer for copying.
Specification parameters

06
Screen
Camera
Other
Packaging
Screen 4.5’IPS HD Display
Screen resolution（Pixels）854x480
Support probe resolution（Pixels）100W
Snapshot resolution（Pixels）1920x1080，
Video Recording resolution（Pixels）1920x1080，1280x720
Port Type-C charging port,TF memory card slot
Monitor camera probe Type-C charging cable
user manual Screen Bracket
:
:
:
:
:
:
Diameter: 5.5mm or optional
Probe Length: optional
Resolution: 1.0 Megapixel HD
Viewing angle: 70°
Depth of Field: 30mm—100mm
Light Source: 6 adjustable high-intensity LEDs
Operating Temperature: 32° F to 113°F (0° C to 45°C)
Power Source: 2500mAh Lithium Battery
Max battery life: 3~4 hours
Charging time:3~4 hours
, , ,
,
Accessories – pick up hock, magnet, mirror
(3.9mm NO accessories, 8mm NO mirror)
2019 09-2 4 08：0 0- 2019 09-2 4 08：0 0-
05
Please pull out probe camera first before using Type-C cable.
Language settings
The default language is English, and the system supports English, Chinese,
German,French, Spanish, Italian, Russian, and Japanese.
Setting path:
Press the button twice to enter setting page.
Select second item(Language)on settings page.
Press up an d down keys to select the language you need.
Press to save your choice.
Photo taking/Video recording/Playback
Press to switch to the photo taking or
video recording mode, and press to take
a photo or start recording.
Press to switch to playback mode, press
to select photo or video to view,and
press to delete photo or video.
Copy photo and video files to computer
Card reader
or
Type-c data cable
You can use a TF card reader to copy data directly or use a type-C cable to
connect to a computer for copying.
Specification parameters

MS450-NTC V201910-1
User Manual
Model:MS450-NTC
Digital Inspection Endoscope