Texas Instruments SimpleLink CC2650 User manual

Thank you for purchasing the TI
SimpleLink™ Multi-Standard SensorTag
Development Kit
Getting started
Download the SensorTag app from the
Apple App Store or Google Play.
1
Download on the GET IT ON
Pull the tab on the SensorTag battery to power on.
2

Within the app select your SensorTag from the
device list, then select “Sensor View” to see the
sensor’s readings.
3
For more information about SensorTag, visit:
www.ti.com/sensortag
For technical support, visit the TI E2E™ community:
www.ti.com/lprf-forum
Congratulations on receiving your new CC2650SensorTag. This first
version of the CC2650SensorTag is built on pre-RTM material. Though we
do not anticipate any issues, please contact
SensorT[email protected] if an issue arises.