Texecom INS225-3 User manual

User Guide
Premier LCDP/LCDLP
Issue 2
Installation Manual
Premier LCD/P & LCDL/P
INS180-5
Installation Manual
Veritas Excel Keypad
INS165
Installation Manual
Premier Elite Com300/Com2400
INS175-5
Installation Manual
Premier ComISDN
Issue 3
Installation Manual
Premier Elite ComWiFi
INS644
Installation Manual
Premier Elite ComIP
INS273-6
Product Type - CEJ0000
Installation Manual
Premier Elite TTLCom
INS640
User Guide
Touch-Tone Remote Control
INS225-3
Installation Manual
Premier RKP Flush Mount
Issue 1
Installation Manual
Premier Elite OP16
INS186-3
Installation Manual
Premier Elite 8XP
INS179-6
Installation Manual
Premier 8X
INS163-4
Installation Manual
Premier 32XP-W
INS467
Installation Manual
Premier Elite 8XP-W & Premier Elite 32XP-W
INS467-6
Installation Manual
Premier Elite IXP-W
INS538-2
Manual De Instalación
Premier 8XP
Número 1
Installation Manual
Premier LCD/LCDL
INS180-6
PREMIER LCDL/LCDL
INSTALLATION MANUAL
Manual De Instalación
Premier LCD/LCDL
INS210
Installation Manual
USB-Modem
Issue 3
Installation Manual
Speech Dialler/Speech & Text Dialler
Issue 2
Manuel d’Installation
Speech Dialler/Speech & Text Dialler
INS262
www
.texe.com
User Guide
Speech Dialler/Speech & Text Dialler
Issue 2
Manuel de l’Opérateur
Speech Dialler/Speech & Text Dialler
INS263
Installation Manual
Premier Elite RM8 Relay Module
INS191-4

Touch Tone Remote Control User Guide
INS225-3
Introduction
This guide describes the operating procedures for remotely controlling your alarm
system with a touch-tone telephone (this includes mobile and standard telephones).
This feature is only available on the Premier 816 Plus and Premier 832 intruder alarm
control panels.
Operation
Establishing a Connection with your Alarm System
1. From a touch-tone telephone, dial the number of your premises (the same
number that the alarm panel is connected to).
2. Wait until the panel has answered your call. You will hear a series of high-
pitched beeps for the first 4 seconds.
3. Press the [*] key on your telephone when you hear the beeps. The beeps will
stop and you will hear one more beep (this confirms that you are connected with
your alarm system).
4. If you hear a continuous tone after the beeps, then you have either not pressed
the [*] key quick enough or the phone you are using is not a touch-tone
telephone.
Menu [1] - Arm your Alarm System
1. Establish a connection with you alarm system.
2. From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3. Press the [1] key on your telephone. Two high-pitched beeps indicate that your
alarm system has been armed successfully. A low-pitched beep indicates that
the system is already armed or the system cannot be armed due to a fault etc.
4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.
Menu [2] - Disarm your Alarm System
1. Establish a connection with you alarm system.
2. From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3. Press the [2] key on your telephone. A high-pitched beep indicates your alarm
system has been disarmed successfully. No beep indicates that the system is
already disarmed.
4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.

User Guide Touch Tone Remote Control
INS225-3
Menu [3] - Reset your Alarm System
1. Establish a connection with you alarm system.
2. From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3. Press the [3] key on your telephone. You will hear a high-pitched beep and your
alarm system will be reset.
4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.
Menu [5] - Last Alarm
1. Establish a connection with you alarm system.
2. From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3. Press the [5] key on your telephone. The system will play a number of high-
pitched beeps corresponding to the zone that last caused an alarm, e.g., if you
hear 4 high-pitched beeps, then zone 4 was the last zone to cause an alarm.
4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.
Menu [8] - Switch ‘PC Output 1’ On/Off
1. Establish a connection with you alarm system.
2. From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3. Press the [8] key on your telephone. A high-pitched beep indicates that ‘PC
Output 1’ has been switched on. A low-pitched beep indicates that ‘PC Output 1’
has been switched off. Press the [8] key again to toggle the output on or off.
4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.
Menu [9] – Switch ‘PC Output 2’ On/Off
1. Establish a connection with you alarm system.
2. From the touch-tone telephone enter your normal access code, if the code is
accepted you will hear a high-pitched beep.
3. Press the [9] key on your telephone. A high-pitched beep indicates that ‘PC
Output 2’ has been switched on. A low-pitched beep indicates that ‘PC Output 2’
has been switched off. Press the [9] key again to toggle the output on or off.
4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.

Touch Tone Remote Control User Guide
INS225-3
Quick Guide Menu
Texecom Limited, Bradwood Court, St. Crispin Way, Haslingden,
Lancashire BB4 4PW, England.
© Texecom Limited 2015