TEXPro CleanCamp User manual

FIG 1
FIG 2
FIG 3
FIG 4
FIG 1
Take all CleanCamp fire kit accessories
out of the travel bag. Open the safet cloth
completel and la it on the ground shining
side down. The safet cloth provides the
foundation for the campfire. There is a
pillow inside the safet cloth, on which the
wood needs to be piled.
FIG 2
In the paper bag, ou will find sticks of
birch tree for building the campfire. Build
the frame b putting the sticks on the
pillow as shown. Use part of the paper bag
as an accelerant.
FIG 3
Put one stick on top of the frame and light
the fire. Add wood when necessar . Use
birch tree sticks onl (maximum length
15 cm).
FIG 4
If needed the safet cloth can be used as
a windbreak b lifting the edge of the cloth
with a twine (see Fig. 4).

FIG 5
FIG 6
FIG 7
FIG 8
Retailer: Seppo Valavuo
i [email protected]
Manufacturer: TEXpro O
FIG 5
Campfire without windbreak.
FIG 6
After the fire has burned down, ash and
coal will be left on the pillow. Dispose of
the ash and coal according to regulations
(Not compostable!).
MAKE SURE THAT THE FIRE IS
COMPLETELY EXTINGUISHED!
FIG 7
Wrap the pillow inside the safet cloth.
FIG 8
Put the CleanCamp fire kit equipment into
its travel bag. Pillow and safet cloth are
read for the next use.