
MAINTENANCE
1. For best results and longer life, store your stand out of the weather to reduce possible rust problems.
2. BEFORE EACH USE, INSPECT ALL MOUNTING HARDWARE, STAND PARTS, POINTS OF CONNECTION AND YOUR
HAMMOCK FOR INDICATIONS OF TEAR OR DEFECTS, REPLACE ALL WORN PARTS PRIOR TO USE OF YOUR
STAND OR HAMMOCK.
3. Should the painted surface become scratched or chipped, obtain a matching paint and touch up spots where the under-
lying metal is exposed to inhibit rust.
CAUTION AND WARNING
DO NOT allow the connections (where one part inserts into another part) to become loose or less than totally inserted. In-
spect prior to every use, to make certain that one part is fully inserted into the other part.
DO NOT EXCEED THE UGGE TED WEIGHT LIMIT FOR YOUR HAMMOCK/COMBO TAND
QUE TION :
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1
02 or e-mail
[email protected]. This Department is open M–F from 8 a.m.–5 p.m. CST
.
MODEL: CRY TAL BAY™
HAMMOCK/ TAND COMBO
ITEM 14262
MADE IN CHINA
(BR42)10
TEP 3 - Insert the top end joints (C) onto the
bottom frame part (E).
TEP 4 - Attach the hammock to the stand with
the metal suspension rings to the hooks on the
top end joint.
This is what your hammock/stand combo
should look like.
DD
E
E
CC
E