The Handy THMT26EXT User manual

12/12/2017
EXTENSION BAR
For THMT26
Model No: THMT26EXT -- Product No: 1938177001
SAVE THESE INSTRUCTIONS
SPARES & SUPPORT: 01793 333212
Please read & understand this manual, payingattention to the safety instructions, before use.
The manufacturer reserves the right to change the product specification and livery according to
continued product improvements.
Images used are for illustration purposes only
INSTRUCTION MANUAL

CONTENTS
SPECIFICATION
IMPORTANT INFORMATION
GENERAL SAFETY INSTRUCTIONS
OPERATION
GENERAL USE
MAINTENANCE
STORAGE
WARRANTY
Please check that all parts required for the assembly of this machine are included. If for any reason you
believe a part for the assembly is missing or damaged, please contact us.
If you require any assistance with regards to the contents or operation of
your machine, please contact us:
TEL: [phone]
EMAIL: [e-mail]
(MON –FRI 8.00AM TO 5.30PM EXCL. BANK HOLIDAYS)
You can register your machine at www.thehandy.co.uk

SPECIFICATION
The manufacturer reserves the right to change the product specification and livery according to continued
product improvements.
Model
THMT26EXT
Product Number
1938177001
Length
100cm
To be used with:
Hedgecutter & Pruner
IMPORTANT INFORMATION
INTENDED USE
The Multi-Tool Extension Bar is designed solely for use with the Handy 26cc Multi-Tool (THMT26) only in
domestic gardens, with annual use below 50 hours. ONLY TO BE USED WITH HEDGECUTTER & PRUNER
ATTACHMENTS ONLY. This product is not intended for commercial use. Generally acknowledged accident
prevention regulations and enclosed safety instructions must be observed. Only perform work described in
these instructions for use, any other use is incorrect. The manufacturer will not assume responsibility for
damage or injury resulting from such use.
GENERAL SAFETY INSTRUCTIONS
Read and understand the owner’s manual and labels affixed to the product. Learn its application and
limitations as well as the specific potential hazards. Retain these instructions for future reference. The
operator is responsible for following the warnings & instructions in this manual and on the product.
STAY ALERT
Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect
your ability to use it properly. Do not use this machine when you are tired or distracted from the job at hand.
Be aware of what you are doing at all times. Use common sense.
WORKING PLAN
Plan your work schedule and allow plenty of time for rest. Use continuously for around 30-40 minutes per
session and take between 10-20 minutes rest between work sessions. Also try to keep total amount of work
performed in a single day under 2 hours or less.
AVOID DANGEROUS CONDITIONS
Make sure there is adequate surrounding workspace. Cluttered areas invite injuries. Keep your work area clean
with sufficient light. Keep the area around the machine clear of obstructions, grease, oil, rubbish and other
debris which could cause persons to fall onto moving parts.
SAFE TRANSPORTATION
Always carry the machine and attachments with the supplied safety guards. If transporting by vehicle, ensure
is it secured horizontally, with the fuel tank at the lowest point, to prevent turnover, fuel spillage or damage.
INSPECT YOUR MACHINE
Check all bolts, nuts, and screws for tightness before each use, especially those securing guards and drive
mechanisms. Vibration during use, may cause these to loosen. Always check to see that all other tools or
equipment are removed from the working area before turning it on. Replace damaged, missing or failed parts
before using it. Warning labels carry important information. Replace any missing/damaged warning labels.
DRESS PROPERLY
Do not wear loose clothing, gloves, scarfs, neckties or jewellery (rings, wrist watches), which can be caught in
moving parts. Protective gloves and non-skid heavy-duty footwear are highly recommended when working.
Wear a face or dust mask if the operation is dusty. Always wear safety glasses/goggles and/or face shields.
Everyday eyeglasses have only impact resistant lenses; they are not safety glasses/goggles. Wear protective
hair covering to contain long hair, preventing it from getting caught in machinery.
CAUTION HOT
Do not touch hot parts of the machine, burn injuries may occur.

DO NOT SMOKE
Do not smoke when using the machine & caution when handling fuel. We recommend you fuel the machine at
least 3 metres away from where you wish to work, in case any spilt fuel ignites when starting the engine.
AVOID ELECTRICAL SHOCK
Do not operate near underground electrical cables, telephone lines, pipes or hoses.
USE THE SHOULDER STRAP
Always use a shoulder strap when using the machine. Adjust the harness to a comfortable operating position
before starting. Maintain a firm grip on both handles. Keep your clear of the machine cutting area.
DO NOT OVERREACH
Keep proper footing and balance at all times when using the machine. Serious injury could occur if the moving
parts are unintentionally contacted. Do not store anything above or near the machine, where anyone might
stand on the machine to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Keep hands & feet out of the way of all moving parts. Do not place any part of your body or any tool e.g. in the
machine during operation. Do not place any moving parts on the ground during start up.
BLOCKAGES
Do not attempt to remove a blockage from a jammed machine before first switching the engine off.
KICKBACK
The Pruner attachment is supplied with a low KICKBACK chain, however sometimes kick back can occur, so
always hold the unit firmly in two hands. The Kickback danger zone on your Pruner is the upper part of the
nose of the guide bar. Never saw using this part of the guide bar, which poses a significant risk for kickback.
DO NOT FORCE TOOL
Always work within the rated capacity. Do not use machine for a purpose for which it was not intended.
NEVER LEAVE MACHINE RUNNING UNATTENDED
Do not leave the machine unattended until it has come to a complete stop.
MAINTAIN YOUR MACHINE WITH CARE
Clean the machine immediately after use. Keep clean to ensure it operates to its full and safest performance.
When maintaining, only the manufacturer’s original replacement parts. The use of non-original manufacturer
parts may invalidate your warranty.
PROTECT THE ENVIRONMENT
Take left over materials & fluids to an authorised collection point or follow the stipulations in the country
where the machine is used. Do not discharge into drains, soil or water.
STORE IDLE EQUIPMENT
When not in use, the machine should be stored in a dry location. Keep the machine away from children and
others not qualified to use it.
SAFETY SYMBOLS
Safety alert symbol. Used to alert you to potential
personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury.
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in serious injury.
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in serious injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury.
CAUTION
Used without the safety alert symbol indicates a
potentially hazardous situation which, if not
avoided, may result in property damage.