The Land of Nod Dollhouse bookcase User manual

DOLLHOUSE
BOOKCASE
Made in Vietnam - r05 Page 1 of 5
HARDWARE
COMPONENTS
TOOLS REQUIRED
Thank you for purchasing the Dollhouse Bookcase.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
22 - wood
dowels
2 - side panels
(1 left, 1 right) 1 - middle shelf1 - top shelf
1 - bottom panel 1 - small partition1 - large partition
2 - roof panels 1 - bottom back panel 1 - top back panel1 - middle back panel
30 - large
bolts
16 - small
screws
30 - flat
washers
30 - spring
washers
WARNING: Adult Assembly Required
!
Missing hardware? Please call 800.933.9904 for replacements.
NOTE: Contains small parts. To avoid danger keep away from
small children.
1 - medium partition

DOLLHOUSE
BOOKCASE
Made in Vietnam - r06 Page 2 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
3
12
4
A) Insert 2 wood dowels into middle shelf as
shown.
B) Attach 1 large partition to middle shelf with 2
large bolts, 2 spring washers and 2 flat washers
as shown. Secure, but do not over tighten, bolts
with a phillips head screwdriver.
top shelf
assembly
A) Insert 8 wood dowels into left and right
side panels as shown.
B) Attach shelf assembly to each side panel
with 8 bolts, 8 spring washers and 8 flat
washers as shown.
A) Insert 2 wood dowels into top shelf as shown.
B) Attach 1 medium partition to top shelf with 2
large bolts, 2 spring washers and 2 flat washers
as shown.
A) Insert 2 wood dowels into partition of top shelf
assembly as shown.
B) Attach middle shelf assembly with 2 large bolts,
2 spring washers and 2 flat washers as shown.
NOTE: Make sure ledge of
partition is facing right side
of shelf as shown.
NOTE: Make sure ledge of
partition is facing right side
of shelf as shown.
NOTE: Middle shelf
has pilot holes on
the right side
NOTE: Top shelf
has pilot holes on
the left side
middle
shelf
assembly
medium
partition
large
partition
A
B
A
B
A
B
AB

DOLLHOUSE
BOOKCASE
Made in Vietnam - r06 Page 3 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
7
56
8
A) Insert 6 wood dowels into shelf assembly as
shown.
B) Fit dowels of assembly into corresponding holes
of bottom panel and secure with 6 large bolts, 6
spring washers and 6 flat washers.
With the assistance of another adult, attach
roof assembly onto shelf assembly with 6 large
bolts,6spring washers and 6 flat washers as
shown.
A) With the assistance of another adult, position
unit upright. Insert 2 wood dowels into small
partition as shown.
B) Fit dowels of partition into corresponding holes
of assembly and secure with 2 large bolts, 2
spring washers and 2 flat washers as shown.
Fit pre-assembled dowels of roof panel into
corresponding holes of remaining roof panel, and
secure with 2 large bolts, 2 spring washers and 2
flat washers as shown.
A
B
A
B
NOTE: Make sure
angled edge of partition
is facing towards the right
small
partition

DOLLHOUSE
BOOKCASE
Made in Vietnam - r06 Page 4 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
11
910
Attach top back panel to assembly with 6 small
screws as shown. Secure, but do not over tighten,
screws with a screwdriver.
Attach middle back panel to assembly with 3
small screws as shown.
Attach bottom back panel to assembly with 7
small screws as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished
with a protective clear lacquer.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach mounting bracket to top of unit using 2 small screws.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the mounting bracket mounted to
the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than
the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.
D) Attach the mounting bracket to the wall by inserting 2 large screws through the mounting bracket and into the wall
anchor in the wall.
E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of the wall strap through both brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat step A-G for remaining wall mounting assembly.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified
professional.
Wall mounting assembly is now complete.
DOLLHOUSE
BOOKCASE
Made in Vietnam - r06 Page 5 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
Serious or fatal crushing injuries can occur from furniture
tip over. Use of tip-over restraints may only reduce, but
not eliminate, the risk of tip-over. To help prevent tip-over,
install tip restraint per instructions below.
WARNING
!
4 - small
screws
4 - large
screws
4 - plastic
anchors
4 - mounting
brackets
Missing hardware? Please call 800.933.9904
for replacements. NOTE: Contains small
parts. Keep away from small children.
MOUNTING HARDWARE
2 - wall straps
TOOLS REQUIRED
WALL MOUNTING ASSEMBLY
power drill
(for pilot holes only)
phillips head screwdriver