Knight Cubit Credenza User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Cubit Credenza

Assembly Instructions
knightgroup.co.nz
Assembly Instructions
Cubit Credenza
Recommended
2 Person Assembly
Thank you for purchasing Knight product, please carefully read the assembly manual and direction for use prior to installment, use
and maintenance of the product to gain a complete understanding of its contents. It provides you with important information
about the safety, use, installation and maintenance of the product.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING
THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby.
• Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
• Don’t put high-temperature or frozen objects on furniture.
• Safely carry product to location of assembly.
• Retain this operation manual & pass it on to any future owner.
SET UP AND INSTALLATION
• Assemble the product according to the assembly instructions.
• To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
• Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product
and we apologise in advance.

Assembly Instructions
knightgroup.co.nz
Assembly Instructions
Cubit Credenza
Parts
Item Description Quantity
ATop Panel 1
XLeft Side Panel 1
ZRight Side Panel 1
DBack Panel 1
GBottom Panel 1
EMoveable Shelf 2
YVertical Panel 1
V1 Door Panel 1
V2 Door Panel 1
V3 Door Panel 1
V4 Door Panel 1

Assembly Instructions
knightgroup.co.nz
Cubit Credenza
Item Description Quantity
c1 6x35 Cam Bolt 24
d1 8x30 Dowel Pin 24
c2 Cam Sticker 24
p1 Threaded Dowel Pin 8
s1 4x16 Screw 40
m2 Metal Leg 6
k1 Lock Catch 2
k4 Lock 2
k5 Lock Catch 2
h4 Handle 4
s7 4x22 Fix Bolt 8
g2 Big Curve Hinge &
Mount Plate 4
g3 Small Curve Hinge &
Mount Plate 4
g1 Hinge Stand 8
s13 4x25 Screw 18
IMPORTANT:
Please note the difference between
parts g2 and g3.
Each hinge is specifically designed for
their unique position.
Correct installation is essential for a
successful assembly of this credenza.
Parts
c1 6x35 Cam Bolt
s13 4x25 Screw
g1 Hinge Stand
d1 8x30 Dowel Pin
k4 Lock
g2 Big Curve Hinge &
Mount Plate
(V1 and V4)
c2 Cam Sticker
k1 Lock Catch
g3 Small Curve Hinge
& Mount Plate
(V2 and V3)
s1 4x16 Screw
k5 Lock Catch
p1 Threaded Dowel Pin
s7 4x22 Fix Bolt
m2 Metal Leg
h4 Handle
Cam
(pre-installed)

Page 1
Assembly Instructions
knightgroup.co.nz
Step 1
Page 1
Assembly Instructions
Preparation for top panel A, bottom panel G, left side panel X, right side panel Z, vertical panel Y, door
panel V1, V2, V3 & V4. Please note g1 is supplied assembled on g2 & g3, g1 will need to be disassembled
from g2 & g3 to complete the below assembly.
Cubit Credenza
IMPORTANT:
Please note the difference between
parts g2 and g3.
Each hinge is specifically designed for
their unique position.
Correct installation is essential for a
successful assembly of this credenza.
1. Insert cams bolts (c1) and dowel pins (d1) into panels A, G, X and Z as illustrated above.
2. Fix hinge stands (g1) to panels X, Z and Y with screws (s1) as illustrated above.
3. Fix hinge bodies (g2) to panels V1 and V4 with screws (s1) as illustrated above.
4. Fix hinge bodies (g3) to panels V2 and V3 with screws (s1) as illustrated above.
5. Fix handle (h4) to panels V1, V2, V3 and V4 with fix bolts (s7) as illustrated above.
6. Fix metal leg (m2) to panel G with screws (s13) as illustrated above.
s1
s1
s7
s1
s1
s1
m2
s13
c1
d1
g1
g2
g2
g3
g3

Page 2
Assembly Instructions
knightgroup.co.nz
Page 2
Assembly Instructions
Step 1a
Installation of lock and lock catches on door panels V1, V2, V3, V4 and top panel A.
7. Fix lock (k4) to panel V2 and V4 with screws (s1) as illustrated above.
8. Fix lock catch (k5) to panel V1 and V3 with screws (s1) as illustrated above .
9. Fix lock catch (k1) to panel A with screws (s1) as illustrated above.
Cubit Credenza
s1
k1
k5
k4
k4
k5
s1
s1
s1
s1

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Step 2
Cubit Credenza
Top panel A, back panel D, left side panel X, right side panel Z, vertical panel Y assembly.
1. Fix cams on panel X, Z, Y, D into cam bolts (c1) on panel A and tighten in a clockwise direction as
illustrated above.
Cams/Holes on the panel
Y should face to panel X.

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Insert threaded dowel pins (p1) in to panels X, Z and Y as desired shelf height. Put the two panels E on the top of
threaded dowel pins (p1) as illustrated.
Step 4
Fix cams on panel X, Y, Z and D into cam bolts (c1) on panel G and tighten in a clockwise direction as illustrated.
Use cam stickers (c2) to cover the top of all the cams.
Step 3
Cubit Credenza

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 5
Door panel V1, V2, V3 and V4 assembly.
Cubit Credenza

Page 6
Assembly Instructions
knightgroup.co.nz
Page 6
Assembly Instructions
Complete
Cubit Credenza