THE WORLD MODELS Sky Runner User manual

Wing Span 49 in/1240 mm
Wing Area
Flying Weight
Fuselage Length
23 oz/6 g.7 70
336 sq in/21 sq dm.7
33 in/835 mm
*Specifications are subject to change without notice.*
Specifications
Speed 400 motor
Requires: 4 channel radio w/4 micro servos
15A speed controller and 8 cells 1000 mAh battery .
INSTRUCTION MANUAL
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF) SERIES
MADE IN CHINA
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.1
P. 3 -9
Do not overlook this symbol!
Cut off shaded portion.
Peel off shaded portion
covering film.
Pay close attention here!
Pierce the shaded portion
covering film.
Must be purchased separately!
Drill holes with the specified
diameter (here: 3mm).
3mm
INDEX
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P. 1
P. 2
P.9
BEFORE YOU BEGIN
Read through the manual before you begin, so you will have an overall idea of what to do.
Symbols used throughout this instruction manual comprise of the following : -
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Assemble left and right
sides the same way.
Apply epoxy glue.
1
2
3
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement. The
manufacturer will replace any defective parts, but will not extend to the parts that are good before
gluing to defective parts during assembly. Warranty will not cover any parts modified by customer .
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.2
Parts list
LIGHTEX SGX
LIGHTEX SGX 100 WHITE
LIGHTEX SGX 250 BLUE
LIGHTEX SGX 312 BRIGHT RED
LIGHTEX SGX 330 CADMIUM YELLOW
LIGHTEX SGX 331 CUB YELLOW
050 TRANSPARENT BLUE
COVERING:--
8. FUEL TUBE d2xD4x4mm--2 pcs
STRAPER--2 pcs
SPONGE(For Radio Equipment)10x50x150mm--1 pc.
DOUBLE-SIDED
TAPE 30x35mm--1pc.
BATTERY TIE--1pc.
9. NYLON BOLT M2.5x16mm--2pcs
NYLON WASHER d2.6xD9mm--2pcs
PLASTIC PLATE 0.8x20x42mm(Wing Protection)--1pc.
10. CANOPY--1set
11. D ECALS--1set
1. MAIN WING -- 1 pc.
WING JOINER 4.5x109mm--1 pc.
2. SCREW PM2x12mm--4 pcs
STRAPER--2 pcs
FUEL TUBE d2xD4x4mm--4 pcs
CLEVIS--2 pcs
HORN--2 sets
PUSHROD 1.4x72mm w/Threads(For Aileron Servo)--2 pcs
3. STABILIZER & ELEVATOR--1 set
FUSELAGE--1 pc.
BAMBOO Ø3 x 10 mm -- 1 pc.
4. VERTICAL FIN & RUDDER--1 set
5. SCREW PM2x8mm--2 pcs
CLEVIS--1 pc.
FUEL TUBE d2xD4x4mm--1 pc.
HORN--1 set
PUSHROD 1.4x500mm w/Threads(For Elevator Servo)--1 pc.
6. SCREW PM2x10mm--
2 pcs
CLEVIS--1 pc.
FUEL TUBE d2xD4x4mm--1 pc.
HORN--1 set
PUSHROD 1.4x445mm w/Threads(For Rudder Servo)--1 pc.
7. SPEED 400 MOTOR--1 set
GEARBOX--1 set
SPINNER 36--1 set
FOLDING PROPELLER SET --1 set
COWLING--1 pc.
SCREW PWA2x8mm--4 pcs
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

Main Wing
P.3
1
Aileron Servos
2
4
PM2x12mm Screw
Ø1mm pilot holes for World
Models tri-horn are pre-drilled.
Please look for pin-hole marks
at under side of control surfaces.
2mm
Bottom View
PM2x12mm
Pushrod
Clevis
Horn
Fuel Tube
d2xD4X4mm
straper
1mm
Ø1.4x72mm
2mm
Completed
Apply instant type CA glue to both sides of each hinge.
Wing Joiner
Ø4.5 x 109mm
Aileron Servo Lead
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

Completed
P.4
Vertical Fin & Rudder
4
Apply ins tant type CA glue to both
sides of each hing e.
B=B'
BB
Peel off shaded Portion
covering film.
Stabilizer & Elevator
3
A=A
A
A
(Stabilizer)
(Main Wing)
BB'
Te m p o r a r y i n s t a l l t h e m a i n w i n g , a d j u s t
l e v e l i n g o f t h e s t a b i l i z e r t o m a k e i t a s
p a r a l l e l t o t h e m a i n w i n g a s p o s s i b l e .
Apply instant type CA glue to both sid es of each hinge.
Completed
BAMBOO
Ø3x10mm
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.5
Elevator Pushrod
PM2 x 8mm Screw
2
PM2 x 8mm
2mm
PM2 x 8mm
Pushrod
1.4 x 500mm
Fuel Tube
d2xD4x4mm
Clevis
Horn
2mm
7
PM2 x 10mm Screw
2
Ø1mm pilot holes for World Models tri-horn are pre-drilled.
Please look for pin-hole marks at side of control surfaces.
7
Rudder Pushrod
6
6mm
110mm
Bottom View
PM2 x 10mm
Clevis
Horn
2mm
Pushrod
1.4 x 445mm
Fuel Tube
86mm
10mm
d2xD4x4mm
Pushrod
1.4 x 445mm
Pushrod
1.4 x 500mm
5
Ø1mm p ilot hol es fo r World Mode ls tr i-ho rn ar e
pre- dril led. Plea se look for pi n-hole ma rks a t
unde r sid e of cont rol s urfa ces.
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

7
1
23
45
Motor / Cowling Setting
P.6
1.2x35mm
7
8
PA2.6 x 10mm
PWA2 x 8mm
Spinner
3mm Set Screw
PWA2 x 8mm Screw
4
2
M2.6x7mm Screw
1
3mm Set Screw
PM2 x 12mm Screw
4
2
PA2.6 x 10mm Screw
1 m m
TO ALLOW FOR
BACKLASH OF
MATCHING GEAR,
PUT A PIECE OF
THIN PAPER
BETWEEN THE
GEARS AND
THEN TIGHTEN
THE M2.6x7mm
SCREWS. REMOVE
THE PAPER
BEFORE FLYING.
PM2 x 12mm
6
PM2 x 12mm
M2 Nut
2
d2 x D5mm Washer
2
d2 x D5mm
PM2 x 12mm
M2 Nut
M2.6 x 7mm
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.7
C a nopy
Radio Equipment
Rudder Servo
Rudder Pushrod
Straper
Elevator Pushrod Elevator Servo Battery Tie
Install and arrange the servo as shown in the diagram.
Receiver Sponge
15A Speed Controller
Speed 400 Motor
Double-Sided Tape
Completed
Battery
Fuel Tube
Ø4x4mm
8
10
Nylon Bolt M2.5x16mm
2
2
Nylon Washer d2.6xD9mm
Peel off shaded portion covering film.
Nylon Bolt
M2.5x16mm
Nylon Washer
d2.6xD9mm
Wing Protection
0.8 x 20 x 42mm
2.5mm
M2.5x16mm
d2.6xD9mm
Main Wing
9
Bottom View
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

AA'
P.8
Wing Setting
11
Adjust the wing and fuselage configuration as shown in the diagrams.
A=A' B=B' C=C'
BB' C'C
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

P.9
Important Safety Precautions
#First time flyer should never fly by himself/herself. Assistance from experienced flyer is
absolutely necessary.
#Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
# is specially designed to be powered by speed 400 geared motor.
#Make sure the air field is spacious, never fly the plane too close to people and never get
too close to a running propeller.
#If you find wrinkles on the covering as a result of weather changes, you can use hot iron
to remove the wrinkles. Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone. Too hot an iron may damage the covering.
#Check and re-tighten up all factory assembled screws, use thread locker if applicable.
Warning!
P.9
C.G.
13
The ideal C.G. position is 52mm (2.0 in.) behind
the leading edge measured at where the wing
meets the fuselage. In order to obtain the C.G.
Specified, add weight to the fuselage or move
the battery position. Check the C.G. Before
flying.
E2400606
Control Throws
25mm
25mm
12
6mm
Aileron
6mm
6mm
6mm
Rudder
Elevator
52mm
C.G.
2.0 in.
Adjust the control throws as shown in the
diagram. These throws are good for general
flying. You can adjust according to your
personal preference.
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
1.Name:
2.Address:
3.Phone #: e-mail:
4.Model:
Wing QC# Fuselage QC#
(QC numbers are stamped on wing and fuselage)
5.Date of Purchase:
6.Store Name:
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
Air Borne Models, 2403, Research Drive, Livermore, CA 94550.U.S.A.
P.10
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com

The World Models
Manufacturing Co., LTD.
www.theworldmode ls.com
E2400606
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.co m
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com