THE WORLD MODELS 1/4 Piper J-3 Cub User manual

Requires : 0.91 cu. in. displacement 2-stroke
1.20 - 1.60 cu. in. displacement 4-stroke
4-channel radio w/ 4 high torque servos
and 1 standard servo(throttle)
Wing Span
Wing Area
Flying Weight
Fuselage Length
104.0 in / 2640 mm
1586 sq in / 102.3 sq dm
14.0-16.0 lbs / 6400-7300 g
65.0 in / 1650 mm
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF)SERIES
MADE IN CHINA
* Specifications are subject to change without notice.*
Warning ! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
INSTRUCTION MANUAL
Specifications
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e l s .com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m ode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

INDEX
BEFORE YOU BEGIN
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P.1
P.2
P.3-P.13
P.13
Check all parts. If you find any defective or missing parts contact your local dealer. Please
DRY FIT and check for defects for all parts that will require CA or Epoxy for final assembly.
Any parts you find to be defective after the gluing process may be difficult to remove for
warranty replacement. The manufacturer will replace any defective parts, but will not extend
to the parts that are good before gluing to defective parts during assembly. Warranty will
not cover any parts modified by customer.
Symbols used throughout this instruction manual comprise of the following :-
Read through the manual before you begin, so you will have an overall idea of what to do.
1
2
3
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Assemble left and right
sides the same way.
Peel off shaded portion
covering film.
Pay close attention here!
Apply epoxy glue.
Must be purchased separately !
Drill holes with the specified
diameter (here: 3mm).
Pierce the shaded portion
covering film.
3mm
Do not overlook this symbol !
Warning!
Apply thread locker
P.1
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m o d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
A053PO28891307

Parts List
COVERING:--
TOUGHLON STL 331 CUB YELLOW
TOUGHLON STL 201 BLACK
P.2
1. MAIN WING -- 1 pair
2. PUSHROD Ø1.8x120mm w/ Threads(For Aileron Servo) -- 2 pcs
FUEL TUBE Ø6x5mm -- 4 pcs
STRAPER PL4112102 -- 2 pcs
SCREW PB2x30mm -- 6 pcs
SCREW PWA2x8mm -- 8 pcs
SERVO MOUNTING PANEL PL5310000 -- 1 pair
CLEVIS PL4112103 -- 2 pcs
TRI-HORN M3x22mm(L) -- 2 sets
3. SOCKET HEAD SCREW M3x15mm -- 12 pcs
WASHER d3xD7mm -- 8 pcs
M3 NUT -- 4 pcs
MAIN WING STRUTS -- 1 set
WING STRUT WIRE Ø3x143x208mm -- 2 pcs
WIRE BRACKET Ø3mm PL5330030Y -- 8 pcs
4. FUSELAGE -- 1 pc.
FUEL TANK 450cc -- 1 set
CABLE TIE(For Fuel Tank) 1.5x5x400mm -- 1 pc.
DOUBLE-SIDED TAPE 40x100mm -- 1pc.
5. ENGINE MOUNT PL5111080 -- 1 set
SOCKET HEAD SCREW M4x30mm -- 4 pcs
WASHER d4.2xD14.5mm -- 4 pcs
M4 BLIND NUT -- 4 pcs
6. ALUMINUM PLATE(For Engine Mount) -- 1 pc.
ANTI-VIBRATION MOUNT PL5214094 -- 1 set
INCLUDE: SOCKET HEAD SCREW M4x35mm -- 4 pcs
SCERW KM3x20mm -- 8 pcs
WASHER d4xD12mm -- 8 pcs
NYLON INSERT LOCK NUT M3 -- 8 pcs
NYLON INSERT LOCK NUT M4 – 4 pcs
THROTTLE PUSHWIRE Ø1.2x480mm -- 1 pc.
PLASTIC TUBE d2xD3x300mm -- 1 pc.
7. SCREW PWA2.6x12mm -- 4 pcs
SILICON GROMMET d1.5xD6.5mm(For Cowling) -- 4 pcs
DUMMY ENGINE COVER -- 1 pair
COWLING -- 1 pc.
TRANSPARENT 3D TEMPLATE -- 1 pc.
8. SCREW PA3x12mm -- 2 pcs
SOCKET HEAD SCREW M3x13mm -- 2 pcs
WASHER d3xD7mm -- 2 pcs
ALUMINUM PLATE 2mm -- 2 pcs
9. MAIN LANDING GEAR -- 1 set
SCREW PA3x12mm -- 12 pcs
WASHER d3xD7mm -- 12 pcs
MOUNTING PLATE 12x20mm -- 6 pcs
10. SCREW PA1.7x8mm -- 6 pcs
SCREW PM3x13mm -- 8 pcs
WASHER d3xD7mm -- 16 pcs
M3 NUT -- 8 pcs
COLLAR Ø4.6mm w/ set screw -- 4 sets
MAIN WHEEL(CUB) Ø107mm -- 2 sets
PLYWOOD 3x145x171mm(Main Landing Gear Cover) -- 1 pair
WIRE BRACKET Ø5mm PL5330050Y -- 8 pcs
11. STABILZER & ELEVATOR -- 1 set
12. VERTICAL FIN & RUDDER -- 1 set
13. TAIL GEAR ASSEMBLY 11-22LBS PL3410021 -- 1 set
SCREW PA3x14mm -- 3 pcs
SCREW PWA2x12mm -- 3 pcs
ALUMINIUM PLATE(For Staying on Tail Fuselage Bottom) 1.5x10x34mm -- 1 pc.
14. FLYING WIRE Ø1x1300mm -- 1 pc.
FLYING WIRE BRACKET -- 6 pcs
FLYING WIRE BRACKET CLEVIS -- 4 pcs
EYE SCREW M1.8x6x12mm -- 4 pcs
SCREW PM2x16mm -- 6 pcs
SCREW PM2x8mm -- 4 pcs
M2 NUT -- 6 pcs
WASHER d2xD5mm -- 6 pcs
COPPER TUBE d2.5xD3.2x8mm (For Rudder) -- 8 pcs
15. SCREW PB2x16mm -- 3 pcs
FUEL TUBE Ø6x5mm -- 1 pc.
CLEVIS PL4112103 -- 1 pc.
TRI-HORN M3x22mm(L) -- 1 set
PUSHROD Ø1.8x1065mm w/ Threads(For Rudder Servo) -- 1 pc.
16. SCREW PB2x16mm -- 6 pcs
FUEL TUBE Ø6x5mm -- 2 pcs
CLEVIS PL4112103 -- 2 pcs
TRI-HORN M3x22mm(L) -- 2 sets
PUSHROD Ø1.8x995mm w/ Threads(For Elevator Servo) -- 2 pcs
17. LINKAGE CONNECTOR Ø2.1mm -- 1 set
18. PLYWOOD 3x152x218mm(For Fuselage Servo) -- 1 pc
19. FUEL TUBE Ø6x5mm -- 2 pcs
STRAPER PL4112102 -- 2 pcs
PUSHROD Ø1.8x85mm(For Elevator) -- 1 pc.
PUSHROD CONNECTOR 4x9x20mm -- 1 set
SPONGE 10x80x200mm -- 2 pcs
20. SCREW PWA2x12mm -- 4 pcs
PILOT PC001102A -- 1 set
SIDE WINDOWS -- 1 pair
COCKPIT BASE PANEL 3x145x165mm -- 2 pcs
21. SCREW PWA2.3x12mm -- 10 pcs
SILICON GROMMET d1.5xD6.5mm(For Wind Shield) -- 4 pcs
WIND SHIELD -- 1 pc.
22. WING TUBE Ø16x661mm -- 2 pcs
SELF-TIGHTENING LATCHING PIN PL9120010 -- 4 pcs
WIRE Ø0.8mm -- 4 pcs
M3x8mm SET SCREW -- 4 pcs
23. SOCKET HEAD SCREW M3x8mm -- 2 pcs
WASHER d3xD7mm -- 4 pcs
M3 NYLON INSERT LOCK NUT -- 2 pcs
24. DECALS: A053DEC -- 1 set
The World Models
Manufacturing Co., Ltd.
www.theworldmod e l s .com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

P.3
Main Wing
1
Aileron Servo
2Ø1mm pilot holes for World Models tri-horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
Bottom View
6
PB2x30mm Screw
8
PWA2x8mm Screw
Bottom View
PWA2x8mm
Aileron Servo Lead
TWM PL8210010
CLEVIS WRENCH
Straper Fuel Tube
6x5mm
Ø
PWA 2 x 8mm
1mm
1.5mm
Pre-glued
Tri-Horn
M3x22mm
Fuel Tube
Ø6x5mm
Clevis
PB2x30mm
Pushrod Ø1.8x120mm
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworld m odels.com
A053PO28891307

P.4
Main Wing3
d3xD7mm Washer
202mm
(7.95in.) 193mm
(7.59in.)
69mm
(2.72in.)
380mm
(14.96in.)
369mm
(14.52in.)
12
8
4
1
Fuel Tank4
3
Cable Tie (For Fuel Tank)
1.5x5x400mm
Completed
FuelTank
450cc
UP Double-sided Tape 40x100mm
Double-sided Tape 40x100mm
Cable Tie
(For Fuel Tank)
1.5x5x400mm
2
M3 Nylon Insert Lock Nut
Bottom View
Main Wing Strut
d3xD7mm Washer
M3x15mm d3xD7mm
Washer
M3 Nylon Insert Lock Nut M3x15mm
3mm
M3x15mm Socket Head Screw
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

P.5
6Engine
Throttle Pushwire
Ø1.2x480mm
Plastic Tube d2xD3x300mm
147mm
5.79 in.
Installed Engine Position
d4xD12mm Washer
M4 NYLON INSERT LOCK NUT
KM3x20mm Screw
8
4
M4x35mm
Socket Head Screw
M4x35mm
Socket Head Screw
d4xD12mm Washer
d4xD12mm
Washer
84
8
M3 NYLON
INSERT LOCK Nut
M4 NYLON
INSERT LOCK Nut
Copper Tubed4.1xD5x67.2mm
1
2
Make sure the rounded
edges are facing the
shock absorbing
SILICON PAD.
KM3x20mm
Copper Tube
d3.1xD4x7.2mm
M3 Nylon Insert
Lock Nut
ANTI-VIBRATION MOUNT INSTALLATION
M4 Nylon Insert
Lock Nut
d4xD12mm
Washer
d4xD12mm
Washer
M4x35mm
Socket Head
Screw
Engine Mount
5
Engine Mount
PL5111080
Washer
d4.2xD14.5mm
d4.2xD14.5mm Washer
M4 Blind Nut
4
4
4
M4x30mm
Socket Head Screw
Socket Head Screw
M4x30mm
5.5mm
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworld m odels.com
A053PO28891307

P.6
Main Landing Gear
Wing Struts Mounting Bracket8
PA3x12mm Screw
d3xD7mm Washer
2
2
2
Wa sh e r
d3xD7 mm
Alumi n u m Pl ate 2mm
PA3x12mm
Wa sh e r
d3xD7 mm
M3x14mm
PA3x12mm Screw
d3xD7mm Washer
12
12
PA3x12mm
Washer
d3xD7mm
Botto m View
Botto m View
Cowling
7
PWA2.6x12mm Screw
d1.5xD6.5mm
Silicon Grommet
4
4
1mm
2.5mm
PWA2.6x12mm
PWA2.6x12mm
1mm
2.5mm
Please refer to the attached sheet for usage of the transparent 3D template.
First insert the grommet to the cowling then apply screw.
9
1mm
2.5mm
1mm
2.5mm
PWA2.6x12mm
d1.5xD6.5mm
Silicon Grommet
Cowling
1.5mm
1.5mm
1.5mm
1.5mm
M3x14mm Socket Head Screw
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworld m odels.com
A053PO28891307

P.7
C = C'
CC'
C=C
CC
Pre-glued
Temporary install the main wing, adjust
leveling of the stabilizer to make it as
parallel to the main wing as possible.
PA1.7x8mm Screw
PA1.7x8mm
PM3x13mm Screw
PM3x13mm
d3xD7mm Washer
Washer
d3xD7mm
M3 Nut
M3 Nut
3mm Set Screw
4.6mm Wheel Collar
6
8
16
8
4
4
3.1mm
3.1mm
Wire Bracket
Bottom View
3.1mm
3.1mm
Vertical Fin / Rudder12
Stabilizer & Elevator11
Main Landing Gear10
(Stabilizer)
(Main Wing)
B B'
B=B '
A = A'
A A'
PM3x13mm
Washer
d3xD7mm
Pre-glued
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com
A053PO28891307

P.8
PB2x16mm Screw
Bottom View
3
Pushrod
Ø1. 8x1065mm
Ø1mm pilot holes for The World Models tri-horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
Fu el Tub e
Ø6x5m m
Cl evi s
Tri- ho r n
M3x22mm
PB2x16mm
M3 Nu t
d3xD7m m Was h er
PM3x 18m m
d3xD7m m Was h er
D2. 6m m
d2. 5x D3. 2x 8m m
x mm
Set Sc r
Copper Tube
Press down the center
1/3 portion
3mm
3mm
PM3x18mm Screw
d3xD7mm Washer
M3 Nt
3
6
3
3mm
3mm
TWM PL8210010
CLEVIS WRENCH
PM2x16mm Screw
6
4
PM2x8mm Screw
M2 Nut
M2 Nut
d2xD5mm Washer
Washer
d2xD5mm
Washer
d2xD5mm
6
6
M2 Nut
PM2x8mm Clevis
d2.5xD3.2x8mm
d2.5xD3.2x8mm
PM2x16mm
PM2x8mm
2mm
2mm
Copper Plate
1x10x34mm
3.1mm Collar
1.5m m
1.5m m
Aluminium Plate
1.5x10x34mm
M3x3mm
Set Screw
PA3x14mm Screw
PA3x14mm
Bottom View
3
3Set Screw
M3x3mm
PWA2x12mm Screw
15 Rudder Pushrod
14 Flying Wire
13 Tail Landing Gear
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

P.9
Clevis
Fuel Tube
Ø6x5mm
Tri-horn
M3x22mm
Pushrod
Ø1.8x995mm
16 Elevator Pushrod
TWM PL8210010
CLEVIS WRENCH
Ø1mm pilot holes for The World Models tri-horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
PB2x16mm Screw
PB2x16mm
6
3x3mm Set Screw
Linkage Connector
M2 Nut
M2 Nut
2mm Washer
2mm
Washer
2mm
Washer
Servo Tray
Servo Tray
18
Throttle Pushwire
Please refer to the attached sheet for linkage connector installation.
3mm
Throttle Servo
Servo Set
17
Plywood
3x152x218mm
2mm
2mm
1
1
1
2
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com
A053PO28891307

P.10
4
Peel off shaded
Portion covering film
PWA2.3x12mm
Silicon Grommet
d1.5xD6.5mm
PWA2x12mm
1.5mm Pilot
Cockpit Block
PWA2x12mm Screw
20 Windows
PWA2.3x12mm
10
4
PWA2.3x12mm Screw
d1.5xD6.5mm Silion Grommet
21 Wind Shield
1mm
2.5mm
Left Side
Right Side
KM2x8mm
M2 Nut
Elevator Pushrod
Ø1.8x85mm
Pushrod Connector
Elevator Servo
Install and arrange the servos
as shown in the diagram.
Receiver
Battery
Fuel Tank
450cc
Throttle Servo
Elevator Servo
Rudder Servo
Sponge 10x80x200mm
Fuel Tube
Ø6x5mm
Straper
To Throttle
J1(Pushrod Ø1.8x85mm)
J2(Pushrod Ø1.8x995mm)
J1
J2
19 Radio Equipment
Ɣ7RS9LHZ
Charge Receptacles
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com
A053PO28891307

P.11
Main Wing
22
Wing Tube
D16x661mm
Lead to Aileron Servo
Completed
4
Set Screw
M3 x 8mm
Wing Tube
Self Tightening
Wing Latch
Set Screw
M3X8mm
3mm
Set Screw
Wire Ø0.8mm
Completed
Main Wing
23
M3x8mm
d3xD7mm Washer
Washer
d3xD7mm
M3 Nylon Inert Lock Nut
M3 Nylon Inert Lock Nut
2
4
2
M3x8mm Socket Head Screw
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com
A053PO28891307

P.12
Control Throws
25
Aileron
20mm
20mm
Adjust the control throws as shown in
the diagram. These throws are good for
general flying. You can adjust according
to your personal preference.
55mm
55mm
Rudder
40mm
40mm
Elevator
Wing Setting
24
A=A’
B=B’ C=C’
D=D’
AA'
BB'
CC'
DD'
C.G.26
112mm
http://www.theworldmodels.com/para/instruction/instructionManuals.php
4.41in.
C.G.
The ideal C.G. position is 112mm (4.41 in) behind
the leading edge measured at where the wing meets
the fuselage. In order to obtain the C.G. specified,
add weight to the fuselage or move the battery position.
Check the C.G. Before flying.
If you are converting this model to electric, please move
the C.G. forward 10% of current C.G. distance from
leading edge to compensate for weight of fuel.
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

P.13
Important Safety Precautions
# First time flyer should never fly by himself / herself. Assistance from experienced flyer is
absolutely necessary.
# Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
#1/4 Piper J-3 Cub is specially designed to be powered by 2C 0.91 or 4C 1.20 - 1.60
engine, using a morepowerful engine does not mean better performance. In fact, over
powered engine may cause severe damage and injuries.
# Make sure the air field is spacious, never fly the plane too close to people and never get
too close to a running propeller.
# If you find wrinkles on the covering as a result of weather changes, you can use hot iron
to remove the wrinkles. Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone. Too hot an iron may damage the covering.
Don,t use hot iron near the seams or edges,hot iron will melt the glue and shrink the
covering at the same time,causing the seams to pull away.
# Check and re-tighten up all factory assembled screws, use thread locker if necessary.
Warning!
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

LINKAGE CONNECTOR
HW7111050 & HW7111060
After fastening the round nut, make sure that
the linkage connector can rotate freely.
Drill 2mm hole at servo horn.
Insert linkage connector
into servo horn.
Make sure shoulder of
screw is cleared from
servo horn.
Add washer to reduce
play if necessary.
Shoulder
Tighten up the round nut
against the shoulder. Apply
CA or permanent thread
locker.
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com
A053PO28891307

Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
AirBorne Models, 4749-K, Bennett Drive, Livermore, CA 94551 USA.
1. Name:______________________________________________
2. Address:____________________________________________
3. Phone #:____________________ E-mail:__________________
4. Model:______________________________________________
Wing QC#__________ Fuselage QC# _______________________
(QC numbers are stamped on wing and fuselage)
5. Date of Purchase:_____________________________________
6. Store Name: _________________________________________
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com
A053PO28891307

This transparent 3D template
is used for position guidance
of the actual cutting of the
pre-painted cowling.
Usage of the transparent 3D template
Simply cut the transparent 3D template to fit your engine and
exhaust pipe, then slide onto the actual cowling and use as
template to mark the openings required for final cutting.
1 2
3 4
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

Fuel Filter
Code No. Size Package
Code No. Size Package
Code No. Size Package
Code No. Size Package
Code No. Size Package
Code No. Size Package
Code No SV4031
KP0041300
Special tool for clevis installation.
Suitable for standard and small
(EP)clevis.
Large Clevis
Small Clevis
180mm Extension
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

Code No. Size Package
PT1113040 D4xd2mm 1m(Transparent)
PT1113060 D6xd2.5mm 1m(Transparent blue)
PT1113082 D6xd3.2mm 1m(Red)
Silicon Tubes
Package
Code No. Size
HW7120100 1 pc
Fuel Filter
Package
Code No. Size
WF9112400 41-72x28x46.5cm 1 set
Wooden Field Stand (Painted)
Package
Code No. Size
WCR572032 57-92x20x32mm
WCC572032 57-92x20x32mm
1 set
1 set
Wooden Field Box
1 pr
Package
Code No. Size
MS6120040 D40-90mm (wheel)
Adjustable Wheel Chock
AT3001052 D260x900mm 1 pc
Code No. AT3001052 Size Package
Wind sock
Package
1 set
Code No. Size
MS9111500 200x115mm
Detachable Transmitter Stand
Package
Code No. Size
PB2000618 210x115x35mm 1 set
Accessories Box with assorted
screws and hardwares
WCR572032
(Red)
WCC572032
(Cadmium Yellow)
(transparent blue) (red) (transparent)
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307

The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
A053PO28891307