ThePondguy PondShelter 160350 Instruction Manual

PondShelter
Water Garden & Fish Pond Net Kit
Installation & Maintenance Manual
(Item # 160350)
1 Year Warranty
™
Important Information........................2
Package Contents.............................2
Technical Specs ...............................2
Assembly Instructions.........................3
Maintenance.................................4
Warranty Information.........................4
Table of Contents:

IMPORTANT INFORMATION:
Please read these instructions thoroughly before use. Failure to follow instructions may
result in equipment damage or failure, losses, injury or death.
WARNING:
• Use in winter will cause damage to the poles and nets, voiding the warranty.
IMPORTANT:
The Pond Guy® is not responsible for equipment damage or failure, losses, injury or death resulting from
failure to follow safety precautions, misuse or abuse of equipment.
Package Contents PONDSHELTER™:
PondShelter™
A1 - AluminumFrame
B1 - Premium 1/4”Mesh Netting
C30 - Metal Stakes
D4 - Nylon Tie-Downs
TECHNICALSPECS :
MODEL MESH
DIMENSIONS POND SIZES ALUMINUM FRAME SIZE STAKES TIE-DOWN LENGTH
PondShelter™20’L x 20’W 4’x6’- 16’x 11’ 4’-10’ (30) 6½” 10’
ABCD
thepondguy.com | 866-POND-HELP (766-3435)
2

ASSEMBLY INSTRUCTIONS PONDSHELTER™:
See video instructions of the PondShelter™ net online @
www.thepondguy.com/pondshelter
Step 1
Unpack the Contents
Unpack net and frame assembly,
stakes, and tie-downs. Inspect and
count contents for accuracy.
Step 2
Prepare the Legs
Unroll netting from around the
aluminum frame. Slide the netting
completely up each leg until
bottom grips are exposed. When
nished, stand net up to look like
a tent and prep for installation.
Step 4
Adjust the Netting
Pull netting down over the frame
and t along the perimeter of the
pond. Pull the drawstring at the
base of the net to form a tight t.
The drawstring can be held in place
with a stake to prevent loosening.
Step 3
Position Frame Over Pond
Fit frame over pond and adjust legs
to the corresponding landscape.
Turn legs counter-clockwise to
unlock and adjust. When nished,
twist clockwise to lock in place.
Once legs are properly positioned,
stake in place via the nylon
anchoring loop attached to the
bottom grips.
Step 5
Secure the Netting
Place stakes through the reinforced
band at the base of the netting
to hold in place. A 3’“skirt” of
additional netting extends past the
reinforcement to ll exposed gaps
in landscape.
Step 6
Clip-on the Tie Downs
Clip tie-downs to the center of
each span of netting. Pull tie-
downs tight and stake down to
eliminate any net sag.
15425 Chets Way | Armada, MI 48005 3

4
MAINTENANCE :
• As leaves or debris gather on the netting, remove the stakes from one side, lift the
netting, and shake free leaves and debris.
• We recommend to remove the PondShelter™ when heavy snows or ice storms
approach or when closing your pond for winter.
Failure to do maintenance tasks may result in net tearing or collapsing.
WARRANTY:
All PondShelter™ nets carry a 1-year warranty. The Pond Guy® will repair or replace
any units found to be defective. This limited warranty is extended exclusively to
the original purchaser and begins from the date of original purchase receipt. Use in
winter will cause damage to the poles and nets, voiding the warranty. Please call for a
Return Authorization Number prior to returning product by calling our Customer Care
Department at 866-766-3435. Failure to request an RMA number may result in delay or
dismissal of your warranty claim.
View other great products on-line at www.thepondguy.com V1.1
THANK YOU FOR CHOOSING:
The Pond Guy®Inc.
We Know Ponds™
15425 Chets Way
Armada, MI 48005
866-POND-HELP (766-3435)
thepondguy.com