Felton Digital FELBRSH User manual

WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULY BEFORE ASSEMBLING THE BANK REST BENCH SHELTER.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two or more people as liing is involved. Please ensure bolts are only nger ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before installing the Back Rest Bench Shelter into the ground.
BACK REST BENCH SHELTER
(CODE No. FELBRSH)
A. Locate the two frames [PBRS1] up with bolt down lugs facing
inwards.
B. Place the seat plank supporting brace [PBRS5] in between the
side frames [PBRS1] and secure it with the hex head bolts
[PBRS9/10], lock nuts [PBRS11] and plain washers [PBRS12] as
shown - finger tighten.
1
ITEM DESCRIPTION QTY
PBRS1 SIDE FRAME 2
PBRS2 BACK REST-2040 mm. 1
PBRS3 SEAT PLANK –2040 mm. 1
PBRS4 ROOF ASSEMBLY 1
PBRS5 SEAT PLANK SUPPORT 1
PBRS6 M6 x 25mm. HEX BOLT 12
PBRS7 M6 LOCK NUT 12
PBRS8 M12 x 45 mm. HEX. BOLT 4
PBRS9 M12 x 90 mm. HEX.BOLT 2
PBRS10 M12 x 110 mm. HEX.BOLT 4
PBRS11 M12 LOCKNUT 10
PBRS12 M12 PLAIN WASHER 20
P1
(IT CONTINUES ON THE BACK OF THIS SHEET)
[PBRS12x4]
[PBRS1x2]
[PBRS4]
[PBRS3]
[PBRS5]
[PBRS 6/8/9]
[PBRS 7/10]
Thank you for purchasing our high quality products. The Back Rest Bench Shelter has been manufactured with cered materials to achieve high reliability and minimum mainte-
nance. It is our commitment to provide cost - eecve soluons for outdoor applicaons.
[PBRS 11]
[PBRS2]
[PBRS1]
[PBRS10x2]
[PBRS11x4]
[PBRS12x4]
[PBRS2]
[PBRS9x1]

A. Place the seating plank [PBRS3] on to the fixing plates of the supporting brace [PBRS5] and
secure them, by using hex. head bolts [PBRS6] and lock nuts [PBRS7] - Finger tighten.
2
3
P2
[PBRS6x4]
[PBRS7x4]
[PBRS3]
A. Place the back rest plank [PBRS2] on to the fixing plates of the supporting brace [PBRS5], and
secure it, by using hex. head bolts [PBRS6] and lock nuts [PBRS7] - Finger tighten.
[PBRS7x2]
[PBRS6x4]
Hex bolt Lock nut
Back rest
ASSEMBLED BACK REST
[PBRS5]

A. Place the shelter roof [PBRS4] on
top the main frames [PBRS1] and
secure them with hexagonal bolts
[PBRS8], lock nuts [PSD11] and
plain washers [PSD12] on both
ends, as shown - nger ghten.
B. Adjust and ght the whole structure
with spanners and appropriate
tools.
C. Aach the whole unit to the ground,
by using dyna-bolts on each frame
lug.
[PBRS8x2]
[PSD11x2]
[PSD11x2]
[PSD10x2]
2
A. Turn the enre assembly upright and mark the locaon of the supporng legs, according to
the illustraon above.
B. Prepare the legs foundaon as necessary.
C. We recommend embedding the back rest shelter legs into the concrete foundaon 900 mm.,
to guarantee a proper seang height.
3
P2