Thermador CVS2 Series Technical manual

PLANNING GUIDE
ELECTRIC COOKTOPS

ELECTRIC COOKTOPS
Ceramic Electric Cooktop with Cutout
Shown with C301 Single Oven and HDW Chimney Hood
Model No. CW Cutout Width CD Cutout Depth OW Overall Width OD Overall Depth SB Min. Set Back
Ceramic Electric Cooktop Comprehensive Countertop Cutout with Downdraft
CVS2 UCV CVS2 UCV CVS2 UCV CVS2 UCV CVS2 UCV
CEP304 283/4283/4221/8221/831 31 237/8237/821/221/2
CET304 283/4283/4221/8221/831 31 237/8237/821/221/2
CEF304 283/4283/4221/8221/831 31 237/8237/821/221/2
CEM304 283/4283/4221/8221/831 31 237/8237/821/221/2
CEP365 343/4343/4221/8221/837 37 237/8237/821/221/2
CET365 343/4343/4221/8221/837 37 237/8237/821/221/2
CEF365 343/4343/4221/8221/837 37 237/8237/821/221/2
CEM365 343/4343/4221/8221/837 37 237/8237/821/221/2
CEP456 433/4433/4221/8221/846 46 237/8237/821/221/2
CEM456 433/4433/4221/8221/846 46 237/8237/821/221/2
Overall Cutout Element Wattage/Size (in mm.)
Model No. Dimensions Dimensions* Front Rear
A B C D E Left Right Left Middle Right
Ceramic Electric Updraft Cooktops
CEP304 31 215/835/8283/4- 287/8197/8- 20 1,200 1,200 750/2,200 N/A 800/1,600/2,300
140 140 120/210 N/A 120/175/210
CET304 31 215/835/8283/4- 287/8197/8- 20 1,200 1,200 750/2,200 N/A 800/1,600/2,300
140 140 120/210 N/A 120/175/210
CEF304 31 215/835/8283/4- 287/8197/8- 20 1,200 1,200 750/2,200 N/A 800/1,600/2,300
140 140 120/210 N/A 120/175/210
CEM304 31 215/835/8283/4- 287/8197/8- 20 1,200 1,200 750/2,200 N/A 750/2,200
140 140 120/210 N/A 120/210
CEP365 37 215/835/8343/4- 347/8197/8- 20 1,200 1,800/Bridge 750/2,200 800/1,600/2,500 1,800/Bridge
140 180 120/210 120/180/230 180
CET365 37 215/835/8343/4- 347/8197/8- 20 1,200 1,800/Bridge 750/2,200 800/1,600/2,500 1,800/Bridge
140 180 120/210 120/180/230 180
CEF365 37 215/835/8343/4- 347/8197/8- 20 1,200 1,800/Bridge 750/2,200 800/1,600/2,500 1,800/Bridge
140 180 120/210 120/180/230 180
CEM365 37 215/835/8343/4- 347/8197/8- 20 1,200 1,800/Bridge 750/2,200 1,100/2,500 1,800/Bridge
140 180 120/210 140/230 180
CEP456 46 215/835/8433/4- 437/8197/8- 20 800/1,900 1,800/Bridge 1,200 800/1,600/2,500 1,800/Bridge
1,100/2,500
120/195 180 140 140/230 180
140/230
CEM456 46 215/835/8433/4- 437/8197/8- 20 800/1,900 1,800/Bridge 1,200 1,100/2,500 1,800/Bridge
1,100/2,500
120/195 180 140 140/230 180
140/230
A
30"-36" B
C
D
E
Recommended vertical
clearance between
cooking surface and
bottom of hood.
Hood width should be
equal to or greater than
cooktop width.
SB
BT**
Countertop Cutout for Downdraft (UCV)
Countertop Cutout for Downdraft (CVS2)
SB
1
/
8
"
1
/
8
"
BT**
2
1
/
4
"
2
1
/
4
"
433/8" CVS245
343/8" CVS236
283/8" CVS230
431/2" UCV45
341/2" UCV36
281/2" UCV30
CD
OD
CD
OD
CW
OW
CW
OW

General Information
CEP30 CEP36
MODEL NUMBER CET30 CEM30 CET36 CEM36 CEP45 CEM45
CEF30 CEF36
208-240 Volts, 3 Wire, 60 Hz III
208-240 Volts, 4 Wire, 60 Hz III
Amps 30 30 40 40 40 50
Approx. Shipping Weight (lbs.) 35 35 45 45 45 55
Cooktops are UL and CUL approved with the exception of the CEM365, CEM456 and CEP456, which are UL approved only.
ELECTRIC COOKTOPS
Notes: All height, width and depth dimensions are shown in inches. *Please refer to installation instructions prior to making cutout. Installation instructions are available at
www.thermador.com. Countertop must be 26" wide overall for best fit. When the under cabinet measures 24" front to back (outside dimensions), it must be positioned so
the counter top has a 1" overhang. The countertop must have a 25" flat area so no problems can occur with a backsplash. Important to measure it from the front edge of
the countertop. All cutouts start at 21/2" from the front edge of the countertop.**“BT” (Backsplash Thickness) = 0
For immediate critical installation dimensions by fax, use your fax handset and call [phone]. Use code #8030 for a directory of Thermador®products.