Thermal Dynamics VICTOR 200 AUTO-CUT User manual

ManualNo.0-4805-AR
Manual Assembly Instructions
- Separate this sheet from the rest of the manual.
- Locate and remove 'Page 1' of this manual. Follow the directions on 'Page 1'.
- Locate the set of tabs for this manual.
- Locate the torch information section, which will become section 8 of this manual.
- Find the sheets saying 'Insert Section ___ tab here. Discard this sheet'. Insert the appropriate
tabs and discard the 'Insert Section ___ tab here. ' sheet.
- At Section 8, insert the torch information section.
-Insert the assembled manual sections and tabs into the 3-ring binder.
- Keep this manual with the power supply for installation, operation, maintenance, and replacement
parts information.
OPTIONAL:
Copy Section 8 (torch operational data) for operator convenience. This section includes data that
will be needed repeatedly for system operation, depending on the metal to be cut and the gases in
use.
- Discard this sheet.
NOTE:
Power supply schematics are provided separately. The system operator may want to keep them
with this book or in a separate location.

Thispageintentionallyblank

Auto-Cut®200 Plasma Cutting System
Cut out one strip and use as spine label in binder. Discard extras.
Use next page as front cover insert in binder.
ManualNo.0-4805
Auto-Cut®200 Plasma Cutting System Auto-Cut®200 Plasma Cutting System
Pg 1

Thispageintentionallyblank

PLASMA CUTTING SYSTEM
200 AUTO-CUT®
Rev.AR Date: January 8, 2013 Manual # 0-4805
OperatingFeatures:
Operating Manual

Thispageintentionallyblank

Rev.AR Date: January 8, 2013 Manual # 0-4805
OperatingFeatures:
PLASMA CUTTING SYSTEM
200 AUTO-CUT®
Operating Manual

WE APPRECIATE YOUR BUSINESS!
Congratulations on your new Thermal Dynamics product. We are proud
to have you as our customer and will strive to provide you with the
best service and reliability in the industry. This product is backed by
our extensive warranty and world-wide service network. To locate your
nearest distributor or service agency call 1-800-426-1888, or visit us
on the web at www.thermal-dynamics.com.
This Operating Manual has been designed to instruct you on the
correct use and operation of your Thermal Dynamics product. Your
satisfaction with this product and its safe operation is our ultimate
concern. Therefore please take the time to read the entire manual,
especially the Safety Precautions. They will help you to avoid potential
hazards that may exist when working with this product.
YOU ARE IN GOOD COMPANY!
The Brand of Choice for Contractors and Fabricators Worldwide.
Thermal Dynamics is a Global Brand of manual and automation Plasma
Cutting Products for Thermadyne Industries Inc.
We distinguish ourselves from our competition through market-
leading, dependable products that have stood the test of time. We
pride ourselves on technical innovation, competitive prices, excellent
delivery, superior customer service and technical support, together
with excellence in sales and marketing expertise.
Above all, we are committed to developing technologically advanced
products to achieve a safer working environment within the welding
industry.

!
WARNINGS
Read and understand this entire Manual and your employer's safety practices before
installing, operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judge-
ment, the Manufacturer assumes no liability for its use.
Plasma Cutting Power Supply, Auto-Cut® 200
Operating Manual No. 0-4805
Published by:
Victor Technologies
16052 Swingley Ridge Road, Suite 300
Chersterfield, MO 63017
636-728-3000
www.thermal-dynamics.com
© Copyright 2005, 2006, 2007,2008, 2009, 2010, 2011, 2012, 2013
by
Victor Technologies
All rights reserved.
Reproduction of this work, in whole or in part, without written per-
mission of the publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to
any party for any loss or damage caused by any error or omission
in this Manual, whether such error results from negligence, acci-
dent, or any other cause.
Publication Date: October 7, 2005
Revision Date: January 8, 2013
Record the following information for Warranty purposes:
Where Purchased: ___________________________________
Purchase Date:______________________________________
Power Supply Serial #:_______________________________
Torch Serial #:_______________________________________

Thispageintentionallyblank