Thermalright MUX - 120 User manual

Important!Before proceeding with installation, please check
for the most up-to-date instructions at www.thermalright.com
MUX - 120 Intel Socket LGA1156
Exploded View Component
The Ultimate Cooling Solutions! 1.
5
12 3
467
8
Parts Name
1
Piece(s)
2
34
56
7 8
1
2
4
4
1
1
2
4
Parts Name Piece(s)
Chill Factor 2
Thermal Paste
MUX-120 Heatsink 1156 Backplate
120mm Fan clip
Anti-vibration strip
X-Silent 120mm Fan
910
10
91 1
M3x0.5 Screw Spring Loaded Screw
Mounting Plate1156 Bracket Mount
MUX-120 Heatsink
120mm Fan clip
Anti-vibration strip
1156 Backplate
1156 Bracket Mount
M3x0.5 Screw
Spring Loaded Screw
Mounting Plate

Single Fan Double Fan
Apply the anti-vibration strips to each side of
Step 6：Fan Installation Double-fan Installation:
Step 1：Accessory Installation
heatsink. Insert each end of the fan wire into
the designated holes on the heatsink.
Place the 12 cm fan next to the heatsink. Pull on fan wire clips
to hook into fan mounting holes. Plug in fan for power.
Installation completed.
To install a second fan, simply follow the fan installation guide on
the other side of the cooler to make for a push-pull airflow.
Step 3：Thermal Paste Application
Apply a thin evenly spread out layer of
thermal paste to the CPU and to the bottom
of the heatsink base.
Step 2：Bracket Mount Installation
Use the four M3x0.5 screws to secure the
Step 4：Slide the mounting plate through
Step 5：Place the heatsink on top of CPU and
1156 bracket mount to the 1156 backplate
with the motherboard in between.
between the heatpipes and place it in the
dimple on top of the heatsink base.
secure in place by tightening on the spring loaded
screws.
Step 6: