Thermaltake ARGENT H5 RGB User manual

다 국 어 지 원 빠 른 설 치 가 이 드

Headset Features
Package Contents
1. 40mm Hi-Res Dynamic Driver
2. 16.8 Million Color LightingRGB
3. Leatherette Headband
4. 15 Level Headband Adjustment
5. Plush Memory Foam and Detachable Ear Pads
6. Detachable Microphone
ARGENT H5 Wireless 7.1 Gaming Headset* 1
§RGB
USB Audio Receiver* 1
§
USB C To USB A Charging Cable* 1
§
USB C To 3.5mm Cable* 1
§
USB Extension Cable* 1
§
Multi-language Quick Installation Guide* 1
§
Warranty Card* 1
§
7. Volume Control Buttons
8. Power Button & Charing Indicator
9. DTS 7.1 Surround Sound & Battery Status Button
10. Mic Mute & Game / Chat Balance Button
11. Connect Button
12. For 3.5mm Headphone Port
System Requirements
PC with available USB port
§
®
Windows Win7 / Win8 / Win 10
§
Internet connection
§
200 MB of free hard disk space
§
9
10
11
12

CONNECTING TO DEVICES VIA 3.5MM COMBO PORT
If your device has a 3.5mm audio + mic combined jack, simply plug the 3.5mm audio cable from
your headset to your device's audio jack.
CONNECTING TO YOUR PC VIA USB PORT
1. Plug the USB audio receiver connector into your computer.
The [Hardware found] notice will appear.
2. Power on your headset by holding the power button for at least 5 seconds or until logo led lights up.
3. Wait until the status logo led is lighting effect.RGB
4. Download the ARGENT H5 Wireless 7.1 Gaming Headset software from www.thermaltake.com. RGB
Run the installer and follow the steps as instructed on screen.
*Adapter required for XBOX One controllers with no
3.5mm por t(Adapter sold separately).
Note : keep your headset within close proximity of the USB wireless transceiver for a faster and more stable connection. If
your headset fails to connect, it will automatically power off after a few minutes.
NOTI FICATION
Blue Blinking
Blue Rapid Blinking
Lighting EffectRGB
LOGO L ED STATUS
Connecting
Pairing
Connected

USING THE DTS 7.1 SURROUND SOUND
1. Install TT iTAKE and open software.
2. Enable by press the button and you
hear the sound indicator.
3. Press the buttons to increase or
decrease the volume.
USING THE GAME / CHAT BAL ANCE
1. Install TT iTAKE and open software.
2. Enable by holding the button for at
least 5 seconds or until you hear the sound
indicator.
3. Press the buttons to increase the in-
game volume and decrease the voice
chat volume or vice versa.
CHARGING YOUR HEADSET
Connect your ARGENT H5 Wireless 7.1 Gaming Headset to a powered USB por t using the RGB
charging cable.
For best results, please fully charge your headset before using it for the first time. A depleted headset
until will fully charge in about 4 hours.
UNDERSTANDING THE CHARGING NOTIFICATIONS
STATUS INDICATOR
Red LED On
Red LED Off
DESC RIPT ION
Charging
Fully Charged

UNDERSTANDING THE BATTERY NOTIFICATIONS
Do not disassemble the headset or operate the headset under abnormal conditions.
§
Do not submerge headset in water.
§
For more information regarding the headset and its related accessories, please visit
§
Thermaltake’s website at www.thermaltake.com.
Avoid using headsets with the volume turned up for an extended period of time.It may cause
§
damage to your hearing.It is strongly recommended that moderate sound should be applied
when using the headset at all times.
Holding the button for at least 5 seconds, the logo led will blink the batter y indication level for 5
seconds.
BATTERY STATUS
100 - 80%
80 - 20%
< 20%
LOGO L ED STATUS
Green
Yellow
Red

品名 : ARGENT H5  7.1 電耳RGB型 : GHT-THF-WIECBK-32
附 USB 埠的電
§
®
Windows Win7 / Win8 / Win 10
§
際路
§
200 MB 可用硬碟間
§
1. 40mm Hi-Res 動單體
2. 1680  色彩燈RGB
3. 皮質軟墊頭
4. 15 頭整
ARGENT H5  7.1 電耳* 1
§RGB
USB * 1
§
USB C 轉 USB A 電* 1
§
USB C 轉 3.5mm 傳輸* 1
§
USB * 1
§
多國快指南* 1
§
保固卡* 1
§
需求
5.  和 可拆式耳罩
6. 可拆式克
7. 量制
8. 電源  電指示燈
9. DTS 7.1   電量示 
10. 克  平衡 
11 .對
12. 用 3.5mm 耳插孔
9
10
11
12

透過 USB 連結埠連接電腦
1.  USB 的頭電。 示 [Hardware found] (找硬體) 知。
2. 住電源少 5秒 TT 標，來開啟耳的電源。
3. 等待 TT 標狀示 燈，示已。RGB
4.  tw.thermaltake.com 下載其專動式，並照來成。
透過 3.5MM 複合式插孔連接裝置
如果你的有 3.5mm  + 克合式插孔，只要 3.5mm傳輸一插入耳，另一插入
的插孔可。
*XBOX One 制有 3.5mm 口需要購買轉(單獨購買)。
通知訊號
光閃
光快閃
燈RGB
TT 標幟狀態
中
對中
已
注: 耳保持在 USB ，樣會更快也更。 耳未，
會在數分自動閉電源。

使用 DTS 7.1 環繞音 效
1.  TT iTAKE 並開啟軟體。
2. 下 來啟動功並且會聽
題示。
3. 下 可加或減少量大小。
使用 遊 戲 / 語音 平衡功 能
1.  TT iTAKE 並開啟軟體。
2. 住 少5秒聽提示。
3. 下 可加或減少
的量平衡 。
為耳 機充電
使用電你的 ARGENT H5  7.1 電耳上可供電的 USB 埠。RGB
在一次使用你的耳前電，可以揮佳。 電量盡的需4小時。
狀態指示燈
光
光閉
說明
電中
已電
認識 充電通知 訊號

勿自行拆卸耳或在異常件下操作耳。
§
勿耳入水中。
§
耳相件的資， Thermaltake (址為 www.thermaltake.com.tw)。
§
使用耳時，並時間使用量。易成聽力損傷，烈使用耳時，保持中等量。
§
電池狀態
100 - 80%
80 - 20%
< 20%
TT 標幟狀態
色
黃色
色
認識 電池通知 訊號
住 少5秒 TT 標閃電量示狀五秒。