Thermo Scientific Invitrogen E-Gel G8000 User manual

For Research Use Only. Not for use in diagnostic procedures.
E-Gel™ SimpleRunner Electrophoresis Device
Catalog Number G8000
Pub. No. MAN0017211 Rev A.0
Components Amount
E-Gel™Simple Runner Electrophoresis Device 1 each
Power cord with universal adapter
1 each
Specifications
Dimensions
12.5 cm x 13 cm x 13.5 cm
Weight
1.19 lbs (540 g) with adaptor
Safety
UL listed and CE certified
Temperature Ambient 15°C to 40°C
Built-in Features Alarm, light LED
Adaptor specifications
Use only suitably certified adapter marked LPS (Limited Power Source) or NEC Class 2
included with the E-Gel™Simple Runner Electrophoresis Device. Input and Output
supplied by the adaptor are shown in the following table.
Country Input Output
U.S. and Canada 110–120 V AC, 60 Hz 12 V DC, 1 A
Europe
220–240 V AC, 50 Hz
12 V DC, 1 A
Safety
Operation of the E-Gel™Simple Runner Electrophoresis Device is subject to the following
conditions.
•Indoor use.
•Maximum relative humidity: 80% (ma ximum relative humidity 80% for temperatures
up to 31ºC, decreasing linearly to 50% relative humidity at 40ºC).
•Caution! Unit employs internal hazardous voltages. Do not open.
•Mains supply voltage fluctuationsnot to exceed 10% of the nominal voltage (100–240 V,
50/60 Hz, 6.3A).
•Mains plug is a disconnect device and must be easily accessible.
•The protection provided by the equipment may be impaired if the equipment is used in
a manner not specified by the manufacturer.
•The device must be connected to a mains socket outlet with protective earthing
connections.

For support visit thermofisher.com/support or contact [e-mail]
thermofisher.com
12 July 2017
Explanation of Symbols and Warnings
Symbol Description
The CE mark symbolizes that the product conforms toall applicable
European Community provisions for which this marking is required.
The E-Gel™Simple Runner Electrophoresis Device complies with the TUV
Rhineland North America Inc. safety requirements. The indicators "C" and
"US" mean that the product is certified for both the U.S. and Canadian
markets, to the applicable U.S. and Canadian standards.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
•This device may not cause harmful interference.
•This device must accept any interference received, including
interference that may cause undesiredoperation.
Cau t i on
The Caution symbol denotes a risk of safety hazard. Refer to accompanying
documentation to avoid possible personal injury or instrument damage.
The Electrical Warning symbol denotes a risk of electrical shock hazards. To
avoid risk of injury from electric shock, do not openenclosures marked with
this symbol.
WEEE
The WEEE (Waste Electrical andElectronic Equipment) symbol indicates that
this product should not be disposed of in unsorted municipal waste. Follow
local municipal waste ordinances for proper disposal provisions to reduce
the environmental impact of WEEE. Visit
http://www.lifetechnologies.com/weee for collection and recycling options.
Consult instructionsfor use.
Product catalog number.
Site of manufacture.
Double insulated unit.
The RCM symbol denotes that thedeviceis compliant withthe
electromagnetic compatibility (EMC) of the Australian Communication and
Media Authority (ACMA), Electrical Regulatory Authorities Council
(ERAC), and Radio Spectrum Management (RSM).
This product has been evaluated for compliance with China RoHS 2 (also
known as the Administrative Measure on the Control of Pollution Caused by
Electronics Information).