ThinkGizmos TG913 User manual

SUITABLE FOR AGES 3 YEARS+
PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THIS INSTRUCTION BOOKLET FOR FUTURE
REFERENCE.
DUE TO CONTINUAL IMPROVEMENTS ACTUAL PRODUCT MAY BE DIFFERENT TO ILLUSTRATIONS
Not for children under 3 Years. To be used under the direct
supervision of an adult.
Any packaging ties, bags and screws are not part of the product.
For safety please remove and discard any packaging ties, bags
and screws before giving this toy to your child.
TG913 - IMAGE PROJECTING
LASER GUN SET
User Manual

ENGLISH MANUAL - CONTENTS
1. 1.1 Safety Information .............................................................................................. 3
1.2 Battery Safety ...................................................................................................... 3
1.3 Battery Installation ............................................................................................. 4
IMPORTANT INFORMATION
2
2.1 Laser Guns ........................................................................................................... 4
2.2 Projector .............................................................................................................. 5
PRODUCT DETAILS
2.
If you have any issues with your product or have any
questions, please contact us via email:
[email protected]
This is the quickest way to resolve any problems. You
will be surprised how fast we will get back to you on
email with a resolution.
All our products are covered by our manufacturer’s
warranty, details can be found on page 8.
For more of our brilliant products, search Amazon for
“ThinkGizmos”.
ThinkGizmos
“Small enough to care. Big enough to deliver”.
Warranty Information ............................................................................................ 10
WARRANTY
3.1 Laser Battle .......................................................................................................... 5
3.2 Laser Shootout Setup ......................................................................................... 6
3.3 Laser Shootout Game Modes ........................................................................... 7
3.4 Additional Information ....................................................................................... 8
3.5 FAQ ....................................................................................................................... 9
USAGE INSTRUCTIONS
3.

3
1. IMPORTANT INFORMATION
1.1 Safety Information
1.2 Battery Safety
1) Use only brand new batteries of the correct size and power.
2) Do not mix old and new batteries, dierent types of batteries (zinc, alkaline or
rechargeable).
3) If using rechargeable batteries, ensure they are all the same capacity.
4) Do not try and charge non-rechargeable batteries.
5) Rechargeable batteries should be charged by an Adult or under Adult supervision. Stop
charging immediately if you notice any abnormal behaviour.
6) Do not throw batteries in the re.
7) Replace all batteries of the same type/brand at the same time.
8) The supply terminals are not to be short circuited.
9) Remove empty batteries from the product.
10) Batteries should be changed by an Adult.
11) If the toy is going to be inactive for a long period of time, please remove all batteries.
12) For your safety, please operate according to these instructions.
Thank you for purchasing the Image Projecting - Laser Gun Set. Please read through this
instruction manual before use as it contains all the information you need about how to
correctly enjoy this product.
CAUTION
ELECTRONIC PRODUCT
Do not leave children unattended with this toy. Not suitable for children under the age of 3
Years.
This product should be used in accordance with this user manual in a safe way to avoid
electric shock or injuries.
ADULT SUPERVISION REQUIRED
WARNING! Do not try to modify this product in any way as this may invalidate your
warranty.
WARNING! Contains small parts, child supervision is required at all times.
DO NOT immerse the guns or projector in water, they are electrical products and will get
damaged.
AVOID exposing to excess heat or leave out in direct sunlight.
NEVER aim the projection or laser guns towards eyes.

4
1.3 Battery Installation
Battery Information:
●A small crosshead screwdriver (Phillips) is required to remove the battery compartment
on the Laser Guns and Projector.
●Make sure the toys are switched o.
●Insert 3x AA batteries (supplied) into the battery compartment of the Laser Guns and 4x
AA batteries (supplied) into the projector, observing the correct polarity as indicated.
●Re-t the battery cover and secure with the screw.
(Warning - Remove the batteries if the Toy is not going to be used for a long time.)
LASER GUNS IMAGE PROJECTOR
2. PRODUCT DETAILS
2.1 Laser Guns
Life Indicator
Team Selection
Team
Colour
Infrared Light
Firing Indicator
Infrared Receiver
Gun & Battle Mode
Select Button
Trigger
Laser Clip
Power Switch
Speaker

5
2.2 Projector
3.1 Laser Battle
1. Insert the batteries into the Laser Guns.
2. Turn the guns on with the on/o switch. The team colour light and life indicator will ash
with sound playing.
3. Once the team colour light stops ashing the gun is ready.
4. Press the Team Selection button to select your team. The team colours are Blue, Red,
Green and White. If the same colour is selected on both guns you will be unable to play
the laser battle.
5. Press the Gun select button to choose the type of gun being used:
Gun Types:
Pistol: 12 Bullets, 1 Life lost when target is hit.
Shotgun: 6 Bullets, 2 Lives lost when target is hit.
Machine Gun: 6 Bullets, 2 Lives lost when target is hit.
Rocket Launcher: 1 Missile, 3 Lives lost when target is hit.
6. Once the gun type and team have been selected you are ready for battle.
7. Aim the gun at the opponents gun and pull the trigger to re.
• When you re the gun will ash, vibrate and play a shooting sound.
• If you are hit the gun will shake, make noise and your life indicator will reduce.
• You will NOT be able to re if all your lives are used and the team light will ash quickly,
signalling the end of the game.
8. To reload press the Laser Gun Clip up into the gun, then you are ready to play again.
PLEASE NOTE: The max shooting range of the guns is 40 meters.
3. USAGE INSTRUCTIONS
The Image Projection - Laser Gun set includes 2 dierent game modes.
1. Laser Battle - Battle with your friends in a laser tag game using just the laser guns.
2. Laser Shootout - Use the Projector for a target shooting competition.
Projection Lenses
Projection Card
Slot
Team Indicator Light
Reset Button
Start / Pause Button
Mode Select Button
Display Screen

6
3.2 Laser Shootout Setup
Enabling / Disabling Projection Mode on the Laser Guns:
Follow the instructions below to enable Projection Mode when using more than one laser
gun:
1. Insert the batteries into the Laser Guns and the Projector.
2. Turn the guns on with the on/o switch. The team colour light and life indicator will ash
with sound playing.
3. Press and hold the Battle Mode & Team Selection button at the same time for 2 seconds
and you should hear ‘Open Projection Mode’. Projection Mode is now enabled.
Follow the instructions below to disable Projection Mode when using more than one laser
gun:
1. To turn o projection mode press and hold the Battle Mode & Team Selection button at
the same time for 2 seconds and you should hear ‘Close the Projection Mode’. Projection
Mode is now disabled.
2. You can also turn the gun on/o with the switch to reset to default settings.
If you are using only 1 Laser Gun in the Laser Shootout you do not need to follow
these steps and the gun will automatically work with the projector.
Projector Setup:
For best performance place the projector 110-130cm (43-51 Inches) in front of a white and
at wall and 70-90cm (27-35 Inches) o the ground.
1. Insert the required projection card (Dinosaur, Duck or Flying Saucers) into the slot on the
top of the projector.
2. Turn on the power switch on the base of the Projector.
3. The projector will play the startup music and will then announce “Please adjust the focal
length”.
4. The 2 projection lights will be on for 10 seconds each. During this time manually rotate
the front lenses left or right until the projected images are clearest on the wall.
5. Once the second light has turned o the projector will enter standby mode automatically
or press any button to end the focussing mode early.
6. If you need more time to focus the lenses turn the projector o and on to restart the
process.
7. Changing the Projection Card: To remove the projection card Press and hold in the
button on the top of the card before pulling the card out of the Projector. Trying to
remove the card without pressing and holding the button will damage the Projection
Card.

7
Stage Mode (L1):
Follow the instructions below to enable the stage mode of the Laser Shootout:
1. Make sure the Projector is in standby mode.
2. Press the Mode Select Button.
3. The screen will show L1 and the Projector will announce “Stage Mode”.
4. Press the Start Button to begin.
5. The display will show 01 and will announce “Level One Let’s Go”.
How to Play:
1. Ten images will display per level.
2. When one appears aim the laser gun at it and shoot.
3. If hit the image will explode and drop down.
4. Continue shooting the images until the level ends.
5. If you miss more than once per level you will fail the level.
6. There are 10 levels in this mode and with each level the diculty gradually increases.
7. If you fail a level press the start button to replay the level.
Manual Level Select:
1. Follow the instructions to select the Stage Mode.
2. Press and hold the start button for 2 seconds, the number will loop 0 to 10.
3. Press the Start button again to select the required level.
3.3 Laser Shootout Game Modes
Competition Mode (L2):
This mode is a multi-player and multi-team competion mode. There can be a max of 4
teams which need to be selected before the game starts by pressing the team select button.
Follow the instructions below to enable the Competion Mode of the Laser Shootout.
1. Make sure the Projector is in standby mode.
2. Press the Mode Select Button twice.
3. The screen will show L2 and the Projector will announce “Game Mode”.
4. Press the Start Button to begin.
How to Play:
1. 50 images will display.
2. When an image appears the rst team to shoot it gets a point and the team colour will
light on the projector.
3. The display screen will show the current scores for each team.
4. After 50 images have shown the game will end and announce “Game Over”
5. Each teams nal scores will be shown on the display.
6. The winning team will be shown last with the team colour displaying and the nal score
shown.
7. The projector will also announce the name of the winning team e.g. “Red Team Wins”.
8. If two or more teams are tied for rst place the Projector will announce the team who
got to the winning score rst as the winner.

8
3.3 Additional Information
• Usage Environment: The Image Projecting Laser Gun Set is an indoor projection toy.
The projected image will display better on a at hard surface.
• Pause Function: Press the Start Button once to pause the game. Press the Start Button
again to continue the currently paused game.
• Reset Function: Press the Reset Button at any time when the power is on to set the
Projector back in a standby state.
• Low Battery Reminder: The system will announce “Please Replace The Batteries” when
the batteries are starting to run out, replace the batteries to continue playing.
• No Card Reminder: If any button is pressed without the projection cards being inserted
the system will announce “Please Insert The Card”.
• No Mode Selected Reminder: If you press the the start button in standby mode without
selecting a game mode the system will announce “Please Select The Mode”.
• Changing the Projection Card: To remove the projection card Press and hold in the
button on the top of the card before pulling the card out of the Projector. Trying to
remove the card without pressing and holding the button will damage the Projection
Card.
• Removing the Projection Card During Use: If you remove the projection card during a
game mode the system will automatically return to standby mode.
• Projector Battery Warning: If the display on the projector shows 00 it means the
batteries are too low and need replacing.
• Laser Gun Battery Warning: If 3 life lights ash together slowly it means the batteries
are too low and need replacing.

9
3.4 FAQ
Question Possible Reason Solution
Product does not
function.
• The battery is not installed
correctly or is damaged.
• Reinstall or change the
battery.
• The Power Switch is o • Turn the Power Switch to On.
Gun fails to hit
the target.
• You are aiming at team-
mates.
• Aim at targets on a dierent
teams.
• The gun has not been re-
loaded after changing gun
type or using all the bullets.
• Press the Laser Clip up into
the gun to Reload.
• Projection Mode is active. • Turn the power o and on.
• Out of Shooting Range. • Shorten the distance to your
target.
• Obstacles in the way. • Move the obstacles.
Guns are not
functioning
correctly.
• Battery Low (3 Lives ash-
ing at the same time)
• Replace the batteries.
• Excess Glare • Move to a new location.
• Interference from other
infrared devices
• Avoid using other infrared
devices whilst playing.
Projection Picture
is not clear.
• The ambient light is too
bright
• Close a curtain or turn o
any lights.
• The display is not focused. • Follow the projector setup
instructions on page 6 to
focus.
• Batteries are Low. • Replace the batteries.
The projector
targets cannot
be hit.
• The projector is positioned
incorrectly.
• Follow the projector setup
instructions on page 6 to
place correctly.

WARRANTY
Warranty Information
Think Gizmos, Unit 19, Lawson Hunt Industrial Park,
Broadbridge Heath, West Sussex, RH12 3JR
Tel.: [phone]
[email protected] ●www.thinkgizmos.com
What is Covered:
This warranty covers any defects in materials or workmanship, with the exceptions stated
below.
How Long Coverage Lasts:
This warranty runs for 2 Year from the date your Image Projecting Laser Gun Set is
delivered.
What is not covered:
Any problem that is caused by abuse, misuse, or an act of God (such as a ood) are not
covered.
What We Will Do:
If the Product proves defective during the warranty period, we will provide you with the
instructions for the return, and we will take one of the following actions: (i) replace the
Product with a product that is the same or equivalent to the Product you purchased; (ii)
repair the Product; or (iii) refund to you the whole of or part of the purchase price of the
Product.
How To Get Service:
To obtain instructions on how to obtain service under this warranty, contact our customer
service by phone or email. You will nd the contact details of our customer service below.
Customer service may ask you questions to determine your eligibility under this warranty,
and if you are eligible you’ll be given instructions for returning the defective Product. If
we send you a replacement or repair your Product, we will pay the cost of delivering the
replacement or repaired Product to you.
Do not return the item to the original place of purchase, please contact Think
Gizmos direct.
10

“CE” marking states that the product is compliant to European Directives
2014J35/EU Low Voltage Directive (LVD)
2004/108/EC EMC Directive
It is possible to request a full copy of Declaration of compliance from the Distributor:
This product complies with the rules of RoHS Directive(2011/651EU)
This product complies with the rules of EuP Directive(2009/125/EC)
Think Gizmos is a registered trademark of Paramount Zone Ltd.
www.thinkgizmos.com
Think Gizmos brand is owned and operated by Paramount Zone Ltd.
Manufactured and Distributed by:
Paramount Zone Limited,
Unit 19, Lawson Hunt Industrial Park,
Horsham, Sussex, RH12 3JR, UK.
EU Representative Address:
Paramount Zone Ireland Limited
Lee View House, 13 South Terrace,
Cork, T12T0CT, Ireland
Meaning of the ‘Dustbin’ Symbol:
To protect our environment, do not dispose of electrical equipment in with domestic waste.
Please return any electrical equipment that you will no longer use to the collection points
provided for their disposal.
This helps to avoid the potential eects of incorrect disposal on the environment and human
health.
This will contribute to the recycling and other forms of reutilisation of electrical and electronic
equipment.
Information concerning where the equipment can be disposed of can be obtained from your
local authority.