Thinklogical VelocityKVM VTM-004200 User manual

thinklogical®
T-Series DVI Modules, Rev. G 2 October, 2016
thinklogical®
Copyright Notice
Copyright © 2016. All rights reserved. Printed in the U.S.A.
Thinklogical, LLC®
100 Washington Street
Milford, Connecticut 06460 U.S.A.
Telephone: [phone]
All trademarks and service marks are property of their respective owners.
Subject: VelocityKVM T-Series DVI Modules Product Manual
Revision: G, October 2016
T-Series Chassis
& Modules
®
Website: www.thinklogical.com
Facebook: www.facebook.com/ThinklogicalUSA
LinkedIn: www.linkedin.com/company/thinklogical
Google+: http://plus.google.com/u/0/109273605590791763795/about
YouTube: www.youtube.com/user/thinklogicalNA
Twitter: @thinklogical

thinklogical®
T-Series DVI Modules, Rev. G 3 October, 2016
Table of Contents
PREFACE......................................................................................................................................................................4
Conventions Used in this Manual...............................................................................................................................4
1. SYSTEM FEATURES................................................................................................................................................5
1.1 T-Series DVI Modules.......................................................................................................................................5
1.2 Contents............................................................................................................................................................6
1.2.1 Video Cables...............................................................................................................................................6
1.2.2 Peripheral cables........................................................................................................................................6
2. CONNECTING VelocityKVM T-SERIES EXTENDERS............................................................................................7
2.1 Transmitter Modules .......................................................................................................................................7
2.2 Receiver Modules.............................................................................................................................................7
2.3 Module LEDs ....................................................................................................................................................8
2.4 Fiber Optic Cables ...........................................................................................................................................8
2.5 Installation........................................................................................................................................................8
Rear Panel Views.............................................................................................................................................9
2.6 Set-Up ...............................................................................................................................................................9
Dry Contact Alarm...........................................................................................................................................9
Firmware Upgrades.........................................................................................................................................9
2.7 T-Series Application Diagrams.....................................................................................................................10
2.7.1 VTM Transmitters to VelocityKVM Receivers (through 2 VX160 Routers) ......................................10
2.7.2 VelocityKVM Transmitters to VTM Receivers (through a VX160 Router) ........................................10
2.7.3 Dual-Link DVI: VTM-8 Transmitters to VTM-8 Receivers (through 2 VX160 Routers).....................11
2.7.4 T-Series Transceiver Configuration (through a VX160 Router)........................................................11
2.8 Technical Specifications................................................................................................................................12
2.9 Velocity Unbalanced Audio Specifications...................................................................................................13
3. REGULATORY & SAFETY COMPLIANCE............................................................................................................13
3.1 Safety Requirements......................................................................................................................................13
Symbols Found on the Product ......................................................................................................................13
Regulatory Compliance....................................................................................................................................13
North America...................................................................................................................................................13
Australia & New Zealand..................................................................................................................................14
European Union................................................................................................................................................14
Declaration of Conformity..........................................................................................................................14
Standards with Which Our Products Comply ................................................................................................14
3.2 Supplementary Information...........................................................................................................................14
Product Serial Number.....................................................................................................................................15
Connection to the Product...............................................................................................................................15
4. HOW TO CONTACT US..........................................................................................................................................15
4.1 Customer Support..........................................................................................................................................15
Website..............................................................................................................................................................16
Email..................................................................................................................................................................16
Telephone..........................................................................................................................................................16
Fax .....................................................................................................................................................................16
4.2 Product Support .............................................................................................................................................16
Warranty ...........................................................................................................................................................17
Return Authorization........................................................................................................................................17
Our Addresses .................................................................................................................................................17
APPENDIX A: Quick Start Guides.............................................................................................................................18
A.1 VTM-24 Transmitters to VTM-24 Receivers (direct)...................................................................................18
A.2 VTM-4/VTM-24 Tx to VTM-4/VTM-24 Rx (through VX80 Router)...............................................................19
A.3 VTM-4/VTM-8 Tx to Vel-4/Vel-8 Rx (through VX40 Router).......................................................................20
APPENDIX B: Thinklogical KVM Extenders- Theory of Operation ........................................................................21
APPENDIX C: VelocityKVM T-Series Standard Model Ordering Information........................................................22
APPENDIX D: VelocityKVM T-Series Multi-Path and Separate-Path Model Ordering Information .....................23

thinklogical®
T-Series DVI Modules, Rev. G 4 October, 2016
PREFACE
Conventions Used in this Manual
Throughout this manual you will notice certain symbols that bring your attention to important information.
These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation point
symbol, as shown here.
A note is meant to call the reader’s attention to helpful information at a point in the text that is relevant
to the subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red
stop sign, as shown here.
A warning is meant to call the reader’s attention to critical information at a point in the text that is
relevant to the subject being discussed.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!
The VelocityKVM T-Series VTM-24 Transmitter Module: VTM-U00024-LCTX

thinklogical®
T-Series DVI Modules, Rev. G 5 October, 2016
1.T-Series DVI Modules
The Logical Solution: Modular KVM Extension/DVI and SDI Support in One Unit
The VelocityKVM line of extenders continues to evolve and add value with exciting new capabilities. The
VelocityKVM T-4200 is housed in a high reliability, rack-space-saving chassis that includes all of the
same capabilities in a 1U device that used to require 2U. Featuring a dual interface and current sharing
power supplies, each 1U chassis supports two separate interface modules, allowing users to combine
module options within one chassis.
Each T-Series module (VTM- prefix) is also available in a Desktop version (VDM- prefix) that fits into our
Velocity Desktop Chassis, which features a single power supply housed in a 1U chassis designed to
accommodate any one module from our Desktop line.
Available modules support a variety of video display options and all modules support PS2, full duplex
stereo audio (unbalanced), stereo emitter, serial (RS-232), USB 2.0 (up to 480 Mbps) and/or USB 1.0
HID. Modules that support Multi Video Paths, Separate Audio Paths and Separate Data Paths are
also available. (See Appendixes C and D on pages 22 and 23.)
Using multi-mode or single-mode fiber, the system allows users to securely locate a display device and
peripherals up to 40 kilometers away from the controlling computer without loss of resolution.
In addition, all high speed peripherals function with no latency, making it ideally suited for a wide range
of applications in the broadcast and post-production field, command and control centers, universities, air
traffic control, energy production and exploration, and most other commercial KVM applications.
1.1 T-Series Module Features

thinklogical®
T-Series DVI Modules, Rev. G 6 October, 2016
1.2 Contents
When you receive your Thinklogical®VelocityKVM T-Series or Desktop Series Extender System, you
should find the following items:
VelocityKVM T-4200 Modular Chassis w/ dual Power Supply Modules
-OR-
VelocityKVM Desktop Modular Chassis w/ single Power Supply Module
VelocityKVM Desktop
Modular Chassis
VED-000001
VelocityKVM T-Series or Desktop Extender Module(s): Transmitter/Receiver/Transceiver
AC power cord(s), PWR-000006-R (International connections may differ) –Qty 1 or 2
VelocityKVM Extender Cables:
Video Cable, 2 Meters –See Technical Specifications, pg. 12
Audio Cable Kit (8 pcs., para. 1.2.2 below), 6 Feet, KIT-000005-R –Qty 1
VelocityKVM T-4200 or Desktop Extender Product Manual CD
Product Quick Start Guide
Video Cables
Single-link: DVI-D Male Cable, 2 Meters (CBL000009-002MR)
DVI Male DVI Male
Peripheral Cables
KIT-000005-R Audio Cable Kit (8 pcs.)–Qty 1
2 each –6 pin mini din (6’)
2 each –USB A-B (6’)
2 each –3.5mm to 3.5mm plug (6’)
1 each –DB9M to DB9F (6’)
1 each –BNC male to male, 50 Ω (6’)

thinklogical®
T-Series DVI Modules, Rev. G 7 October, 2016
2.Connecting VelocityKVM T-Series Extenders
All physical connections to the product use industry-standard connectors. Non-supplied cables
are commercially available. All connections are found on the rear of the unit.
2.1 Transmitter Modules
The Transmitter Module connects to the CPU (or other sources) using the supplied cables listed above.
The Transmitter then connects to the Receiver via multi-mode or single-mode fiber-optic cables. (See
paragraph 2.8 Technical Specifications on page 12, for details about specific optical distances using
various fiber types.)
USB 2.0 Port
Control Download
Device Download
PS2 Kybd. from CPU
USB HID Port
PS2 Mouse from CPU
RS-232 Serial Port (F)
Audio IN
Audio OUT
3D Stereo IN
DVI Video 2
IN
DVI Video 1
IN
L1: Video 1 & Data Tx to Rx
L2: Data Rx to Tx
L3: Video 2
VTM-24 Multi-Mode Transmitter
Fiber Optic Ports
Fiber Connection/
Alarm LEDs
USB 2.0 Link/Host
Indicator LEDs
2.2 Receiver Modules
The Receiver Module receives video and KVM data from the Transmitter via multi-mode or single-mode
fiber-optic cables. The Receiver’s output ports connect to the destination peripheral devices with their
own standard cables.
Host Download
PS2 to Keyboard
USB HID Ports (4)
Audio IN
DVI Video 2
OUT
DVI Video 1
OUT
L1: Video 1 & Data Tx to Rx
L2: Data Rx to Tx
L3: Video 2 3D Stereo
OUT
USB 2.0 Ports (4)
Control Download
PS2 to Mouse
RS-232 Serial Port (M)
Audio OUT
VTM-24 Multi-Mode Receiver
Fiber Optic Ports
Fiber Connection/
Alarm LEDs USB 2.0 Link/Device
Indicator LEDs

thinklogical®
T-Series DVI Modules, Rev. G 8 October, 2016
2.3 Module LEDs
Both the Transmitter and Receiver Modules feature five LEDs. Their functions are as follows:
2.4 Fiber Optic Cable
Fiber optic cables connect the Transmitters to the Receivers. Standard multi-mode fiber optic cables
must be 50 or 62.5 microns, terminated with LC type fiber optic connectors. Be careful not to kink or
pinch the fiber optic cable as it is being installed and keep all bend diameters to no less than 3
inches (76.2mm).
Standard multi-mode fiber optic cable (up to 1000 meters),
50 or 62.5 microns, terminated with LC-type connectors
◄Transmit◄Receive
With two fibers connected (in models with one SFP) or with three fibers connected (in models with two
SFPs) video information is transmitted from the TX to the RX over fiber L1 (and L3 in models with two
SFPs). Fiber L2 is used as a data return path from the RX to the TX, allowing full duplex, bi-directional
RS-232 data transfer.
2.5 Installation
All physical connections to the product use industry-standard connectors. Non-supplied cables are
commercially available. All connections are found on the rear of the unit.

thinklogical®
T-Series DVI Modules, Rev. G 9 October, 2016
Rear Panel Views
T-4200 as a Transciever (Single-Link, 1 DVI Display)
VTM-4 Tx VTM-4 Rx
T-4200 as 2 Receivers (Dual-Link DVI & Single-Link RGB Displays)
VTM-5 RxVTM-8 Rx
VTM-24 Tx VTM-24 Rx
T-4200 as a Transceiver (Single-Link, 2 DVI Displays)
T-4200 as 2 Transmitters (Dual-Link DVI & Single-Link RGB Displays)
VTM-5 TxVTM-8 Tx
A selection of Velocity T-4200 Rear Panels in Transceiver, Receiver & Transmitter Configurations
2.6 Set-Up
Dry Contact Alarm
Dry contact alarms are located on the transmitter and receiver units. When there is an alarm condition
the relay is energized. An example of possible alarm causes might be over-temperature or a power
supply issue.
NORMALLY CLOSED NORMALLY OPEN
COMMON
ALARM
The dry contact alarm is a Form C contact with the following ratings:
Nominal Switching Capacity:1 A 30 VDC
Max. Switching Power: 30 W DC
Firmware Upgrades
Firmware upgrades are available through Thinklogical. Please call 1-203-647-8700 for assistance.
.

thinklogical®
T-Series DVI Modules, Rev. G 10 October, 2016
2.7 T-Series Application Diagrams
2.7.1Two Source Computers connected to one VelocityKVM T-4200 Chassis equipped with one VTM-4 TX and
one VTM-24 TX, which extends video and peripheral signals to two separate VelocityKVM (stand alone)
Receivers (VelocityKVM-4 and VelocityKVM-24) at two separate workstations. Signals are routed through two
Thinklogical VX160 Routers
2.7.2Two Source Computers, each connected to a VelocityKVM-24 (stand alone) Transmitter extending video
and peripheral signals to one VelocityKVM T-4200 Chassis equipped with two VTM-24 RX Modules. The VTM-
24s extend to two separate workstations. Signals are routed through a Thinklogical VX160 Router.

thinklogical®
T-Series DVI Modules, Rev. G 11 October, 2016
2.7.3Two Source Computers, each connected to a VTM-8 Dual-Link DVI Transmitter extending dual-link video
and peripheral signals to two VelocityKVM-8 Dual-Link DVI Receiver workstations. Signals are routed through
two Thinklogical VX160 Routers.
2.7.4 Two Source Computers, located at separate workstations, connected to one VelocityKVM T-4200
Transceiver Chassis equipped with dual VTM-24 Modules (one TX and one RX), which extends video and
peripheral signals to two separate VelocityKVM-24 (stand alone) destinations (one TX and one RX) at separate
workstations. Signals are routed through a Thinklogical VX160 Router.

thinklogical®
T-Series DVI Modules, Rev. G 12 October, 2016
2.8 Technical Specifications
Each Thinklogical VelocityKVM T-Series Module is designed to the following specifications:
Copper Connectors
Transmitter:
Video (2) DVI-D
Audio MIC/Line 3.5mm Jack
Serial Port DB9 Female
USB 2.0 USB B
PS2 Keyboard MiniDIN 6 Female
PS2 Mouse MiniDIN 6 Female
Firmware Updates USB B (3)
Fiber Connectors LC
Receiver:
Video (2) DVI-D
Audio MIC/Line 3.5mm Jack
Serial Port DB9 Male
USB 1.1 USB A (4)
USB 2.0 USB A (4)
PS2 Keyboard MiniDIN 6 Female
PS2 Mouse MiniDIN 6 Female
Firmware Updates USB B
Fiber Connectors LC
Optical Cable
Fiber Type: 50 or 62.5 micron, Multi-mode
Required (per module): 2 or 3, depending upon application. (Not supplied)
Optical Distance
Up to 65 meters with Type OM1
Up to 350 meters with Type OM2
Up to 650 meters with Type OM3
Up to 1000 meters with Type OM4
Operating Temp
and Humidity
0° to 50°C (32° to 122 °F), 5% to 95% RH, non-condensing
Dimensions
Height: 1.65” (41.91 mm) ± .039”; .1 mm
Depth: 6.366” (161.70 mm)* ± .039”; .1 mm
Width: 7.226” (183.54 mm) ± .039”; .1 mm
Supply Voltage
100-240 VAC, 47-63 Hz, Universal AC power supply
Power Consumption
10 Watts per module
Compliance
Approvals for US, Canada, and European Union
Warranty
Twelve months from date of shipment. Extended warranties available.

thinklogical®
T-Series DVI Modules, Rev. G 13 October, 2016
2.9 Velocity Unbalanced Audio Specifications
VELOCITY UNBALANCED AUDIO SPECIFICATIONS
AUDIO SAMPLING RATE:46.875kHz
TRANSMITTER:
Line In Impedance: 10kΩ
Line In (max): 2.5V p/p (0.884Vrms, 1.15dBu)
Mic Out Impedance: 300Ω
Mic Out (max): 0.45V p/p (0.159Vrms, -13.75dBu)
RECEIVER:
Line Out Impedance: 560Ω
Line Out (max) into 1K ohms: 3V p/p (1.06Vrms, 2.72dBu)
Mic In Impedance: 5kΩ
Mic In (max) : 0.24V p/p (0.085Vrms, -19.2dBu)
3. Regulatory & Safety Compliance
3.1. Safety Requirements
Symbols found on the product
Markings and labels on the product follow industry-standard conventions. Regulatory markings
found on the products comply with domestic and many international requirements.
Regulatory Compliance
Thinklogical’s®products are designed and made in the U.S.A. These products have been tested
by a certified testing laboratory and found to be compliant with the following standards (both
domestic USA and many international locations):
North America
Safety
ANSI/UL60950-1: 1
st
Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
CENELEC EN 60950-1, 1
st
Edition (2001)
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
IEC60825:2001 Parts 1 and 2
Class 1 LASER Product
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference,
in which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Manufacturer’s Name & Address: Thinklogical, LLC®
100 Washington Street
Milford, Connecticut 06460 USA

thinklogical®
T-Series DVI Modules, Rev. G 14 October, 2016
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the
EMC Directive 89/336/EEC.
Standards with Which Our Products Comply
Safety
CENELEC IEC 600950-1 2nd Ed. 2005
Electromagnetic Emissions
EN55022: 1994 (IEC/CSPIR22: 1993)
EN61000-3-2/A14: 2000
EN61000-3-3: 1994
Electromagnetic Immunity
EN55024: 1998 Information Technology Equipment-Immunity Characteristics
EN61000-4-2: 1995 Electro-Static Discharge Test
EN61000-4-3: 1996 Radiated Immunity Field Test
EN61000-4-4: 1995 Electrical Fast Transient Test
EN61000-4-5: 1995 Power Supply Surge Test
EN61000-4-6: 1996 Conducted Immunity Test
EN61000-4-8: 1993 Magnetic Field Test
EN61000-4-11: 1994 Voltage Dips & Interrupts Test
3.2. Supplementary Information
The following statements may be appropriate for certain geographical regions and might not
apply to your location.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil num
é
rique de la classe A respecte toutes les exigencies du R
è
glement sur le mat
é
rial brouilleur du Canada.
Warning! This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take corrective
measures.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications in which case the user may be required to take adequate
corrective measures at their own expense.
Note: This Class A digital apparatus complies with Canadian ICES-003 and has
been verified as being compliant within the Class A limits of the FCC Radio
Frequency Device Rules (FCC Title 47, Part 15, Subpart B CLASS A), measured to
CISPR 22: 1993 limits and methods of measurement of Radio Disturbance
Characteristics of Information Technology Equipment.
Note: The user may notice degraded audio performance in the presence of
electro-magnetic fields .

thinklogical®
T-Series DVI Modules, Rev. G 15 October, 2016
Product Serial Number
Thinklogical products have a unique serial number, which includes a date-code, printed on an
adhesive label that is affixed to the unit. The format for the date-code is 2 digits for the month,
dash, 2 digits for the year, plus at least four digits for a unique unit number. For example:
05-160127indicates the unit was built in the 5th month of 2016, and is unit number 127.
Connection to the Product
Connections and installation hardware for our products use industry-standard devices
and methods. All wiring connections to the customer equipment are designed to minimize
proprietary or customized connectors and cabling. Power connections are made with regionally
appropriate power cords and approved methods.
4. How to Contact Us
4.1. Customer Support
Thinklogical®is an engineering company and we will always do our best to ensure that you
receive any assistance you need directly from our most knowledgeable engineers.
We believe that the first line of support comes from the design
engineers that developed each particular product.
Therefore, your questions or issues will be handled promptly by our in-house engineers who are most
familiar with your products. We won’t be satisfied until you are satisfied.
Thank you for choosing Thinklogical® products for your application.
We appreciate your business and are dedicated to helping you successfully use our products.
is always here to help you.
To contact us, please use the following telephone numbers and internet-based methods:
®
Website
Check out our website for current product offerings, support information and general information
about all of the products we offer.
Our internet website offers product information on all current systems, including technical
specification sheets and installation guides (for viewing online or for download), product
diagrams showing physical connections and other information you might need.
Internet: www.thinklogical.com
Note: Most online documents are stored as Adobe Acrobat “PDF” files. If you do
not have the Adobe Acrobat reader needed to view PDF files, visit www.adobe.com
for a download.

thinklogical®
T-Series DVI Modules, Rev. G 16 October, 2016
Email
Thinklogical®is staffed Monday through Friday from 8:30am to 5:00pm, Eastern Time Zone.
We will do our best to respond to your email inquiries promptly. Please use the following email
addresses:
[email protected] –Information on Thinklogical®and our products.
[email protected] –Sales Department - orders, questions or issues.
[email protected] –Product support, technical issues or questions, product
repairs and request for Return Authorization.
Telephone
Thinklogical Operator 1-203-647-8700
Product & Customer Support: 1-203-647-8798
US Commercial & Canada Sales: 1-203-647-8715
US Federal Government Sales: 1-203-647-8716
Toll Free in the Continental US: 1-800-291-3211
International Sales (Europe, Middle East, Africa): 1-203-647-8704
International Sales (Asia Pacific, Central & Latin America): 1-203-647-8734
Please contact our expert sales staff in Milford, CT. We are here Monday through Friday from
8:30am to 5:00pm, Eastern Time Zone. We’ll provide a representative’s direct dial phone
number when you call.
If leaving a voice message, please provide a preferred time to call back so we may reach you at
your convenience.
Our switchboard attendant will direct your call during regular business hours. We have an
automated attendant answering our main telephone switchboard after regular business hours
and holidays. Please leave voice messages for individuals at any time.
Fax
Our company facsimile number is 1-203-783-9949. Please indicate the nature of the fax on your
cover sheet and provide return contact information.
4.2. Product Support
Thinklogical’s®support personnel are available Monday through Friday from 8:30am to
5:00pm, Eastern Time Zone. If your application requires assistance at some time outside of our
normal business hours, please contact us beforehand and we will do our best to make
arrangements to help you with your Thinklogical®products.
Warranty
Thinklogical, LLC®warrants this product against defects in materials and workmanship for a
period of one year from the date of delivery. Thinklogical, LLC®and its suppliers disclaim any
and all other warranties.
Note: Thinklogical, LLC®products carry a one year warranty, with longer term
available at time of purchase on most products. Please refer to your product
invoice for your products Warranty Terms & Conditions.

thinklogical®
T-Series DVI Modules, Rev. G 17 October, 2016
Defect remedy shall be the repair or replacement of the product, provided that the defective
product is returned to the authorized dealer within a year from the date of delivery.
If you wish to return your device, contact the Thinklogical, LLC®authorized dealer where you
purchased the device, or if you purchased directly, call Thinklogical, LLC®at 1-800-291-3211
(USA).
Return Authorization
If you need to return your Thinklogical®product to us for any reason, please get a
Return Merchandise Authorization Number (RMA#)
from Thinklogical’s Product Support Department (1-203-647-8700) before sending the unit in.
In the event you must return a product to Thinklogical®directly, please contact Customer
Support at 1-800-291-3211 or 1-203-647-8700. Customer Support will ask you to describe the
problem and will issue you a Return Merchandise Authorization number (RMA#). Pack the
device in its original box, if possible, and return it with the RMA# printed on the outside of the
box.
Note: DO NOT return a product to Thinklogical®without a Return Merchandise
Authorization.
Our Addresses
If you have any product issues or questions or need technical assistance with your Thinklogical®
system, please call us at 1-800-291-3211 (USA only) or 1-203-647-8700 and let us help. If you
need to write us or return a product, please use the following address: Return address for
products with Return Merchandise Authorization: Thinklogical, LLC®
Attn: RMA#
100 Washington Street
Milford, CT 06460 USA
Website: www.thinklogical.com
Facebook: www.facebook.com/ThinklogicalUSA
LinkedIn: www.linkedin.com/company/thinklogical
Google+: http://plus.google.com/u/0/109273605590791763795/about
YouTube: www.youtube.com/user/thinklogicalNA
Twitter: @thinklogical

thinklogical®
T-Series DVI Modules, Rev. G 18 October, 2016
Appendix A- Quick Start Guides
A.1 VTM-24 Transmitters to VTM-24 Receivers (direct)

thinklogical®
T-Series DVI Modules, Rev. G 19 October, 2016
A.2 VTM-4/VTM-24 Tx to VTM-4/VTM-24 Rx (through VX80 Router)
Local
DVI OUT
Module 1 DVI OUT 1
(DDC)
Module 1
DVI OUT 1
Module 2
DVI IN 1
Module 2
DVI IN
Module 1
Source
CPU 1
L1: Data TX to RX and Video L2: Data RX to TX
External Control CPU
Network Hub
STEP 8: Connect the Controller Cards’ LAN Ports to your Controller CPU with CAT5 cables. (CPU IP address: 192.168.13.9)
8
Optional Secondary Controller Card
IP address: 192.168.13.16
Primary Controller Card
IP Address: 192.168.13.15
QUICK-START GUIDE
QUICK-START GUIDE
As used with Thinklogical’s
T-4200 Video Extension System STEP 1: Connect your VTM Receiver Modules to the
VX80 using multi-mode fiber-optic cables (up to 1000 meters). Connect L1 to any Transmit Port and L2 to the same numbered Receive Port. Connect L3 to any other Transmit Port. STEP 2: Install the Right Power Supply Module AC Power Cord (Left receptacle) and the Left Power Supply Module AC Power Cord (Right receptacle). Plug both Receiver AC Cords into a standard AC source. On the front of the chassis, turn ON the Right and Left Power Supply Modules.
2
3STEP 3: For each module,
connect a monitor to each of the DVI OUT ports with a standard DVI cable. Connect the required peripheral devices with standard copper cables and turn them all ON.
STEP 4: Connect your VTM Transmitter Modules to the VX80
using multi-mode fiber-optic cables (up to 1000 meters).
Connect L1 to any Receive Port and L2 to the same numbered
Transmit Port. Connect L3 to any other Receive Port.
4
5
STEP 5: Ensure the Power Supply Switches on the front panel are in the OFF position. Install the Right Power Supply Module AC Power Cord (Left receptacle) and the Left Power Supply Module AC Power Cord (Right receptacle). Plug both Transmitter AC Cords into a standard AC source. Turn ON the Right and Left Power Supply Modules. STEP 6: Connect the DVI IN cables from the Source CPUs to the DVI IN ports of each Transmitter Module. If desired, connect a local monitor to the Vel-3 Transmitters’ DVI OUT port with a standard DVI cable. Connect the peripheral devices from the CPU to the Transmitters with standard copper cables. Ensure the CPU is turned ON. STEP 7: If stereo 3-D molecular visualization on your desktop is desired, connect the Stereo OUT from the CPU to the Transmitter Module’s STEREO INPUT. Connect a 3-D Active Stereo Emitter to the STEREO OUT receptacle on the Receive module.
STEP 9: Connect both supplied AC Power Cords (PWR- 0000006-R) to the receptacles located on the VX80's power supplies. Plug each one into a standard AC source. Verify that all system functions are operating properly.
VTM-4_VTM-24_VX80_QSG_Manual
VTM-4 Transmitter Module VTM-U00004-LCTX
KVM Matrix Switch
Powered by MRTS Technology
VX80
router
To LAN Ports
Stereo Emitter OUT
Mod. 1
Stereo 3-D ◄Audio IN Audio OUT► USB
DVI IN 2 Module 2
PS2 Mouse PS2 Keyboard
◄Audio IN Audio OUT► USB PS2 Mouse PS2 Keyboard
Stereo 3-D
Source CPU 2
DVI OUT 2
Module 1 DVI OUT 2
Module 2
Stereo Emitter OUT
Mod. 2
VTM-4 Receiver Module VTM-U00004-LCRX
1
Keyboard and Mouse to PS2 or USB HID Ports
Keyboard and Mouse to PS2 or USB HID Ports
L1: Data TX to RX and Video 1 L2: Data RX to TX L3: Video 2
6
77
7
7
With VTM-4 and VTM-24 Transmitter and Receiver Modules
VTM-24 Transmitter Module VTM-U00024-LCTX VTM-24 Receiver Module
VTM-U00024-LCRX
9

thinklogical®
T-Series DVI Modules, Rev. G 20 October, 2016
A.3 VTM-4/VTM-8 Tx to VTM-4/VTM-8 Rx (through VX40 Router)
Local
DVI OUT
Module 1
DVI IN
Dual-Link
Module 2
DVI IN
Module 1
Source CPU 1
Network Hub
STEP 8: Connect the VX40 Controller Cards’ LAN Ports to your Controller CPU with CAT5 cables. (CPU IP address: 192.168.13.9)
Optional Secondary Controller Card
IP address: 192.168.13.16
Primary Controller Card
IP Address: 192.168.13.15
STEP 1: Connect your VelocityKVM Single-Link and Dual-Link Receivers to the VX40 using multi-mode fiber-optic cables (up to 1000 meters). Connect L1 to any Transmit Port and L2 to the same numbered Receive Port. Connect the VelocityKVM-8 Receiver’s L3 to any other Transmit Port. STEP 2: Ensure that each VelocityKVM Receiver’s ON/OFF switch is in the OFF (0) position. Insert the AC power cord into the Receiver and plug it into a standard AC source. Turn the unit ON. STEP 3: Depending on your configuration, connect your peripheral devices (monitors, keyboard, mouse, etc.) to the VelocityKVM Receivers using standard cables as shown in the examples below. Turn all the devices ON.
STEP 4: Connect your VTM Transmitter Modules to the VX40
using multi-mode fiber-optic cables (up to 1000 meters).
Connect L1 to any Receive Port and L2 to the same numbered
Transmit Port. Connect VTM-8's L3 to any other Receive Port.
STEP 5: Install the Right Power Supply Module AC Power Cord (Left receptacle) and the Left Power Supply Module AC Power Cord (Right receptacle). Plug both Transmitter AC Cords into a standard AC source. On the front of the chassis, turn ON the Right and Left Power Supply Modules. STEP 6: Connect the DVI IN cables from the Source CPUs to the DVI IN ports of each Transmitter Module. If desired, connect a local monitor to the Transmitters’ DVI OUT port with a DVI cable. Connect the peripheral devices from the CPU to the Transmitters with standard copper cables. Ensure the CPUs are turned ON. STEP 7: If stereo 3-D molecular visualization is desired, connect the Stereo OUT from the CPU to the Transmitter Module’s STEREO INPUT. Connect a 3-D Active Stereo Emitter to the STEREO OUT receptacle on the Receive.
STEP 9: Connect both supplied AC Power Cords (PWR- 0000006-R) to the receptacles located on the VX40's power supplies. Plug each one into a standard AC source. Verify that all system functions are operating properly.
VTM-4Tx_VTM-8Tx_VX40_Vel-4Rx_Vel-8Rx_QSG_Manual
VTM-4 Transmitter (Module 1) VTM-U00004-LCTX
Powered by MRTS Technology
To LAN Ports
Stereo 3-D ◄Audio IN Audio OUT► USB HID PS2 Mouse PS2 Keyboard
◄Audio IN Audio OUT► USB HID PS2 Mouse PS2 Keyboard
Stereo 3-D
Source CPU 2
Stereo Emitter OUT
VelocityKVM-4 Receiver 1 VEL-U00M04-LCRX
1
Keyboard and Mouse to PS2 or USB HID Ports
L1: Data TX to RX and Video Primary L2: Data RX to TX L3: Video Secondary
VTM-8 Transmitter (Module 2) VTM-U00008-LCTX
Local
DVI OUT Dual-
Link Module 2
External Control CPU
Keyboard and Mouse to
PS2 or USB HID Ports
DVI OUT (DDC)
Rx 1 DVI OUT
Rx 1
DVI OUT (DDC)
Dual-Link Rx 2
DVI OUT
Dual-Link Rx 2
Stereo Emitter OUT
USB 2.0 OUT
USB 2.0 OUT
VelocityKVM-8 Receiver 2 VEL-U00M08-LCRX
1
2
2
3
3
4
5
66
778
9
7
7
Complete steps 1 through 9 to connect to the VX40 KVM Matrix Switch
L1: Data TX to RX and Video L2: Data RX to TX
T-4200 VTS-004200
VX40 Router KVM Matrix Switch Chassis, 6 Rack Units, 400 Watts
QUICK-START GUIDE
QUICK-START GUIDE
As used with Thinklogical’s®T-4200
Video Extension System
As used with Thinklogical’s®T-4200
Video Extension System
With VTM Transmitter Modules and VelocityKVM Receivers
With VTM Transmitter Modules and VelocityKVM Receivers
KVM Matrix Switch
VX40
router