thomann Harley Benton BEQ-1 User manual

BEQ-1
effects pedal
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
23.07.2015, ID: 114562

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety instructions..................................................................................................................................... 6
3 Features.......................................................................................................................................................... 9
4 Instructions for use................................................................................................................................. 10
5 Components and functions................................................................................................................ 11
6 Technical specifications....................................................................................................................... 15
7 Protecting the environment.............................................................................................................. 16
Table of contents
BEQ-1
3

1 General notes
This user manual contains important information on safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to other users, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section provides an overview of the symbols and signal words used in this user manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Symbols and signal words
General notes
effects pedal
4

Warning signs Type of danger
Warning – danger zone.
General notes
BEQ-1
5

2 Safety instructions
This device is intended to be used for sound processing of signals from musical instruments
with electromagnetic pickups. Any other use or use under other operating conditions is con‐
sidered to be improper and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
effects pedal
6

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety
Safety instructions
BEQ-1
7

NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Safety instructions
effects pedal
8

3 Features
nFloor effects pedal with 7-band graphic EQ, designed for bass
nVoltage supply by 9 V battery or power adaptor
nRobust metal housing
Features
BEQ-1
9

4 Instructions for use
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Handle the device with care.
Do not try to disassemble or repair the device yourself in the unlikely event that it does not
work.
Do not use solvents such as alcohol to clean the device.
Instructions for use
effects pedal
10

5 Components and functions
1 Connector for an optional 9 V power adaptor. If a 9 V power adaptor is used, the
battery is automatically disconnected from the circuitry.
2 The LED ‘CHECK’ lights up when the effects pedal is active. If the LED is not lit or just
glowing low during operation you have to replace the battery.
3LEVEL
This control adjusts the output level.
4 Graphic EQ, to raise or attenuate the centre frequencies 50 Hz, 120 Hz, 400 Hz,
500 Hz, 800 Hz, 4.5 kHz and 10 kHz by ±15 dB each.
5INPUT
1/4" phone socket for a standard instrument cable.
6Knurled-head screw to open the battery compartment. See details @
Ä ‘Changing
the battery’ on page 13.
Components and functions
BEQ-1
11

7 The foot switch toggles the effect on / off.
8OUTPUT
Output socket. Connect the output with a standard instrument cable to another
effects pedal or an amp.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
You can either use a 9 V battery or the DC 9 V connection for an external power supply. Before
connecting, check for correct polarity.
When you do not use the pedal unplug the instrument cable from the input jack. Otherwise,
the battery will be discharged.
Power supply
Components and functions
effects pedal
12

6 Knurled-head screw to open the battery compartment
7 Foot switch
9 Spring suspension
10 Coil spring
Changing the battery
Components and functions
BEQ-1
13

11 Battery cable
12 Battery clip for 9 V battery
13 9 V battery
14 Feed hole
15 Battery compartment
Before installing or replacing the battery disconnect the power adaptor from the wall outlet.
1. Loosen the knurled-head screw (6) on the pedal to open it.
2. Take the 9 V battery out of the battery compartment (15) and pull off the battery clip
(12) from the empty battery.
3. Put the battery clip (12) on the new battery (respecting the pole marking) and put it into
the battery compartment (15). Make sure that the battery cable (11) is not trapped in the
coil spring (10) or the pedal cover.
4. Press the coil spring (10) into the spring suspension (9) and close the battery compart‐
ment.
5. Insert the knurled-head screw (6) through the feed hole (14) and tighten the screw
securely.
Components and functions
effects pedal
14

6 Technical specifications
Input impedance 1 MΩ
Output impedance 1 kΩ
Current draw 22 mA
Operating voltage supply 9 V battery (6F22) / 9 V power adaptor
Dimensions (W × H × D) 72 mm × 128 mm × 60 mm
Weight 375 g
Technical specifications
BEQ-1
15

7 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose these materials with your normal household waste, but make sure that
they are fed to a recovery. Please follow the notes and markings on the packaging.
Batteries must not be disposed of as domestic waste or thrown into fire. Dispose of the bat‐
teries according to national or local regulations regarding hazardous waste. To protect the
environment, dispose of empty batteries at your retail store or at appropriate collection sites.
Disposal of the packaging mate‐
rial
Disposal of batteries
Protecting the environment
effects pedal
16

This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE). Do not dispose with your normal household waste.
Dispose this device through an approved waste disposal firm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Disposal of your old device
Protecting the environment
BEQ-1
17

Notes
effects pedal
18

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de