Thorlux Lighting SmartScan Touch Installation guide

21LFT32548 Issue 4 PN 3114D Nov 17
Max. 40m
*
* 922MHz Max. 10m
NOTE: Distance is reduced if walls are between
SmartScan Touch and Luminaires.
Max. 0.5m
SmartScan Touch
Regular, Teaching and Meeting Versions and ColourActive Touch
IP43
IP22
IP40
IP20
IP23
IP44
IP50
IP53
IP54
IP54
IP55
IP60
IP65
IP66
IP67
IP68
III
IP40
D
IK10
IP42
IP64
IP43
IP22
IP40
IP20
IP23
IP44
IP50
IP53
IP54
IP54
IP55
IP60
IP65
IP66
IP67
IP68
III
IP40
D
IK10
IP42
IP64
■The SmartScan Touch allows the user to control a group
of Smart luminaires.
■Simply touch the desired function.
■An indicator LED will highlight the current status.
■Wireless communications are disabled, therefore the
SmartScan Touch must be commissioned before use.
OPERATING INSTRUCTIONS
SMARTSCAN TOUCH AND COLOURACTIVE
DIMENSIONS
POSITIONING SMARTSCAN PROGRAMMING/TESTING
FUNCTIONS
INSTALLATION DETAILS
35
5
87
87
43.5
60 NOTE : Back box single gang
depth min. 45mm
N L
Mains
0.8Nm
Torque Max
Max. 1.5mm2
Function
AReturn to automatic
Function (Default Settings)
1Scene 1 - Smart luminaires to 50% xed
2Scene 2 - Smart luminaires to 25% xed
3Scene 3 - Smart luminaires OFF
Function
43000K colour temperature
54000K colour temperature
65000K colour temperature
76500K colour temperature
A
1
2
3
Regular
NOTE: After selecting a scene there is a delay of 3 seconds before an alternate
scene can be selected. A scene cannot be repeated within 15 seconds.
Teaching
A
1
2
3
Meeting
A
1
2
3
ColourActive
4
5
6
7

21LFT32548 Issue 4 PN 3114D Nov 17
NOTICE TO CONTRACTOR - PLEASE PASS THIS LEAFLET TO THE END-USER
MERSE ROAD NORTH MOONS MOAT
REDDITCH WORCS. B98 9HH ENGLAND
e-mail: thor[email protected].uk
Web: www.thorlux.com
☎[phone]
FM 10913 EMS 532104
Australia: www.thorlux.com.au ☎ [phone]
Deutschland: www.thorlux.de ☎ [phone]
Ireland: www.thorlux.ie ☎ [phone]
UAE: www.thorlux.ae ☎ [phone]
PROGRAMMING BUILDING ADDRESS AND GROUP ADDRESS
FUNCTION BUTTON DISPLAY
1Switch on the Smart Programmer
2Scroll to the <Smart TR>
<Smart TR> menu
3Select the menu download all
<Smart TR> <Smart TR only>
4Scroll to the building: 123
building setting address 1-254
To change the address press
the (Select) button. (A Star in the building: 123*
5upper corner indicates access of address 1-254
the program mode).
6Use the scroll buttons, to select building: 123*
the required address address 1-254
8Scroll to group group addr: 123
address address 1-254
12 Scroll to RF transmit rf transmit: en
enable/disable
Select this parameter. Option
9 name and current status are group addr: 123*
now displayed on the top line. address 1-254
To change between
13 enable and disable press rf transmit: en*
the (Select) button enable/disable
Now all parameters are memorised in the SmartScan Touch
(Please Note - each SmartScan Touch can have unique parameters if required)
10 Use the scroll buttons, to select group addr: 123*
the required address address 1-254
14 Use the scroll buttons, to select rf transmit: en*
the required function enable/disable
To exit the setting mode press
(Esc). The new selected value group addr: 123
12 will now be displayed on the address 1-254
rst line.
*RF Transmit - can be enabled or disabled from the Smart TR menu.
When disabled all radio transmissions are stopped.
NOTE: The SmartScan Touch does not support any other functions
from the programmer menu.
The (Send) button will now,
11 update the chosen parameter
in the SmartScan Touch
The (Send) button will now,
15 update the chosen parameter
in the SmartScan Touch
The (Send) button will now,
7update the chosen parameter
in the SmartScan Touch
PROGRAMMING
SmartScan Touch is programmed with the Smart Programmer.
This device uses bi-directional infrared to program the
SmartScan Touch. Ensure at all times, during use, only one
device can be “seen” by the programmer
DISPLAY
On the rst LCD line the actual menu point is displayed.
On the second line, the status line, the possible settings
for this menu point are shown. During a data transmission,
the actual transmission status (as well as any error
messages) is shown.
■Power : 4-o AA/1.5Vbattery (supplied)
PROGRAMMER
catalogue no. LCM 10777SS
✘
✔
Only one SmartScan device in view of the programmer
Thorlux products should not be modied. Any modication
may render the product unsafe and will invalidate any Safety/
Approval marks.
MODIFICATIONS
MAINTENANCE
The SmartScan Touch should not be subjected to undue
mechanical shock or extremes of temperature. Clean only with a
clean dry cloth.