Thrustmaster TX Racing Wheel Use and care manual

TX Racing Wheel
English: TX Racing Wheel - Manual firmware update procedure
(Windows 10/11)
Français : TX Racing Wheel - Procédure de mises à jour manuelle
du Firmware (Windows® 10/11)
Deutsch: TX Racing Wheel - Anleitung zur manuellen Aktualisierung
der Firmware (Windows 10/11)
Español: TX Racing Wheel - Procedimiento manual de actualización
del firmware (Windows 10/11)

Italiano: TX Racing Wheel - Procedura manuale per l'aggiornamento
del firmware (Windows 10/11)
Português: TX Racing Wheel - Procedimento de atualização manual
do firmware (Windows 10/11)
Nederlands: TX Racing Wheel - Procedure voor het handmatig
bijwerken van de firmware (Windows 10/11)
日本語 : TX Racing Wheel - ファームウェア手動アップデート手順
(Windows 10/11)
简体中文 : TX Racing Wheel - 手动执行固件更新程序 (Windows 10/11)
한국어 : TX Racing Wheel - 수동 펌웨어 업데이트 절차(Windows
10/11)

TX Racing Wheel - Manual firmware update procedure (Windows®
10/11)
System requirements: PC running Windows® 10 or later.
1) Connect your TX Racing Wheel to one of your PC’s USB ports
Please be sure to follow these instructions:
- The power connector must be properly connected at the back of the racing
wheel’s base.
- The power plug must be connected directly to a wall outlet.
oWe recommend that you avoid using an extension cord, power strip or
current transformer.
- The racing wheel must be connected directly to a USB port on your
oWe recommend that you avoid using a USB hub, USB extension cable
or any other type of connection extension.
Make sure that you have equipped your TX Racing Wheel with an add-on wheel rim
before you power on the racing wheel.
During this procedure:
−DO NOT CONNECT OR DISCONNECT your TX Racing Wheel before being
prompted to do so.
2) If you have not done so already, download and install the latest PC -
DRIVERS FORCE FEEDBACK driver on your PC. [Package 2023_TTRS_3]
You will find the latest driver for your device on our website, in the Drivers section:
https://support.thrustmaster.com/product/txracingwheel/
Restart your computer to finalize the update.

3) Verify the current firmware version of your TX Racing Wheel
The firmware version currently installed in your TX Racing Wheel can be viewed in
the Windows Control Panel.
a) On your keyboard, simultaneously press the Windows and Rkeys.
The Run window opens: type joy.cpl and then click OK
b) The Game Controllers window opens: select the name of your product
and click Properties.
Your TX Racing Wheel appears with the name Thrustmaster TX Racing
Wheel

Your racing wheel’s current firmware version appears in the upper right-hand section
of the Control Panel window. Firmware: 58.06 is the latest version currently
available.
4) If your racing wheel’s firmware version is earlier than 58.06:
You must update the firmware by continuing to follow this guide.
Firmware: 58.06

5) Open the firmware updater
Click inside the Windows search field with the magnifying glass icon, located on your
PC’s taskbar. Type Firmware Update and then click to open the application.
6) The Thrustmaster –Firmware Updater window appears onscreen.
- Device indicates the current firmware version in the device.
- Firmware indicates the firmware version that will be applied to the device.
Click OK to carry out the firmware update.
Thrustmaster TX Racing Wheel - Ver.: 58
Ver.: 58.06 – 31/03/2023 – TX_LM4F_v58_06.tmf

IMPORTANT: DO NOT DISCONNECT your racing wheel from the USB port
without being prompted to do so, and DO NOT UNPLUG the racing wheel’s
power supply during the firmware update!
Wait until the Firmware loading is complete: the Main Firmware progress bar must
be green all the way through.
The racing wheel self-calibrates (i.e. the wheel rim automatically rotates to the left
and right), and then its LED turns back on again.

The firmware updater program will then indicate whether the procedure has
completed successfully.
Then, click OK to return to the main window of the firmware updater.
7) Quit the program by clicking X (but not OK)
Thrustmaster TX Racing Wheel - Ver.: 58.06
Ver.: 58.06 – 31/03/2023 – TX_LM4F_v58_06.tmf

8) Once the firmware update is complete, verify that the device is working
properly in the Control Panel.
You are now ready to play!
Firmware: 58.06

TX Racing Wheel - Procédure de mise à jour manuelle du Firmware
(Windows® 10/11)
Système requis : PC avec Windows® 10 ou supérieur.
1) Connectez votre TX Racing Wheel au port USB de votre PC
Nous vous prions de bien suivre les instructions ci-dessous :
- Le connecteur d'alimentation doit être correctement inséré à l'arrière de la
base du volant.
- La prise de courant doit être directement branchée à une prise murale
oNous recommandons d'éviter l'utilisation de rallonge, de multiprise ou
de transformateur de courant
- Le volant doit être directement connecté à un port USB du PC
oNous recommandons d'éviter l'utilisation de HUB USB, de rallonge USB
et toute extension de branchement
Assurez-vous d’avoir équipé votre TX Racing Wheel d’une roue add-on avant de le
mettre sous tension
Pendant cette procédure :
−NE CONNECTEZ PAS ou ne DECONNECTEZ PAS le TX Racing Wheel
avant d’être invité à le faire.
2) Si ce n’est pas déjà fait, téléchargez et installez le dernier pilote PC -
DRIVERS FORCE FEEDBACK sur votre PC. [Package 2023_TTRS_3]
Vous trouverez le dernier pilote de votre appareil sur notre site, dans la section
Pilotes : https://support.thrustmaster.com/product/txracingwheel/
Redémarrez l’ordinateur pour finaliser la mise à jour.