Thrustmaster VIPER TQS User manual

Europe, Middle East
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ITALIANO
ESPAÑOL
PORTUGUÊS
РУССКИЙ
ČESTINA
TÜRKÇE
POLSKI
SVENSKA
SUOMI
SLOVENCINA
MAGYAR
תירבע
ةيبرعلا
North America/
Norteamérica
ENGLISH
FRANÇAIS
ESPAÑOL
Latin America/
América Latina
ENGLISH
ESPAÑOL
PORTUGUÊS
Asia Pacic
日本語
简体中文
繁體中文
한국어
ENGLISH

For PC (Windows 10/11)
User Manual
Carefully read
the instructions provided in this
manual before installing the product, before
any use
of the product and before
any maintenance. Be sure
to follow the safety instructions. Failure to follow these
instructions may result in accidents and/or damage.
Keep this manual so that you can refer to the
instructions in the future.

TABLE OF CONTENTS
1. BOX CONTENTS....................................................5
2. VIPER TQS FEATURES........................................6
3. MAPPING OF BUTTONS AND AXES.................8
4. INFORMATION ABOUT USING VIPER TQS ...10
5. ADJUSTING THE FRICTION ..............................11
6. INSTALLATION ON A SUPPORT......................12
7. INSTALLING VIPER PANEL* .............................17
8. INSTALLATION ON PC .......................................20
9. CUT OFF AND AFTERBURNER DETENTS .....23
10. T.A.R.G.E.T ADVANCED PROGRAMMING
SOFTWARE ...................................................................26
11. FAQ AND TECHNICAL SUPPORT....................28

3
Rev up your engines and fly into the danger zone
with the iconic throttle quadrant system from the
U.S. Air Force’s VIPER — the world’s most widely-
used modern fighter aircraft!
Take your cockpit to the next level with the unique
ergonomics of a 1:1 scale HOTAS replica featuring
a metal handle, plus realistic buttons and detents.
This manual will help you install and use your
VIPER TQS under the best conditions. Before
taking off, make sure to carefully read all of these
instructions and warnings: they will help you get
the most enjoyment out of your product.

4
Updating the firmware
In order for VIPER TQS to function properly in video
games, you must update its firmware.
To carry out the update, please visit
https://support.thrustmaster.com/product/viper-
tqs/
Select Firmware, then follow the instructions —
including the downloading and installation procedure.

5
1. Box contents

6
2. VIPER TQS features
1. Handle
2. Cut Off stop
3. Afterburner stop
4. CHAFF/FLARE slap switch
5. Clip for mission map

7
6. USB connector (type C)
7. Friction adjustment tool location
8. Throttle friction adjustment access point

8
3. Mapping of buttons and axes
VIPER TQS handle: mapping of the 19 buttons and 5
axes in mode A (without virtual buttons)

9
Mode B: with virtual buttons

10
4. Information about using VIPER
TQS
Pinch hazard
Never place your fingers in the stop areas when you
are using the handle.

11
5. Adjusting the friction
You can adjust the friction of your VIPER TQS throttle
quadrant to your own personal preference by using the
tool included on the side of VIPER TQS. Please note,
however, that optimal throttle friction has been set by
default at the factory.
In order to
avoid damaging the friction system, be sure
not to overtighten the adjustment screw.
Also, be sure not to completely untighten the
adjustment screw: by doing so, you run the risk that
the throttle will no longer be able to stay in position.

12
6. Installation on a support
VIPER TQS can be installed on different types of
supports. Most cockpits and supports available on the
market are already compatible with similar
Thrustmaster products (i.e. HOTAS Warthog).
Please keep in mind that VIPER TQS fe
atures a
powerful lever effect, and must therefore be firmly
attached.
Attach the base to your support using suitable M6
screws (not included), so as not to damage the handle.
A complete VIPER TQS blueprint is available at
https://support.thrustmaster.com/product/viper-
tqs/
Before each use
, make sure that VIPER TQS is still
properly attached to the support, according to the
instructions specified by the manufacturer.
Be sure to take into account the material that your
support is made of, and ensure that it is possible to
safely attach the product to it. VIPER TQS must be
used on a desk made of a solid material (i.e. MDF or
wood), without any hollow or glass components.

13
Mounting blueprint dimensions (in mm)
You can download the mounting blueprint from
https://support.thrustmaster.com/product/viper-
tqs/, then print it out and use it on your support in
order to prepare the drill holes.
*

14
Installation using TM Flying Desk
Mount*
TM Flying Desk Mount is a metal mounting system
featuring a clamping screw, improving the ergonomics
and piloting position when using your device. This
system is designed for use with desks and tables from
0.6–2.0 inches / 15–50 mm thick.
*Sold separately

15
Installation using TM Flying Clamp*
TM Flying Clamp is a height-adjustable support
designed by Thrustmaster for its flight simulation
accessories. This mounting system features two
clamping screws allowing it to be adjusted for use with
desks and tables from 0.6–1.8 inches / 15–45 mm thick.
*Sold separately

16
Please note that the heavy
weight of VIPER TQS may
result in unwanted movements of
the mounting
system.

17
7. Installing VIPER PANEL*
*Sold separately. VIPER PANEL is included with VIPER
TQS Mission Pack.
VIPER PANEL is a control panel that lets you expand
your flight/combat capabilities with a total of 43 buttons
and 1 axis — all of which are programmable via the
T.A.R.G.E.T software. VIPER PANEL is a complement
to VIPER TQS.

18

19
*Not included