
The external battery is designed to simply and conveniently charge most of digital devices
on a plug-and play basis through a DC5V USB input. SPECIFICATIONS
PROWER BANK LM-P5
CHARGING THE POWER BANK
1. Selecl the original USB data cable and connect its micro USB interface with the micro USB input port of the power bank.
2. Connect the USB interface with the USB port of the DC 5V USB charger (or computer). Charging starts when It's connected.
CHARGING THE MOBILE DEVICES BY THE POWER BANK
1. lnspect whether the charging voltage of the mobile device matches the DC 5V output Voltage of the power bank
2. Connecl lhe output of the power bank with lhe input port of mobile device by USS cable.
3. Aftef connection, the power bank will starl charging automatically.
4. Please disconnect the power bank from mobile devices when charging is full
5. Aeconnect it when you need to charge it again.
LED LIGHT FUNCTION
1. To turn on the LED light: Pull open the LED light, and it will turn on automatically.
2. To adjust the light according to your preference till the light to change angles.
3. To turn off the LED light: Push back the lamp holder, and the light will turn off automatically.
4. The light is not connected to the output slalion, so i1 can work without output charging.
SAFETY TIPS
1. The power bank is supplied with a Micro USB charging cable. Please use your own device's cable if it doesn't apply.
2. Please Check the battery Percentage of the power bank before use. If low, you need to charge the power bank first.
3. When power bank gets fully charged, please disconnect it on time.
Tel (Dubai, UAE): +971 4 452 6633
Web: www.cygnustelecom.com /cygnustelecom
/cygnustel
/cygnustelecom