tiki Glowing Table Torch Product manual

1
/
Save these instructions for future reference.
B
CAUTION
• Keepclothing,hairandfaceawayfromflame.
• Donotplacetorchundercoveredshelter
orumbrella,nearpedestriantrafficor
combustiblessuchaswoodstructures,fuel,
clothingordryvegetation.
• DonotuseFuelCanisteroutsideofGlowing
TableTorch.
• Useonlyinawellventilatedarea.
• Donotuseinwindyconditions.
• DonottipGlowingTableTorchasfuelcan
spillandcausefireorseriousinjury.
C
A
GlowingTableTorchActivation:
•Utilize Glowing LED option at night for optimal
illumination effect (see FIG 1).
-Push once for white LED.
-Push twice for multi-colored LED.
-Push three times to turn off.
InstructionsandWarnings
ProductBoxContents:
A. 1 Glowing Table Torch
(requires 2 AA batteries - included)
B. 1 Snuffer Cap
C. 1 Fuel Canister with Flame Guard
Glowing Table Torch
WARNING
• Readandunderstandtheseinstructions
beforeuse!
• Foroutdoortabletopuseonly!
• Keepoutofreachofchildrenandpets.
• Neverleaveaburningtorchunattended.
• Hotwhileinuse.
• Topreventburninjuries,snuffandallowto
coolfor30minutesbeforehandling,refilling
orcleaning.
• FailuretofollowInstructionsandWarningsmay
resultinseriousinjuryorpropertydamage.
• UseonlyTIKI®Brandtorchfuel-Donotuse
gasolineorotherflammablefuel.
• Donotoverfill.
• Neverfillaburningtorch.
• Beforerefilling,carefullyplacetheSnuffer
Capovertheflametoextinguish.
• Torchfuelisharmfulorfatalifswallowed.
Containspetroleumhydrocarbons.
• ReadWarningsontorchfuelcontainercarefully.
GlowingTableTorchFuel-Options
Glowing Table Torch Fuel Canister
• FillwithTIKI®Brand
OFF!®BiteFighter®or
Citronella Torch Fuel.
/
FIG1

2
Refilling:
•Carefully place the metal Snuffer completely over the
Wick until the flame is extinguished – DO NOT BLOW
OUT (see FIG 5). Allow to cool for 30 minutes before handling and
refilling.
•Remove the Fuel Canister from the Glowing Table Torch Globe.
•Unscrew the metal Flame Guard from the Fuel
Canister (see FIG 2).
• FillwithTIKI®Brand Torch Fuel – DO NOT OVERFILL (see FIG 3).
•Reattach the metal Flame Guard to the Fuel Canister – DO NOT
OVERTIGHTEN (see FIG 2).
•Wipe away any spilled fuel before lighting.
Extinguishing:
• Carefully place the metal Snuffer completely over the
Wick until the flame is extinguished – DO NOT BLOW
OUT (see FIG 5).
Note: Leave the Snuffer on the Glowing Table Torch to
prevent water contamination.
Note: If the Fuel becomes contaminated with water, the Wick
and Fuel must be replaced and properly disposed of in
accordance with local laws and regulations.
/
FIG5
FillingandLighting:
•Remove the Fuel Canister from the Glowing Table Torch
Globe.
•Unscrew the metal Flame Guard from the Fuel
Canister (see FIG 2).
• FilltheFuelCanisterwith3oz.ofTIKI®Brand Torch
Fuel - DO NOT OVERFILL (see FIG 3).
•Reattach the metal Flame Guard to the Fuel
Canister - DO NOT OVERTIGHTEN (see FIG 2).
• Wipe away any spilled fuel before lighting.
• Place the Fuel Canister into the Glowing Table Torch Globe.
• Allow the Wick to become saturated with fuel before lighting.
• UseaTIKI®Brand Lighter or long fireplace match to light the
Glowing Table Torch (see FIG 4).
/
FIG4
1/2” (13 mm)
FIG2
Proper
Wick
Position
1/2” (13 mm)
FIG3
Fuel
Fill
Level

02/13 4000010N1
3
©2013LamplightFarmsInc.•W140N4900LillyRd.,MenomoneeFalls,WI53051•www.tikibrand.com•www.lamplight.com
TIKI®& PARADISEINYOURBACKYARD®areregisteredtrademarksofLamplightFarmsInc.
OFF!®isaregisteredtrademarkofS.C.Johnson&Son,Inc.usedunderlicense.
DesignedandEngineeredinMenomoneeFalls,Wisconsin•AssembledinChina•CustomerService:1-888-473-1088
Storage:
•Store Fuel in original Fuel Bottle with Cap secured, and dispose of any
unwanted Fuel in accordance to local laws and regulations.
•Store in upright position (see FIG 9).
•For best results, store product away from the weather
conditions when not in use.
•Remove batteries for long term storage.
1/2” (13 mm)
FIG8
WickReplacement:
•Carefully remove the Wick from the Flame
Guard (see FIG 7). Properly dispose of the Wick in
accordance with local laws and regulations.
•Replace the Wick with a new TIKI®Torch Wick and position
the Wick with 1/2"exposed (see FIG 8).
•Trim as required.
Proper
Wick
Position
FIG7
BatteryReplacement:
• Remove the cover retaining screws and open the battery
compartment cover (see FIG 6).
• Remove the old batteries carefully.
• Replace Batteries with (2) AA Batteries.
• Replace the battery compartment cover and retaining
screws.
A
A
A
A
_
+
_
+
FIG6
/
FIG9
CAUTION
• Donotmixstandard,alkaline,
andrechargeablebatteries.
• Donotmixoldandnewbatteries.
• Removebatteriesforstorage.
• Disposeofbatteriesproperly.
Cleaning:
•Use damp cloth to remove debris from glass as needed.