TIME LED 781296 User manual

Installation and Operating Instructions
INS-781296-V1
Read and follow instructions before operating your CCT LED Controller with Remote.
Save this manual for future reference.
Package includes:
1 x Ambient CCT LED Lighting Controller
1 x Remote
1 x CR2032 Battery For Remote
1 x Manual
TIME LED is part of Pitacs Limited. For customer support contact:
Bradbourne Point, Bradbourne Drive, Tilbrook, Milton Keynes, Buckinghamshire MK7 8AT
T: [phone] F: [phone] E: [e-mail] W: www.timeled.co.uk
015
015
Ambient CCT LED Lighting Controller With Remote
Safety:
• Installation of this LED controller should only be carried out by a qualified electrician or competent person to the
latest Building and current IEE Wiring Regulations (BS7671).
• Please isolate mains prior to installation/maintenance.
• Check the total load on the circuit (including when this product is fitted) does not exceed the rating of the circuit
cable, fuse or circuit breaker.
• Please note the IP (Ingress of Protection) rating of this product when deciding the location for installation.
• This product is IP20 rated, for internal use only.

Full Technical specification available upon request. Contact [e-mail] for PDF.
Ambient CCT LED Lighting Controller
With Remote
Cleaning:
• Do not use any chemical or abrasive cleaners.
• Clean product with a soft, dry cloth.
Warranty:
• This product is warranted to be free of defects in materials, design and workmanship for 1 year from the date of
purchase (conditions apply, please see TIME LED website for further details). If a suspected fault should develop in this
time, please contact us via the address on the front.
Recycling Advice:
Waste Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Product Code 781296
Driver Size (mm)
Remote Size (mm)
49x21x36
84x51x7
Cable Length 13cm
Voltage 12-24V
Working Temperature -20 to +60°C
Maximum Wattage 72W (12V)
144W (24V)
Max Load 2A for each colour
Lifespan 7500 Hours
Material PC
IP Rating IP20
Warranty 1 Year
Operation Instructions
Color temperaturecontroller
Pattern Table
Brightness+ Brightness-
Color temperature hot key
Brightness- Brightness+Brightness-
On
FLASH
FADE
Speed+
Speed-
Off
Brightness+
Technical
Input voltage:DC12-24V
working temperature:-20-+6 0℃
Remote distance:8 M
RC.size:84x51X7mm
IR.si ze: 60x35x21mm
Max load
current 2A
each colour
Parameter
(Cold White)
(Cold White)
(Warm White)
(Warm White )
CW
DC12-24V
Signal
Output
IR Senser
WW
Remote Interface:
Installation:
FLASH
ONOFF
FADE
QUICK
SLOW
CT CONTROLLER
Mode Settings
Power On
Power O
Brightness
Adjustments
Colour Choices
Cool White
Brightness Adjustments
Warm White
Brightness Adjustments
DC 12V OR DC 24V