TMB ProPlex Digital RGB Drive User manual
1
ProPlex Digital RGB Drive
PortableMount
TMB 24/7 Technical Support
US/Canada: +1 818.794.1286
Toll Free: 1 877.862.3833 (877.TMB.DUDE)
UK: +44 (0)20.8574.9739
Toll Free: 0800.652.5418
e-mail: techsupport@tmb.com
2
TABLE OF CONTENTS
INTRODUCTION ..................................................................................................................3
PRODUCT OVERVIEW ....................................................................................................................................... 3
UNPACKING INSTRUCTIONS .............................................................................................................................. 3
POWER REQUIREMENTS .................................................................................................................................. 3
SAFETY INSTRUCTIONS .................................................................................................................................... 4
FUSE REPLACEMENT ....................................................................................................................................... 4
PANEL FRONT/REAR 24V ................................................................................................................................. 5
LINKING .......................................................................................................................................................... 6
LED STRIP PIN OUT ........................................................................................................................................ 6
OPERATION .......................................................................................................................7
NAVIGATING THE CONTROL PANEL .................................................................................................................... 7
MAIN MENU FUNCTIONS .................................................................................................................................. 8
MENU TREE .................................................................................................................................................... 8
DMX ADDRESS ............................................................................................................................................... 9
CONTROL ...................................................................................................................................................... 10
DEMO ........................................................................................................................................................... 12
CONFIG ......................................................................................................................................................... 13
DMX HOLD ................................................................................................................................................... 14
BACKLIGHT ................................................................................................................................................... 14
INSTALLATION..................................................................................................................15
MOUNTING / RIGGING ................................................................................................................................... 15
RACKMOUNT KIT ........................................................................................................................................... 15
APPENDIX .......................................................................................................................17
RDM FUNCTIONALITY .................................................................................................................................... 17
LIMITED WARRANTY ....................................................................................................................................... 17
RETURN PROCEDURE .................................................................................................................................... 18
TECHNICAL SPECIFICATIONS .......................................................................................................................... 19
3
1. INTRODUCTION
PRODUCT OVERVIEW
The ProPlex Digital RGB Drive is a 24V DMX controller for Floppy Flex Digital LED neon.
Features include:
• Rugged, tour-ready ProPlex “Blue Box” PortableMount chassis. Packaged for extreme
Conditions. Shock-mounted circuitry. Advanced thermal management
• Many onboard preprogrammed “looks” with RGB presets
• Perfect for Firefly FloppyFlex Digital RGB LED neon. Connect 1 x 15-meter run.
• Color LCD Display with easy function control buttons for easy setup and configuration
• Heavy-duty yoke for truss mounting. Optional RackMount Kit available.
• One 24VDC, Floppy Flex Digital RGB output
• RDM functionality for complete system monitoring and addressing via RDM
• Self-healing overcurrent / short circuit protection
• Neutrik connectors throughout
UNPACKING INSTRUCTIONS
Upon receipt of the unit, carefully unpack the carton and check the contents to ensure that all parts are in
good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear
to be damaged from shipping or if the carton itself shows signs of mishandling. Save the carton and all
packing materials. In the event that a unit must be returned to the factory, it is important that it unit be
returned in the original factory box and packing.
POWER REQUIREMENTS
Before powering the unit, make sure the line voltage is within the range of accepted voltages. This unit
accommodates 100-240 VAC, 50/60 Hz. All units must be powered directly from a switched circuit and
cannot be operated with a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0-100% switch.
4
SAFETY INSTRUCTIONS
• Keep this user manual for future reference. If unit is sold to another user, make sure they also receive
this instruction booklet.
• Ensure the unit is connected to proper voltage, and that line voltage is not higher than that stated on the
device.
• Make sure there are no flammable materials close to the unit while operating.
• Always disconnect from the power source before servicing or fuse replacement. Always use the fuse
specified in this manual.
• Always use a safety cable when hanging unit overhead.
• Maximum ambient temperature (Ta) is 40 °C (104 °F). Do not operate unit at temperatures above this
rating.
• In the event of a serious operating problem, stop using the unit immediately. Repairs must be carried out
by trained, authroized personnel. Conact the nearest authorized technical assistance center. Only
OEM spare parts should be used.
• Do not connect the device to a dimmer pack.
• Make sure power cord is never crimped or damaged.
• Never disconnect power cord by pulling or tugging on the cord.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service, please
contact your distributor.
FUSE REPLACEMENT
The Digital RGB Drive uses a 6.0A, 250V barrel fuse, 5x20mm (0.2x0.8 in.).
To replace fuse:
1. With a screwdriver turn the fuse cap counter-clockwise to remove fuse cap with fuse.
2. Replace fuse attached to fuse cap.
3. Reinsert fuse cap with new fuse and tighten clockwise
Please read these instructions carefully. This user manual
contains important information about the installation, usage
and maintenance of this product.
Disconnect the power cord before replacing a
fuse and always replace with the appropriate
fuse.
5
PANEL FRONT:DIGITAL RGB DRIVE 24V
PANEL REAR:DIGITAL RGB DRIVE 24V
FEATURES
1 LED strip output for use with Digital FloppyFlex
24V DC output
Maximum 180w total power
Power input- 90-240VAC, 50/60Hz
6
LINKING
1) Connect the male 5-pin XLR connector of the DMX cable to the output (female) 5-pin XLR
connector of the DMX console.
2) From the DMX console, connect the female 5-pin XLR connector of the DMX cable to the
input connector (male) of the ProPlex RGB Drive.
3) Connect from the fixture output as stated above to the input of the following RGB Drive and
so on.
4) Continue the link until last Digital RGB Drive is connected in your DMX signal data chain.
5) Attach LED strips to each ProPlex RGB Drive as planned.
LED STRIP PIN OUT
RGB LED strip connection pin out.
Note: NC Connector does not get connected
7
2. OPERATION
NAVIGATING THE CONTROL PANEL
Access control panel functions using the four control panel buttons surrounding the LCD display.
Press and hold the <MENU> button to scroll through the top level menu items. This is the top of the
menu map. Use the <UP> and <DOWN> buttons, located right from LCD screen, to navigate the
menu map and menu options.
Press the <SELECT> button to access the menu function currently displayed or to enable a menu
option. To return to the top of the menu map or menu without changing the value, press the <EXIT>
button.
8
Main Menu Functions:
DMX Address – DMX address selection
Preset – Standalone mode with intensity of each color
Demo – Pre-programmed test modes
Config – Change fixture parameters
During normal operation of the ProPlex Digital RGB Drive, the LCD of the control panel displays
the current DMX address. If the unit is not receiving a DMX signal, the address blinks in RED
color.
MENU TREE
Level 1
Level 2
Level 3
Function
DMX
Address
Set the DMX start address
Preset
This mode is made for stand-alone DMX
RED
000 ↔
255
Set the DMX value from 0-100% for RED color
GREEN
000 ↔
255
Set the DMX value from 0-100% for GREEN color
BLUE
000 ↔
255
Set the DMX value from 0-100% for BLUE color
DEMO
Pre-programmed fixture tests.
Demo 1
Red color test
Demo 2
Green color test
Demo 3
Blue color test
Demo 4
White color test
Demo 5
Yellow color test
Demo 6
Cyan color test
Demo 7
Magenta color test
Demo 8
RGBW Full test
Demo 9
Rainbow Long test
Demo 10
Rainbow short test
Demo 11
Rainbow + Run Soft test
Demo 12
Rainbow + Run Hard test
Demo 13
White + Run hard test
Demo 14
Strobe Red test
Demo 15
Strobe Green test
Demo 16
Strobe Blue test
Demo 17
Strobe White test
Config
Configuration menu
DMX
hold
Select what will happen after fixture loses its DMX signal
ON
Holds the last received DMX values when DMX signal is lost
OFF
Does not hold the last received DMX values when DMX signal is lost and stops light
output
Backlight
Screen backlight setting
Always
ON
Backlight is always ON
OFF in
10s
Backlight will turn OFF in 10s of idle
9
DMX ADDRESS – To set the required DMX address, you must:
1) Press and hold <MENU> button to open the Main Menu.
2) Use <UP> and <DOWN> buttons to find the ”DMX Address” submenu.
3) Press <Select> button to access the DMX address value change submenu.
4) Use <UP> and <DOWN> buttons to set necessary DMX address value (for
example: „DMX Addr: 1”).
5) Use <SELECT> button to confirm the new DMX address.
6) When the new DMX address is confirmed, Main Menu appears. Press <EXIT>
button to return the working state.
7) Working state control panel display shows current DMX address, in this case it is 1.
Also the current power usage can be seen there (in this case it is 5W).
10
CONTROL – The Digital RGB Drive LED strip controller has one default 3-channel controlling
mode which can’t be changed.
Channel
Value
Function
Pixel numb.
1
000 ↔ 255
RED intensity 0% - 100%
1
2
000 ↔ 255
GREEN intensity 0% - 100%
1
3
000 ↔ 255
BLUE intensity 0% - 100%
1
4
000 ↔ 255
RED intensity 0% - 100%
2
5
000 ↔ 255
GREEN intensity 0% - 100%
2
6
000 ↔ 255 BLUE intensity 0% - 100%
2
...
...
...
...
...
...
...
...
...
...
...
...
358
000 ↔ 255
RED intensity 0% - 100%
120
359
000 ↔ 255
GREEN intensity 0% - 100%
120
360
000 ↔ 255 BLUE intensity 0% - 100%
120
Each meter of Digital FloppyFlex consists of 8 pixels. Each meter of Digital FloppyFlex takes 24 DMX
channels (8 pixels x 3 RGB channels).
PRESET – This is a manual stand-alone mode where you can set your LED strips as a static RGB
wash. Even if the fixture is turned off and on, the preset mode values will be saved.
To work with preset mode, you have to set 3 settings:
• RED (000 ↔ 255 – intensity of RED color
• GREEN (000 ↔ 255) – intensity of GREEN color
• BLUE (000 ↔ 255) – intensity of BLUE color
1) Press and hold <MENU> button to open the Main Menu.
2) Use <UP> and <DOWN> buttons to find the Preset submenu and press <Select> button.
3) Manual mode submenu will open.
• RED – color intensity (000 ↔ 255)
• GREEN – color intensity (000 ↔ 255)
• BLUE – color intensity (000 ↔ 255)
11
4) To change values of preset mode, you use the <+> and < - > buttons. After selecting the desired
value of the first color (RED), press the <SELECT> button to edit the next value in the list (BLUE).
When all values have been set as desired, select "Save". It will flash “Saved”.
5) Now the device should have a LED output.
6) Press <EXIT> button. All settings will be saved.
12
DEMO– in this menu, select the following demo scenes:
Demo 1- Red color test
Demo 2- Green color test
Demo 3- Blue color test
Demo 4- White color test
Demo 5- Yellow color test
Demo 6- Cyan color test
Demo 7- Magenta color test
Demo 8- RGBW Full test
Demo 9- Rainbow Long test
Demo 10- Rainbow short test
Demo 11- Rainbow + Run Soft test
Demo 12- Rainbow + Run Hard test
Demo 13- White + Run hard test
Demo 14- Strobe Red test
Demo 15- Strobe Green test
Demo 16- Strobe Blue test
Demo 17- Strobe White test
1) Press and hold <MENU> button to open the Main Menu.
2) Use <UP> and <DOWN> buttons to find the Demo submenu and press select button.
3) Choose the desired demo using <UP> and <DOWN> buttons.
4) After the demo has completed playback, press <SELECT> or <EXIT> button to return to the main
menu.
13
CONFIG– Under this menu, change the devices configuration settings.
1) Press and hold <MENU> button to open the Main Menu.
2) Use <UP> and <DOWN> buttons to find the Demo submenu and press select button.
3) Another submenu will open:
4) Using <UP> and <DOWN> buttons choose the setting to be modified and press the <SELECT>
k ey.
14
DMX HOLD - Set the RGB Drive’s reaction to lost DMX signal.
HOLD – Holds the last received DMX values when DMX signal is lost
OFF – Doesn’t hold the last received DMX values when DMX signal is lost; stops light output.
Use <UP> and <DOWN> keys to find the desired option and press <SELECT> button. After selecting
correct setting, press <EXIT> key to exit this submenu.
BACKLIGHT - Display backlight settings
Use <UP> and <DOWN> keys to find the desired option and press <SELECT> button. After selecting
correct setting, press <EXIT> key to exit this submenu.
BACKLIGHT - Display backlight settings
Always ON – Backlight is always turned on
OFF in 10s – Backlight is turned off after 10 seconds of idle.
Use <UP> and <DOWN> keys to find the desired option and press <SELECT> button. After selecting
correct setting, press <EXIT> key to exit this submenu.
15
3. INSTALLATION
MOUNTING /RIGGING
Orientation – ProPlex Mini units may be mounted in any position, using the standard yoke.
Always make sure there is adequate room for ventilation.
Rigging – Always consult a certified rigging specialist before suspending any device
overhead.
Use ProBurger® couplers or equivalent C- or O-type clamps for attaching to truss. After
establishing the desired position, tighten all appropriate bolts.
• Always use safety cables!
• When selecting installation location, consider routine maintenance.
• Never mount Mini enclosure where it will be exposed to moisture, high humidity,
extreme temperatures, or restricted ventilation.
RACKMOUNT KIT
ProPlex RackMount Kits are designed to allow easy rack mounting of ProPlex PortableMount units.
1) ProPlex PortableMount enclosures include a yoke for truss mounting. Before attaching RackMount
Kit, remove the yoke by unscrewing the four Phillips-head (crosshead) screws which attach the yoke
to the chassis.
2) The 2U RackMount Kit Single is comprised of two rack ears, one long and one short. To fasten the
ears to the ProPlex PortableMount chassis, remove the two chassis screws that align with the rack
ear mounting holes at the front of the chassis. Then use the same screws to securely fasten the
ears to the chassis, per below illustrations. The short and long ears can be mounted to either side of
the chassis.
Removable yoke
Front of unit
Rack ear screws
Yoke fastener screws
16
3) Caution: Mounting ProPlex RGB Drive. RGB Drive units require adequate airflow. When
installing multiple units, they must be mounted on alternating sides of the rack, so one does NOT
reside directly above another, with at least one-half 1U space between each assembly, per below
illustration.
Warning: Placing two PortableMount RGB Drives directly next to each other – vertically or
horizontally – in a rack or enclosed space will prevent adequate air circulation and may result in
overheating of the device. Misapplication will void the warranty of the ProPlex device.
Allow min. ½ U rack
space between
assemblies
17
4. Appendix
RDM FUNCTIONALITY
ProPlex Digital RGB Drive PortableMount devices have RDM Functionality. Below are the RDM functions
available in these devices. TMB has many options for RDM control of your devices: ProPlex RDMigo and
IQ RDM Manager Software; ProPlex Striker; and ProPlex MasterFade. Additionally, ProPlex RDM Opto-
Splitters and the ProPlex IQ product range offer many means of RDM over DMX data distribution.
Main
Display
Temperature
Mode
Display invert
Lowest value
DMX address
Display level
RDM version
Software version
LIMITED WARRANTY
ProPlex Data Distribution Devices are warranted by TMB against defective materials or workmanship for a
period of two (2) years from the date of original sale by TMB.
TMB’s warranty shall be restricted to the repair or replacement of any part that proves to be defective and for
which a claim is submitted to TMB before the expiration of the applicable warranty periods.
This Limited Warranty is void if the defects of the Product are the result of:
• Opening the casing, repair, or adjustment by anyone other than TMB or persons specifically authorized
by TMB.
• Accident, physical abuse, mishandling, or misapplication of the product.
• Damage due to lightning, earthquake, flood, terrorism, war, or act of God.
TMB will not assume responsibility for any labor expended, or materials used, to replace and/or repair the
Product without TMB’s prior written authorization. Any repair of the Product in the field, and any associated
labor charges, must be authorized in advance by TMB. Freight costs on warranty repairs are split 50/50:
Customer pays to ship defective product to TMB; TMB pays to ship repaired product, ground freight, back to
Customer.
This warranty does not cover consequential damages or costs of any kind.
A Return Merchandise Authorization (RMA) Number must be obtained from TMB prior to return of any
defective merchandise for warranty or non-warranty repair. For all repairs please contact TMB Tech Support
Repair using the contact information below or email TechSupportRepairNA@tmb.com.
US UK
527 Park Ave. 21 Armstrong Way
San Fernando, CA 91340 Southall, UB2 4SD England
Tel: +1 818.899.8818 Tel: +44 (0)20.8574.9700
Fax: +1 818.899.8813 Fax: +44 (0)20.8574.9701
tmb-inf[email protected] tmb-inf[email protected]
www.tmb.com www.tmb.com
18
RETURN PROCEDURE
Please send returned merchandise prepaid and in the original packing. Freight call tags will not be issued
for shipping the product to TMB, but TMB will pay the freight for return to the customer. Clearly label
package with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA #
will delay service. Please contact TMB and request an RMA # prior to shipping the unit. Be prepared to
provide the model number, serial number, and a brief description of the cause for the return. Be sure to
properly pack the unit; any shipping damage resulting from inadequate packaging is the customer’s
responsibility. TMB reserves the right to use its own discretion to repair or replace product(s). Proper UPS
packing or double-boxing will better ensure product integrity when shipped.
Note: If you are given an RMA #, please include the following information on a piece of paper inside
the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
19
TECHNICAL SPECIFICATIONS –DIGITAL RGB DRIVE 24V
WEIGHT &DIMENSIONS (W/YOKE)
WIDTH .............................................................................................................. 8 IN / 202 MM
DEPTH ......................................................................................................... 10.7 IN / 272 MM
HEIGHT .......................................................................................................... 7.3 IN / 186 MM
WEIGHT ...................................................................................................... 8.75 LB / 3.98 KG
POWER
AC POWER ......................................................................................... 90-240VAC, 50-60Hz
DC POWER ............................................................................... 24VCD, max. 6A per output
POWER CONSUMPTION ....................................................................................... Up to 400W
CONTROL
AC POWER ......................................................................................... 90-240VAC, 50-60Hz
DC POWER ............................................................................... 24VCD, max. 6A per output
THERMAL
OPERATING TEMPERATURE ............................................................................... -20 TO +40 °C
COOLING .................................................................................................... Passive / Active
CONTROL /PROGRAMMING
DMX IN / OUT ....................................................................................................... XLR 5-PIN
DMX CHANNELS ........................................................................................................... 3-12
WARRANTY INFORMATION
WARRANTY ................................................................................... 2-YEAR LIMITED WARRANTY
20
Table of contents
