Timeguard ECO1FL User manual

ECO CFL Flood Light
Uncontrolled
Model: ECO1FL
Model: ECO2FL
Model: ECO3FL
Installation & Operating Instructions

1
20W 4 x 32mm
Ø6mm
35mm
60mm
6 x 30mm
2x
2x

2
Slaving
For ECO CFL
Flood Light Uncontrolled Unit only For ECO 1FL & ECO2FL only
23W Max

3
For ECO1FL & ECO2FL only
For ECO3FL only23W Max
Pan 30º
1
2
Tilt 60º
1. General Information
Unit is for outdoor use only. Unit must be mounted as a fixed luminaire, and is not
suitable for portable use.
2. Parts Included
• Low Energy Floodlight.
• Instruction manual. Please keep safe for future reference.
• Accessory Pack including lens mask , screws and wall plugs.
• 1pc. 20W low energy Compact Fluorescent Light. (For ECO1FL & ECO3FL)
• 2pcs 20W low energy Compact Fluorescent Light. (For ECO2FL)
3. Tools & Parts Needed
• 3  exible core cable (1.0mm² or 1.5mm²).
• Electric/hand-held drill & bits.
• Terminal or Electricians screwdriver.
• Wire cutters.
Do not attempt to install during wet weather, if you are suffering from nausea or
dizzy spells or on medication with similar side effects.
No User Serviceable Parts Inside

4
4. Installation
After choosing a suitable location install the unit as follows:
The unit is suitable for connection to a 230 V ac 50Hz electricity supply. It is
suggested that 3-core round exible cable of 1mm² or 1.5mm² gauge is used.
An internal switch should be installed to switch the power to the unit ON & OFF.
This unit uses an integral wall xing plate, detach the wall xing plate by
unscrewing and release but do not remove the xing screw on the underside of
the wall plate (Diagram 3).
Mark the position of the wall xing holes ( 60mm ). Ensure the wall plate is
correctly positioned. Note the “UP” ident on the inside of the wall plate . Drill the
holes, insert the wall plate into the holes.
Pierce and pass the cable through the grommet before securing the
wall plate to the wall.
It is recommended that the grommet is pierced with a screwdriver to ensure a
better seal. (Diagram 4).
Fix the wall plate to the wall with screws provided . Connect the cable to the
terminal block on the unit as follows ( Diagram 5 ):
Neutral (Blue ) N
EARTH (Green/ Yellow)
LIVE (Brown) L
Ensure Connections are secure.
Ensure any extra cable and the tether is tucked into the space in the wiring box.
The unit is supplied with a hanging attachment (tether) to aid installation. Ensure
the tether is securely xed into the slot before releasing the weight of the unit.
(Diagram 6)
IMPORTANT
Switch off the electricity at the fuse box by removing the relevant
fuse or switching off the circuit breaker before proceeding with
the installation (Diagram 2).

5
Designed in the U.K. 67-058-422
Timeguard Limited.
Victory Park, 400 Edgware Road,
London NW2 6ND
Sales Office: 020 8452 1112
or email [e-mail]
or email [e-mail]
To connect another unit of oodlight , connect the looping power cable to the
terminal block on the master unit as follows ( Diagram 7 ):
Neutral (Blue ) N
EARTH (Green/ Yellow)
LIVE (Brown) L’
Fit the oodlight to the bracket by inserting the catch in the oodlight into the
recess at the top of the wall plate and locating the oodlight securely over the
wall plate. Fit and fully secure the retaining screw (Diagram 3).
For ECO1FL & ECO2FL
To t CFL, release but do not remove the screw on the front cover of the
oodlight , open and rotate down but do not separate from the main oodlight
body. (Diagram 8)
For ECO3FL
To t the bulb, turn the lamp enclosure 180 anti-clockwise to release from the
bayonet lock.(Diagram 10)
Remove the bulbs from its packaging and t into the lampholders. Ensure the
bulb is fully secured into the lampholder.
Close the front cover, ensure the screw is fully tighten .
This oodlight uses a universal joint, it can be directed to suit your installation
by rotating the oodlight left to right and up or down. (Diagram 9)

6
3 Year Guarantee
In the unlikely event of this product becoming faulty due
to defective material or manufacture within 3 years of the
date of purchase, please return it to your supplier in the
first year with proof of purchase and it will be replaced free
of charge. For years 2 and 3 or any difficulty in the first year telephone the
helpline on 020 8450 0515.
Note: the lamp is not covered by the warranty.
first year with proof of purchase and it will be replaced free
6. Troubleshooting Guide
Problem
Lamp stays OFF
Solution
• Check that the power is switch ON at the
wall switch.
• Ensure no connections are loose
• Ensure that CFL is seated correctly in the
lamp holder.
• Check the CFL. If the CFL has failed, replace it.
5. Technical Specifi cations
Power Supply
Lamp Type
Environmental Protection
E27 Base
230V AC ~ 50Hz
230 AC 20W Compact Fluorescent lamp supplied
IP44 (suitable for outdoor use)
23W compact  uorescent maximum
Do not use incandescent or halogen bulbs
If you experience problems refer to Troubleshooting Guide.
If problems still exist, do not immediately return the unit to store.
Telephone the Timeguard Customer Helpline
020 8450 0515
Quali ed Customer Support Co-ordinators will be on-line
to assist in resolving your query.

Designed in the U.K. 67-058-422
Timeguard Limited.
Victory Park, 400 Edgware Road,
London NW2 6ND
Sales Offi ce: 020 8452 1112
or email [e-mail]
For a product brochure please contact:
Zerofour – August 2011
or email [e-mail]
HELPLINE
020 8450 0515