TMG TMG-MCP40 User manual

TOLL FREE: 1-877-761-2819www.tmgindustrial.com
• Please read and understand the product manual completely before assembly
• Check against the parts list to make sure all parts are received
• Wear proper safety goggles or other protective gears while in assembly
• Do not return the product to dealer. They are not equipped to handle your requests.
Missing parts or have questions on assembly?
Please call: 1-877-761-2819 or email: [email protected]
PRODUCT MANUAL
v.2023.3.24
TMG-MCP40
COMPOSTER
220 GALLON STATIONARY
1000mm
1000mm

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during construction.
These are packaged within the carton. Note that extra fasteners have been supplied for
your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
It requires two people a full
day to complete installation
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
2/17

PART
NO. Qty.
CP005
C3 4
G2
G3 2
560X230-200N
2
751mm
S5
S7
F1
F3
4
2
105
12
P2 1
P4 14
949mm
PART
NO. Qty.
1
S8 2
F8 2
176mm
C1 2
290mm
C2 2
293mm
ST4 8
P3 3
949mm
949mm
P1 1
900mm
1 4
2 1
740mm
985mm
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
3/17

P2
P3
P4
P4
P4
P4
P3
P4
P4
P4
P4
P4
P4
P4
P4
P4
P3
P4
P1
C3
C3
C3
C3
S5
S5
S5
S5
S8
S8
C2 C1
C2
C1
G2
G3
G3
G2
S7
S7
2
1
1
11
CP005
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
4/17

P2 x1P4 x4
P2
P4
F1x 4
P4
P4
P4
P2
F1
P4
P2 P4 P4 P4
P4
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
5/17