TNT R01-SPL-HSL-102B User manual

4-1
HDMI INPUT DC POWER JACK
AUDIO SWITCH
VIEW A
VIEW A
LABEL-1
SIZE: 50 x 35mm
R01-SPL-HSL-102B
R01-SPL-HSL-102B_2S4P_021312
INPUT
AUDIO
SWITCH
Specification:
1. Splits and transmits HDMI signals to two (2) separate HDMI
displays
2. For active receiver: Extends the transmission distance up to
150 feet @ Blu-ray 1080/60p using one 24 AWG Solid Wire
UTP Cat5/6 cable
3. For passive receiver: Extends the transmission distance up to
50 feet @ Blu-ray 1080/60p using one 24 AWG Solid Wire
UTP Cat5/6 cable
4. Supports resolutions up to Blu-ray 1080/60p, Audio DTS-HD,
Dolby True-HD signals
5. AC/DC Power adapter included
6. Detachable surface mount brackets included
7. Dimensions:91.75(L) x 64.14(W) x 25.6(H) mm
8. 3D-Ready and HDCP compliant
Note:
Green LED indicates power on, Orange LED indicates signal on when connected.
RJ45 JACK
(OUTPUT 2)
RJ45 JACK
(OUTPUT 1)
OUTPUT 1 OUTPUT 2
HDMI UTP Extended
1x2 Active Splitter Transmitter
08/17/11
02/13/12
Revise silkscreen
YYWWXXXXX
2
2
08/18/11 Revise SPEC & white box label
02/13/12 Revise SPEC label
®

(Transmitter)
1 x 2 SPLITTER TRANSMITTER
R01-SPL-HSL-102B
R01-SPL-HSL-102B
HDMI UTP Extended
1x2 Active Splitter Transmitter
4-2
50 x 35
LABEL-1
YYWWXXXXX
YY/WW Serial Number
02/13/12
YYWWXXXXX
2
2
®

HDMI UTP Active 1x2 Splitter Transmitter
Splits and transmits HDMI signal up to two (2) separate HDMI displays
Part number: R01-SPL-HSL-102B
• Splits and tranmits HDMI signal up to 150 feet using one 24 AWG
Solid Wire Cat5/6 cable
• Resolutions up to Blu-ray 1080/60p, Audio DTS-HD, Dolby True-HD
• 3D-Ready, HDCP compliant
Package Contents:
• HDMI UTP Active Splitter 1x2 Transmitter
• (1) Power adapter 5V 2A
• (2) Surface Mount Bracket
• (4) Screws
• (1) User manual
4-3
R01-SPL-HSL-102B
HDMI UTP Extended
1x2 Active Splitter Transmitter
From: YYWWXXXXX
YYWWXXXXX
To:
Serial Number
02/13/12
®

4-4
R01-SPL-HSL-102B
HDMI UTP Extended
1x2 Active Splitter Transmitter
02/13/12
Description:
1) Please fold the cardboard first, and then put 1 main product, 2pcs mount bracket
and zipper package into cardboard-1.
2) Put cardboard-1, DC adapter power, cardboard-2, user manual into the white box.
3) According to the figure, stick the label-1 in front side of the white box.
4) Put white box (20pcs) into the outer carton.
5) White Box size:(L)184X(W)164X(H)55 mm
6)Carton size:(L)588X(W)347X(H)222 mm
7)N.W:9.20 KGS / G.W:9.92 KGS