StarTech.com HDMI-SPLITTER-4K60UP User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: August 2, 2022 8:40 AM
Product ID
HDMI-SPLITTER-4K60UP
Top View
Front View Rear View
Component Function
1HDMI Input Dongle Cable • Connect to an HDMI Source Device
2Reset Button • Resets the HDMI Splitter, forcing re-detection of
the HDMI Displays
3HDMI Output 2 • Connect to an HDMI Display
4Display Activity LEDs • Solid Blue: Connection to an HDMI Display
detected
5HDMI Output 1 • Connect to an HDMI Display
6USB Micro-B Power Port • Connect to the included USB Wall Charger for
power
7Power LED • Solid Blue: Indicates if power is being received
2-Port Portable HDMI® Video Splitter with USB Power - 4K 60Hz
Product Information
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/HDMI-SPLITTER-4K60UP
Package Contents
• 2-Port HDMI Splitter x 1
• USB Micro-B Cable x 1
• USB Wall Charger x 1
• Quick-Start Guide x 1
Requirements
• HDMI Source x 1
• HDMI Display x 2
• HDMI Cables (sold separately) x 2
Installation
Note: Ensure your HDMI Source Device, and the HDMI Displays are powered o before
you begin installation.
1. Connect the HDMI Input Dongle Cable on the HDMI Splitter to the HDMI Output
Port of your HDMI Source Device.
2. Connect the HDMI cables (not included) from each of the HDMI Output Ports on
the HDMI Splitter, to the HDMI Input Port on your HDMI Displays.
Note: Each port is numbered, please take note of which number is assigned to each
HDMI-enabled display device.
3. Power on each HDMI Display, followed by your HDMI Source Device.
4. Plug in the included USB Wall Charger to an available Wall Outlet.
5. Connect the included USB Micro-B Cable from the USB Wall Charger, to the USB
Micro-B Power Port, located on the rear of the HDMI Splitter.
6. Your HDMI Source Device will now display an identical image on each attached
HDMI-enabled display device.
1
3 5 67
4
2

Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands