Toa MW-41BT User manual
MW-41BT
BLUETOOTH WALL CONTROL PANEL
User ’s Manual
User ’s Manual User ’s Manual
FEATURES
MW-41BT Bluetooth Wall Control Panel
DESCRIPTION
Parameters Value
TECHNICAL SPECIFICATION
• With Bluetooth, USB, AUX and MIC in.
MIC input has the highest priority.
Supports 48V phantom power supply.
With 1 balances line output.
MW-41BT in-wall control panel complies with American standards. It
is equipped with Bluetooth, USB, auxiliary input and microphone
input. The in-wall design and elegant appearance make it more
integrated with the environment and save space.
•
•
•
32G
MP3, WMA, WAV, APE, FLCC, ACC +
V4.2 + BR + EDR + BLE
＞ 500mV
＞ 50mV
＞ 2V
90dB
≤10M
＜ 3W
20Hz-20KHz
Input: AC110-240V, Output: DC24V / 1A
116x114x35mm
0.2kg
USB Max. supported capacity
Audio formats
Bluetooth version
AUX input sensitivity
MIC input sensitivity
Output level
SNR
Bluetooth receiving distance
Power consumption
Frequency response
Power adapter
Dimensions(L*W*H))
Net weight
Bluetooth name: MW-41BT
Pairing password: 41BT
Button And Interface Function Operation Instructions
1 2 34
7
8
9 10 11 12 13
6
5
1. USB 2.0 interface
2. Play/Pause
3. Previous song
4. Next song
5. Input status indication
6. Infrared receiving port
7. Input channel selection button (press the
button to select the input channel in turn,
and the selected input channel indicator is
on). The system has a power-off memory
function. When there is no microphone input,
it will automatically recover to the input
channel before power-off after power on.
8. Volume increase button (The volume will
increase by one level when short-pressed,
and it will increase rapidly when long-
pressed. When the maximum volume is
reached, the system will prompt with a beep
sound). The system volume has a power-off
memory function, and the previous volume
will be restored automatically after power-on.
9. MIC input socket (Note: This interface has
a built-in 48V phantom power supply, please
do not connect dynamic microphones!) The
microphone has the highest priority. When
the microphone is turned on and the system
detects a microphone signal, the sound of
the source being used will be reduced by
20dB. When the microphone is turned off, its
volume is automatically restored.
10. AUX input(Mono mode)
11. Power Indicator
12. Device on / off button (if the device is not
used for a long time, please turn off the
power supply of the adapter)
13. Volume down button (volume decreases
by one level when short press, volume
decreases quickly when long press, when the
volume is reduced to the minimum, the
system will prompt with a beep sound) The
system volume has a power-off memory
function, and it will automatically restore to
the previous volume after power-on.
User ’s Manual User ’s Manual
Front of Panel
INSTALLATION
14 1516 17
1819
14. DC24V DC power input terminal (PCB identification characters DC +
connected to positive, DC- connected to negative)
15. Audio output terminal (PCB identification character HOT is in-phase
output signal, COLD is inverting output signal, GND is ground signal)
16.17.18.19. Screw holes for fixing the panel and the back box.
User ’s Manual User ’s Manual
2. Connect all the necessary wires, then install
the Panel into the 2 gang box and fix it with
screws(As shown in Figure 2)
Back of Panel
1. Embed 2 gang box on the wall first and
fix it with screws (As shown in Figure 1）
3. Finally, paste the black Acrylic sheet shown in
Figure 3 on the Panel.
1
2
3
