Toastmaster TC17D3 User manual

Foodservice Equipment
Job ________ Item# ________
1400 Toastmaster Drive, Elgin IL 60120-9272 USA - Tel: [phone] - Fax: [phone] - www.toastmastercorp.com
Conveyor Toaster
Model TC17D3 & TC17D3-FEC (Front Extended Conveyor)
Form 131 Rev 0 (02/05)
Application
TC17D3 Series Conveyor Toasters
are designed to uniformly toast
breads, buns, bagels, and muffins
in large quantities, using continuous
feed methods.
General Information
Product Height:
•Extra-Tall 3” (76 mm) high
opening.
Conveyor Type:
•TC17D3 - Conveyor extends to
the end of the toasting chamber.
•TC17D3-FEC -Conveyor extends
7” (178 mm) beyond the end of
the toasting chamber. Available in
front only.
Product Loading:
•TC17D3 is equipped with a
loading rack that is angled to feed
the product into the toaster
continuously.
•TC17D3-FEC has a front
extended conveyor for easier
loading of larger bakery products.
Product Delivery:
•Both models are capable of rear-
exit pass through operation. They
are shipped as front-return
models, but can easily be
converted to rear-exit operation
by following the supplied
instructions.
Safety
Unique air flow design keeps case,
top, and sides cool. The unit is
equipped with an auto cool down
feature which allows the fan to cool
the outer skin when the unit is
turned off.
Construction
Steel construction with a stainless
steel finish is used for durability. A
stainless steel full-length, slide out
crumb tray for easy clean-up. A
fiberglass return tray is included.
Electrical
Available in 120V, 208V or 240V, A/
C, 1-phase only. Total rated input is
1.97 kW at 120V; 2.62 kW at 208V
and 240V; and 2.41 kW for 230V
CE toasters.A factory installed 6 ft
(1.8 m) cord is included.
Heating
When control is set to “ON”, top and
bottom tubular elements will turn on
to toast both sides of bread.
Lightness and darkness of the
product is achieved by adjusting the
top and bottom heat controls.
Standby position allows for energy
savings during non-peak periods.
Controls
Rotary 3-position dial selects ON/
OFF/ STANDBY positions. A
conveyor speed dial controls the
belt speed. Heat dials control the
upper and lower heating elements.
Accessories
Fiberglas return tray.
Angled loading rack (supplied with
TC17D3)
Horizontal loading rack (optional)
Stainless steel tray (optional) fits
both models as an exit tray. May
also be used as a loading tray for
TC17D3-FEC.
Warranty
Warranty includes one year parts
and labor, on-site service. (U.S.A.
only).
Ordering Information
ETL versions 120V, 208V or 240V,
1-phase, 50/60 Hz.
CE versions 230V, 1-phase, 50/60
Hz.
CONVEYOR TOASTER - MODELS TC17D3 & TC17D3-FEC

INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE.
Toastmaster, in line with its policy to continually improve its product, reserves the right to change materials or specifications without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased equipment.
1400 Toastmaster Drive, Elgin IL 60120-9272 USA- Tel: [phone] - Fax: [phone] - www.toastmastercorp.com
Conveyor Toaster
Models TC17D3 & TC17D3-FEC (Front Extended Conveyor)
Form 131 Rev 0 (02/05)
CONVEYOR TOASTER - MODELS TC17D3 & TC17D3-FEC