Tommee Tippee Perfect Prep User manual

Check the water level and
regularly top up when necessary
with cold water. When filling the
tank with water, ensure the hopper
is in place.
Turn the dial to select the feed size
you require (4fl oz –11fl oz).
Position your sterilised bottle under
the spout. Adjust bottle stand if
necessary (bottle neck should sit
close to the spout).
Press the start/stop button.
A red light will flash and a volume
of hot water is dispensed into your
bottle.
8
Remove the milk storage lid and
replace your bottle onto the bottle
stand.
11
Always check that the amount
dispensed is consistent with the
size of feed you have selected on
the dial (by adding formula, your
feed will appear larger than the feed
size chosen). Add the sterilised teat,
screw ring and hood and shake.
12 13
For your child’s safety always check
food temperature before feeding by
testing on a sensitive part of your
skin.
Your bottle is now ready to serve.
Make sure you discard any
unwanted feed as per the formula
manufacturer’s recommendation.
Press the start/stop button again.
The red light will go out and the
green light will flash. If this button is
not pressed within 2 minutes of the
hot water being dispensed a long
beep will sound. If the alarm sounds
you should discard the feed and
repeat the process from step 1.
Wait whilst the remainder of water is
dispensed. Once completed, there
will be a double beep and the green
light will change to solid.
1 2 3
2. USAGE
Before each use you must ensure that your water tank is above the minimum fill mark.
Always use cold water when filling the water tank, other than when cleaning.
HOW TO STOP THE PERFECT PREP™ MACHINE
If at any point you need to stop the Perfect Prep machine you can do so by pressing the start/stop button. The pump may
continue to run for a few seconds and the green light will illuminate to show that the process has ended.
It will not be possible to restart the machine for 20 seconds. If you have to stop the Perfect Prep machine, please discard of
any incomplete feed.
The light will change to solid red
and there will be a double beep to
indicate the end of the first stage.
You will need to make up your feed
within 2 minutes.
Carefully remove the bottle from the
stand and measure the correct
number of formula scoops into the
bottle.
Screw the sterilised milk storage lid
onto the bottle and ensure that the
lid is tight. Be careful when handling
hot liquid.
Shake well until the formula powder
has dissolved.
4 5 6 7
910 11
12 13
WARNING LIGHTSACTION BUTTONS
WATER TANK
HOT
WATER LEVEL
LOW
DE-CALC /
DE-SCALE
CLEANING
MODE
K
L
M
N
CHANGE
FILTER
J
CLEANING
MODE
O
FILTER
VOLUME
RESET
P
DE-CALC /
DE-SCALE
Q
SETUP
As with any other method of making up a feed, it’s essential that good hygiene practices are observed in the use
and maintenance of yourPerfect Prep machine. Ensure yourhands and all surfaces that come in to contact with
the machine and its components are clean, and that the unitis away from direct sunlight and heat sources.
REGULAR CLEANING: For hygiene and safety reasons you should clean youruniton a regular basis. We recommend you carry
this out at leastevery 4 weeks, whenever you replace your filter or if the machine has been unused for a period of 7 days.
234
Place a container under the
dispenser spout tocapture the water
used toclean the system (ideally at
least 1.8 litre capacity).
Plug in the unit, the tank empty
warning light will illuminate.
Fill the water tank with freshly
boiled water.
Wait for the tank empty warning
light to go out. The water tank hot
light will illuminate.
5 6 7 8
Press the cleaning mode button and
hold for 2 seconds. The cleaning
mode light will illuminate.
Allow the cycle to fully complete with
boiled water dispensing into the
container that you placed underneath
during step 1.
The tank empty warning light will
illuminate once the water has
flushed through the system.
Discard the contents from the
container used and place it back
under the dispenser spout.
1
13
24
57
6 8
11
12
Without removing the hopper from the machine and still holding the filter
by the top, place the filter in the hopper, ensuring it locks in to place.
Fill the hopper with cold water.Wait for the tank empty warning
light to go out.
Set the dial to 4oz with container
under the dispenser spout.
Press the start/stop button. A red
light will flash.
13 14
The appliance will dispense an
amount of hot water.
Press the start/stop button again.
A green light will flash and an amount
of water will be dispensed tofinish
the cycle. Discard the contents of the
container. Fit the bottle stand.
Your machine is now ready to use.
• Remove the filter from the
packaging
• Remove sticker from the top of filter
• Fill a bowl with cold tap water
• Fully submerge the filter in the water
• Gently agitate until the bubbles stop
9a 9b
10 11
13 14 15
Press the filter volume reset button
for 2 seconds toclear the memory.
15
12
FILTER
VOLUME
RESET
Handling the filter
by the top only:
The Perfect Prep should be kept in a cool dry location,
avoiding direct sunlight and keeping away from warm
appliances. This is recommended to avoid the water tank
temperature getting too warm.
Don’t worry if your temperature light does illuminate, as we
have some tips for you:
HOW TO KEEP THE TANK COOL
Flush your cold tap for 10 seconds before filling the
water tank.
1
Regularly top up with cold water rather than letting a
full tank stand and warm for long periods of time.
2
Keep a cold jug of tap water in the fridge ready totop
up the tank.
3

FOR DOMESTIC USE ONLY - NOT INTENDED FOR COMMERCIAL USE
WATER
HOPPER
G
WATER
FILTER
H
WATER
TANK
I
START / STOP
BUTTON
A
DISPENSER
SPOUT
C
WARNING
LIGHTS
D
ACTION
BUTTONS
E
BOTTLE
STAND
F
SETTING
DIAL
B
perfect prep™machine
INSTRUCTIONS FOR USE
(these instructions and cleaning videos can be found at tommeetippee.com)
DOS
It is essential that good hygiene practices are observed in the use and maintenance of your Perfect Prep machine.
✔ Ensure your hands and all surfaces that come in to contact with the machine and its components (including filter) are clean.
✔ This product is intended for use with Tommee Tippee Closer to Nature Perfect Prep Water Filters which are available
from all Perfect Prep machine stockists.
USE OF ANY OTHER WATER FILTER WITH THIS PRODUCT COULD PUT YOUR CHILD’S HEALTH AT RISK.
✔ Before first use clean the unit following the set up steps provided in this leaflet.
✔ Keep the unit away from direct sunlight.
✔ Only use cold tap water during regular use.
✔ Keep the outside of the unit clean.
✔ For your childs safety always check the food temperature before feeding on a sensitive part of your skin.
✔ Be careful when handling boiling water.
✔ Always adjust the height of the bottle stand so the bottle neck is close to the dispensing spout. This is to maintain the
temperature of the water and to avoid any splashes.
✔ Keep well clear of the dispensing spout as the unit produces steam and very hot water.
DON’TS
✘ Do not allow the water tank to be contaminated. The inside of the unit should only be cleaned by following the cleaning
process steps provided in this leaflet.
✘ Do not clean with solvents or harsh chemicals.
✘ The appliance is intended for use in a kitchen. It is not suitable for use in a nursery.
✘ Do not use hot water other than during cleaning cycles. If water in the tank is higher than 25°C, the unit will not operate.
If this happens, either change the water or allow the water to cool and restart.
✘ Do not pour boiling water over the water filter.
✘ When topping up the hopper, do not fill beyond the max line.
✘ Be careful not to spill any water on the outside of the machine.
✘ Do not remove the back panel from the unit.
IMPORTANT WARNINGS!
Keep this instruction sheet for future reference as it
includes important information.
This appliance is intended for household use only. Do
not use outdoors. Before plugging in the Perfect Prep
for the first time ensure that the voltage is compatible
with your electricity supply by checking the label on the
base of the unit. Ensure water has been added to the
unit before switching the unit on. Do not immerse in
water. To protect against fire, electric shock and injury
to persons. Do not immerse cord, plugs or other parts
of the unit in water or other liquid. Misuse of the product
may result in the risk of fire, electric shock and/or
personal injury. This appliance shall not be used by
children. Keep the appliance and its cord out of reach of
children. Appliances can be used by persons with
reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
User maintenance other than cleaning and descaling is
not required for this product. Cleaning and user
maintenance shall not be made by children.
Do not touch hot surfaces. When in use the Perfect
Prep contains hot water and steam. Keep hands away
from dispensing spout as it can cause burns and
scalds. Use in a well ventilated area. Do not operate
any appliance with a damaged cord or plug or after
the appliance malfunctions or has been damaged in
any manner. If the supply cord is damaged it must be
changed by a qualified person in order to avoid a
hazard. If the damage is from new the unit must be
returned to the manufacturer. If within a retail warran-
ty period this product should be exchanged at place
of purchase. The manufacturer will then be made
aware. Any questions? Visit our website
www.tommeetippee.com.
Always use on a flat heat resistant surface. Do not
move appliance when in use. Do not let the cord hang
over edge of kitchen work surface or touch hot
surfaces. The product has been fitted with a cord wind
on the rear of the unit to allow you to adjust the length
of the cord safely. It is recommended that the cord be
kept as short as possible. Do not use any accessories
other than those supplied with this appliance.
DO’SAND DON’TS
A red warning lightwill illuminate when the unit requires descaling soon.
If the light flashes, you should descale immediately
Remove the filter.
Fill the water tank with 0.5 litres of clear white vinegar (food grade).
Place a suitable container under the spout.
Press the descale button for 2 seconds. The system will now run a descale process.
During this process the red descale light will continue toflash.
At the end of the descale process a beep will sound and the descale light will switch off.
The red cleaning mode light will now flash.
Follow the SET UP steps 1-15(no need to use step 9a or 12 if refitting current filter)
DESCALING
Thedescaling process will remove deposits of calcium and other minerals in the system that may affect its
performance.
1
2
3
4
5
6
7
0423708
INFORMATIONONTHE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
For proper disposal for treatment, recovery and recycling, please take these products to designated collection points where they will be accepted on a free of charge basis. In some countries you may be able to return your productsto your
local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from
inappropriate waste handling. Please contact your local authority for further details of your nearest collection point for WEEE. Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
The product is fitted with a BS 1363 mains plug containing a 13Afuse. If it ever becomes necessary to replace the fuse, only use fuses that are marked BS 1362, and rated at 13A. Inthe unlikely event that this plug is not suitable for the
sockets in your home, it should be removed and a suitable plug fitted as follows: The wires of the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW –EARTH
BLUE – NEUTRAL
BROWN – LIVE
As these colours may not correspond with the coloured markings sometimes used to identify the terminals in the plug, connect as follows. The wire coloured GREEN AND YELLOW must be connected tothe terminal marked E or by the earth
symbol or coloured GREEN or GREEN AND YELLOW. The wire coloured BLUE must be connected tothe terminal marked N or coloured BLACK. Thewire coloured BROWN must be connected tothe terminal marked L or coloured RED. If
you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualified electrician.
Jackel International Limited trading as Mayborn Group, Northumberland Business Park West, Cramlington Northumberland NE23 7RH, UK
Made in China
12
Plug in the unit, the empty tank
warning light will illuminate (L).
An alternative option is to use 1 litre of
clear/ white (food grade) vinegar.
Top up the water tank tothe max line
with freshly boiled water and place a
suitable container under the
dispenser spout (C).
Press the cleaning button (O) on
the side of the machine for 2
seconds. The cleaning mode light
will illuminate.
CLEANING
Place a suitably sized container
under the spout (C).
Press the cleaning mode button for
2 seconds to empty the tank.
Remove the old filter and discard
(dispose of the filter in general
household waste).
Follow CLEANING steps followed
by SET UP steps 1-15.
12 3 4
REPLACING YOUR FILTER
We recommend that you complete a cleaning cycle, whenever you replace your Tommee Tippee water filter.
Yourunit comes with a Tommee Tippee water filter which lasts 150 litres (thisis approximately 3 months based on
6 x 260ml feeds per day). Replacement Tommee Tippee water filters are available from all Perfect Prep stockists.
Using this machinewithout a water filter orwith anon Tommee Tippee water filter could put your child’s health at risk.
We recommend you complete a cleaning cycle every 4 weeks, whenever you replace your Tommee Tippee water filter
or if the machine has been unused for a period of 7 days.
TIP: carry out the cleaning process when your tank empty light is illuminated (L) so there’s no need to discard any water.
Once thisisdone, insert the hopper and follow SET UP steps 1-15 (no need to use step 9a or 12 if re-fitting current
Tommee Tippee filter).
2
4
8
You can re-start the cycle by pressing
the cleaning button again (O). Allow
the cycle to fully complete. Discard the
contents from the container used.
Remove lid, hopper (G) and
bottle stand (F) and set filter
to one side (top side down).
Clean the external machine surface
with a clean cloth (we advise to use
an antibacterial solution), taking care
to clean in all grooves and under the
dispenser spout (C). At this time the
hopper (G), lid and bottle stand (F)
should also be cleaned using hot
soapy water, rinsed thoroughly, and
allowed to dry naturally (do not use
cloths or tea towels to dry).
1
Using a cold water
sterilising solution
(following manufacturer
guidelines for using 1.8 litres of
water) add required amount to the
the water tank.
Fill the water tank to the max line
with cold water and place a
suitable container under the
dispenser spout (C).
TIP: If using a container less than
1.8 litres capacity you can press
the start button (A) to pause the
cleaning cycle, allowing you to
discard of the contents.
3a 3b
5
A solid red light will illuminate as
an early warning, so you can make
sure you have a replacement filter
ready for when it needs changing.
When the red light flashes,
replace the filter.