3.4 TO SET A BLEND ONLY CYCLE: Use the jug with no basket, ensure correct orientation
with lid.
i. Press the function button and choose blend option. Set the blend time using
the +/- buttons. Maximum blend time of 2 minutes.
ii. Press the select button to start. The unit will now run a blend cycle. To control the texture
of the food a pulse blend can be used by pressing the pulse/blend button.
4. When the cycle has finished the unit will beep, the LCD display will turn o. During
steaming water will collect in the jug. In stage 1 weaning, where food consistency should
be a smooth puree, we recommend that you stir in this nutrient rich water. In later weaning
stages, when thicker textures are required, we would recommend removing some/all of this
water depending on your baby’s preference. Steam and blend separately with the addition
of the steam basket and there will be no water mixed with the food. Leave the unit to stand
for 2 mins before unlocking jug and decanting food into storage. Take care when removing
the jug and lid as steam may still be present and jug hot to touch.
5. Turn unit o at the power supply and unplug the unit. Disassemble blade from the jug and
wash all parts in warm soapy water.
6. If preparing another batch of food straight away, make sure that you top up the water tank
with more water. You must wait for the unit to cool before topping up the water tank.
STERILISING
The machine will prompt you to run the sterilising cycle every time you turn on the unit. If you
prefer to follow the instructions on how to operate the Baby Food Maker, please visit
our website: www.tommeetippee.com
We recommend that you run a sterilisation cycle before first use and before batch cooking.
1. Ensure the tank is filled up to the max line. Unlock water tank by rotating lid anti-clockwise,
fill water tank with 350ml of cold water, replace cap and lock in place. Ensure the water
level is not filled above the inside edge of the water tank.
2.
Ensure the steaming basket is in place and the lid is placed in the correct position. Lock the
jug in place using the locking dial.
3. Plug unit into mains power supply, the unit will beep. Press the power button, the sterilising
icon will flash. Press select button and the unit will now run a steam sterilising cycle.
4. The sterilisation process will last 12 minutes, the ‘cool down’ icon will flash for
2 minutes, and the unit will beep when the cycle is completed.
STERILISING COMPONENTS
It is important that all accessories are clean and fully rinsed in fresh water before placing the
appliance for sterilisation.
The steriliser of accessories is designed for use with small items like soothers or bottle teats.
To sterilise components, place the accessories in the steaming basket and run the
sterilising programme.
WARMUP
Four storage pots are included in your box. We recommend using these pots to store and
warm up the food prepared using your Baby Food Maker. Using dierent plastic storage
pots might result in dierent warm up times and results may vary.
1. Place the storage pot with the lid loosely placed on top inside the steaming basket.
Make sure the lid of the food storage pot is not completely sealed.
2. Place the lid on jug. Ensure the lid is placed in the correct position. Lock the jug in place using
the locking dial.
3. Plug unit into mains power supply, the unit will beep. Press the power button.
4. Press the function button and choose the warm up option. Set the warmup time using
the +/- buttons. Maximum warmup time of 20 minutes.
5. Press the select button to start. The unit will now start a warmup cycle.
6. The cool-down icon will flash for
2 minutes
, and the unit will beep when the
cycle is completed.
DEFROST
Always use the storage pots provided to store and freeze the food prepared using your
Baby Food Maker.
1.
Place the storage pot with the lid loosely placed on top inside the steaming basket.
Make sure the lid of the food storage pot is not completely sealed.
2.
Ensure the tank is filled up to the max line. Unlock water tank by rotating lid
anti-clockwise, fill water tank with 350ml of cold water, replace cap and lock in place. Ensure
the water level is not filled above the inside edge of the water tank.
3.
Place the lid on jug. Ensure the lid is placed in the correct position. Lock the jug in place using
the locking dial.
4.
Plug unit into mains power supply, the unit will beep. Press the power button.
5.
Press the function button and choose the defrost option. Set the defrost time using
the +/- buttons. Maximum defrost time of 40 minutes.
6.
Press the select button to start. The unit will now start a defrost cycle.
7.
The cool-down icon will flash for
2 minutes
, and the unit will beep when the cycle
is completed.
PULSE/BLEND BUTTON
The unit is intended for blending pre-cooked ingredients, blending liquids and soft fruits.
The unit is not designed to blend hard ingredients such as ice cubes. Make sure the jug is not filled
past the MAX line marked on the jug. Refer to the blending times table for guidance on dierent
food textures.
1.
Use the jug with no basket, ensure correct orientation with lid.
2.
Put the ingredients in the jug.
3.
Lock the jug in place using the locking dial.
4.
Press the pulse button. Maximum pulse blending time of 30 seconds. Do not keep the pulse
button pressed for more than 30 seconds. If it is operated for more than 30 seconds let the
unit cool down for at least 2 minutes before operating again.
5.
When finished, unlock and remove the jug.
6.
Remove the blended food from the jug, use the spatula provided if required.
When you press the pulse button, the unit will run in cycles – blending for 5 seconds
and pausing for 2 seconds. This is to stop it from overheating.
EXTRA FUNCTIONS
PAUSE
To pause while mid cycle, press the select button once, the unit will beep and the display will flash.
This will pause the cycle indefinitely. The jug can be removed during this time however it will be hot
so wait until it is cool. Press the select button to continue the cycle.
CANCEL
To stop a cycle while mid cycle, press the power button for three seconds until unit turns o.
SMART MEMORY FUNCTION
If using the Baby Food Maker again within 30 minutes of the last use you can press the power button
to switch the unit on, then press and hold ‘+’ and ‘-‘ button at the same time for 3 seconds, press the
start button
again and it will repeat the last cycle. Please note that the smart memory function cannot be used
with 3.2 steam and blend with basket.
WATER TANK EMPTY
The water tank icon will flash on the LCD display when the tank is empty.
COOLING DOWN
The cooling down icon will flash when the machine is cooling down before the end of each cycle.
Make sure you wait until the cycle is finished before removing the jug and opening the lid.
