Too Copic ABS-1N Guide

For questions or comments contact us at Imagination International, Inc.
Copic Markers [phone], or at copicmarker.com
Copyright © 2014 Imagination International, Inc. All Rights Reserved
• Use in an area with good air circulation.
• Copic markers are alcohol based. Keep away from open flame.
• Do not spray on people or animals.
• Air Cans are under pressure. Do not puncture.
COPIC Airbrush
System Warning
180
1
2
3
4
180
5
180
Set includes:
Air Grip Air Hose Air Adaptor Air Can 180 Air Can Holder
1. Remove the cap from the Air Adaptor
and screw the Air Adaptor into the base of
the Air Grip.
2. Attach the Air Hose to the base of the
Air Adaptor.
3. Unscrew the top valve most of the way
out. Attach the Air Can nozzle to the hose.
4. Screw the valve back in to activate the
Air Can.
Note: When you are done using the Air
Can, unscrew the top valve on the air hose
before removing from the Air Can.
5. Insert your favorite Copic Classic or
Sketch marker into the Air Grip as shown,
with the broad nib pointing up, then press
the finger pad to spray.
Put your Air Can
in the Holder to
keep it upright
Push to
spray
USING ABS-1N
AIRBRUSH SYSTEM

For questions or comments contact us at Imagination International, Inc.
Copic Markers [phone], or at copicmarker.com
Copyright © 2014 Imagination International, Inc. All Rights Reserved
• Use in an area with good air circulation.
• Copic markers are alcohol based. Keep away from open flame.
• Do not spray on people or animals.
• Air Cans are under pressure. Do not puncture.
COPIC Airbrush
System Warning
D60
2
1
D60
Air Grip Air Can D-60
Set includes:
1. Remove the cap from the Air Can
D-60 and screw the Air Can into the
base of the Air Grip.
2. Insert your favorite Copic Classic or
Sketch marker into the Air Grip as
shown, with the broad nib pointing up,
then press the finger pad to spray.
Push to
spray
The Air Can D-60 is
the only Air Can that
can connect directly
to the Air Grip
USING ABS-2
AIRBRUSH SYSTEM

For questions or comments contact us at Imagination International, Inc.
Copic Markers [phone], or at copicmarker.com
Copyright © 2014 Imagination International, Inc. All Rights Reserved
• Use in an area with good air circulation.
• Copic markers are alcohol based. Keep away from open flame.
• Do not spray on people or animals.
COPIC Airbrush
System Warning
1. Remove the cap from the Air Adaptor and
screw the Air Adaptor into the base of the Air
Grip.
2. Attach the Air Hose to the base of the Air
Adaptor.
3. Insert your favorite Copic Classic or
Sketch marker into the Air Grip as shown,
with the broad nib pointing up, then press the
finger pad trigger to spray.
Copic carries the Sparmax Mini Air
Compressor - an oil-less compressor with
water trap and pressure gauge. Approximate
weight: 8lbs. Included is an air hose of the
correct size.
You can order the Sparmax Mini Air Compressor from Copic
or connect the air hose to your own hose. If the hose you own
is not compatible, you can order an air hose from Copic.
Sparmax Air
Compressor with
ABS-3 airbrush
attachment
Set Includes:
Air Grip Air Adaptor
Push to
spray
1/8 hose from
air compressor
USING ABS-3
AIRBRUSH SYSTEM